UTILITIES SUPERVISOR up to 3K AED++ for an Investment Company in Abu Dhabi
INR7"YEARLY"
UTILITIES SUPERVISOR up to 3K AED++ for an Investment Company in Abu DhabiFull Time (2-6 Yrs )Confidential |
Abu Dhabi
United Arab Emirates
United Arab Emirates
0abu dhabi
|
22-03-2019 2019-06-20Open to any nationalityMale, 25 - 35 years old Bachelor degree in Mechanical EngineeringMinimum 2 years of experience in Manufacturing IndustryExperienced in handling a team Experience with steam boiler, air compressor, and ammonia chiller plantWorking knowledge of handling plant utilities operation and maintenance for ATLAS COPCO air compressor, fire tube boiler, ammonia chiller plant including screw compressors, pumps, Cooling towerCan perform maintenance and repair services for Chillers, AHU, Cooling towers, compressed air systems, water pump system, heat exchangersMust be able to perform all required maintenance works including emergency repairs, assembly and overhauling activities in accordance with the specifications subject to the supervisor approvalPerform the maintenance / corrective maintenance according to preventive maintenance scheduleCheck, monitor and record all activities, temperature and pressures gauges readings as per log sheetKnowledge of Equipment Problems Trouble-shooting and Basic Root Cause Analysis and Development of SolutionsEnsure mechanical operations, standards and controls are maintained at high qualityGood communication skillsCan join immediately (1-month max)Work Location: KIZAD, Abu DhabiSalary up to 3,000 AED depending on experience and qualifications plus accommodation and transportationPlease send your updated CV in Word Format with your recent PHOTO to:BNCFBJOBS2020 AT GMAIL DOT COM NOTE: Use UTILITIES SUPERVISOR as Email Subject2019-03-22 22:05:24 |
Apply Now |
Mechanical Engineer Turbines
INR7"YEARLY"
Mechanical Engineer TurbinesFull Time (11-15 Yrs )Candidate LLC |
Abu Dhabi
United Arab Emirates
United Arab Emirates
0abu dhabi
|
22-03-2019 2019-06-20Job DescriptionBrief of the jobOperates two stations in UAN premise, namely E&W station and Station B.Currently we have vacancy of one mechanical engineer in E&W station. E&W station is a combination of 8XST+ 2XGT in power station and 11 desalination plant in water station. Mechanical engineer will be responsible to maintain all rotating equipment in power, water and BOP. Job ResponsibilitiesExperience 10 years experience in Design and Maintenance of static equipment.; including four years working in a large steam turbine power generation plant.
4 years Hands-on experience on boiler maintenance including pressure vessels, safety valves and so on.
Work on CMMS, experience on Middle East are plus.QualificationsEducation
Bachelor in Mechanical Engineering
Certification
Welding Inspection
NDT Level-II
Training
Material and Metallurgy
Heat Treatment aspects
Structural analysisCompetencies Good knowledge about ASME standards and codes.
Good knowledge on structural analysis, heat treatment methods, material and metallurgy.
Ability to prepare WPS and PQR.
Knowledge about radiant boilers; firing principle, tube material, inspection and maintenance criterion, chemical cleaning process and so on.
Practical experience on maintaining pressure vessels and other pressure equipment.
Practical experience on maintaining vertical oriented vessels; ie, crude oil tanks, distillate tanks etc.
Excellent inter-personal, communication and report writing skill.
Must be able to work independently and to bridge cultural differences.
Ability to coordinate and direct and influence others. He should show capability of leadership. Reporting Line Direct : Maintenance Division ManagerSupervisory Responsibility
Direct : Contractors
Indirect : Maintenance supervisors/ Technicians
Physical Effort
60% while supervising important work, risk work, modification work etc.
Work Environment
40% in A/C office work.
60% working in field.
Regularly called out after working hours.Languages
Good knowledge of written and spoken English.Technology
Able to work in an IT environment.Other
Ability to work efficiently in a broad cultural spectrum.Location:
Based in Abu Dhabi / UAEJob Level: TechnicalEmployee Status: Regular- 2 years contractSchedule: Full-timePrimary Location: Abu Dhabi /United Arab Emirates.
RequirementsExperience 10 years experience in Design and Maintenance of static equipment.; including four years working in a large steam turbine power generation plant.
4 years Hands-on experience on boiler maintenance including pressure vessels, safety valves and so on.
Work on CMMS, experience on Middle East are plus.QualificationsEducation
Bachelor in Mechanical Engineering
Certification
Welding Inspection
NDT Level-II
Training
Material and Metallurgy
Heat Treatment aspects
Structural analysisCompetencies Good knowledge about ASME standards and codes.
Good knowledge on structural analysis, heat treatment methods, material and metallurgy.
Ability to prepare WPS and PQR.
Knowledge about radiant boilers; firing principle, tube material, inspection and maintenance criterion, chemical cleaning process and so on.
Practical experience on maintaining pressure vessels and other pressure equipment.
Practical experience on maintaining vertical oriented vessels; ie, crude oil tanks, distillate tanks etc.
Excellent inter-personal, communication and report writing skill.
Must be able to work independently and to bridge cultural differences.
Ability to coordinate and direct and influence others. He should show capability of leadership. Reporting Line Direct : Maintenance Division ManagerSupervisory Responsibility
Direct : Contractors
Indirect : Maintenance supervisors/ Technicians
Physical Effort
60% while supervising important work, risk work, modification work etc.
Work Environment
40% in A/C office work.
60% working in field.
Regularly called out after working hours.Languages
Good knowledge of written and spoken English.Technology
Able to work in an IT environment.Other
Ability to work efficiently in a broad cultural spectrum.Location:
Based in Abu Dhabi / UAEJob Level: TechnicalEmployee Status: Open - Ended ContractSchedule: Full-timePrimary Location: Abu Dhabi /United Arab Emirates.Apply directly to [HIDDEN TEXT]2019-03-22 22:05:23 |
Apply Now |
Mechanical Engineer Static Equipment
INR7"YEARLY"
Mechanical Engineer Static EquipmentFull Time (11-15 Yrs )Candidate LLC |
Abu Dhabi
United Arab Emirates
United Arab Emirates
0abu dhabi
|
22-03-2019 2019-06-20Job DescriptionBrief of the jobOperates two stations in UAN premise, namely E&W station and Station B.Currently we have vacancy of one mechanical engineer in E&W station. E&W station is a combination of 8XST+ 2XGT in power station and 11 desalination plant in water station. Mechanical engineer will be responsible to maintain all rotating equipment in power, water and BOP.
Job ResponsibilitiesArea of responsibilityThe Mechanical Engineer is responsible for:
Maintaining E&W station static equipment in terms of short and long time scheduling.
Maintaining/ Developing PM/ PDM schedule of concerned equipments.
Trouble shooting and root cause analysis of failed equipment.
Maintaining technical/ HSE international standards in performing the tasks at workplace.
Updating inventory level by timely ordering the items, preparing reports for major maintenance activities, coordinating with sections, preparing and participating on tendering and service contracts.
Attending yearly budget preparation and controlling the expenses. Principal functionsThe mechanical engineer will have following major activities. Maintenance of ST, boiler, GT, Auxiliary boiler, Distiller and BOP static equipment including structures in the station.
Comply with industrial standards to maintain plant equipment.
Develop and implement risk based maintenance strategy.
Prepare SOW, initiate tender documents, follow-up procurement process and implementation of contracts.
Quality control according to industrial standards for contracts and regular maintenance in the station.
Troubleshooting and RCA of failures.
Ordering of spares in time to maintain minimum stock level.
Prepare and maintain records / history of maintenance activities.
Coordinate with the Maintenance Manager, Training Manager and Lead Mechanical Maintenance Engineer to review and re-evaluate the staff qualification (PQR) system of the Mechanical maintenance section.
Setting standards for plant maintenance, utilizing technical advice available both internally and externally and ensuring that standards are effectively communicated;
Leading and motivating Engineers in the team to develop commercially driven teams setting appropriate people and plant related performance measures
Assisting in the preparation of a budget and providing regular reports of expenditure, explaining variances, identifying potential risks and/or problems and recommending solutions;
Ensuring all procedures, documentation, drawings and manuals are kept up to date and any additional training is completed in a timely manner;
Delivering high levels of commercial availability, safely and efficiently within environment limits whilst maintaining high standards of management and leadership;
Delivering outcomes in all areas of work that are consistent with the Quality, Health, Safety and Environmental policies;
Delivering planned generation and availability targets within budget by ensuring highly effective maintenance regimes.
Involves working with other departments within an organization such as purchasing, finance, store, IT to ensure the Mechanical equipment is maintained in accordance to the organizations quality standards in a timely and cost-effective manner. RequirementsExperience 10 years experience in Design and Maintenance of static equipment.; including four years working in a large steam turbine power generation plant.
4 years Hands-on experience on boiler maintenance including pressure vessels, safety valves and so on.
Work on CMMS, experience on Middle East are plus.QualificationsEducation
Bachelor in Mechanical Engineering
Certification
Welding Inspection
NDT Level-II
Training
Material and Metallurgy
Heat Treatment aspects
Structural analysisCompetencies Good knowledge about ASME standards and codes.
Good knowledge on structural analysis, heat treatment methods, material and metallurgy.
Ability to prepare WPS and PQR.
Knowledge about radiant boilers; firing principle, tube material, inspection and maintenance criterion, chemical cleaning process and so on.
Practical experience on maintaining pressure vessels and other pressure equipment.
Practical experience on maintaining vertical oriented vessels; ie, crude oil tanks, distillate tanks etc.
Excellent inter-personal, communication and report writing skill.
Must be able to work independently and to bridge cultural differences.
Ability to coordinate and direct and influence others. He should show capability of leadership. Reporting Line Direct : Maintenance Division ManagerSupervisory Responsibility
Direct : Contractors
Indirect : Maintenance supervisors/ Technicians
Physical Effort
60% while supervising important work, risk work, modification work etc.
Work Environment
40% in A/C office work.
60% working in field.
Regularly called out after working hours.Languages
Good knowledge of written and spoken English.Technology
Able to work in an IT environment.Other
Ability to work efficiently in a broad cultural spectrum.Location:
Based in Abu Dhabi / UAEJob Level: TechnicalEmployee Status: Open Ended ContractSchedule: Full-timePrimary Location: Abu Dhabi /United Arab Emirates.2019-03-22 22:05:23 |
Apply Now |
Mechanical Engineer Rotating Equipment
INR7"YEARLY"
Mechanical Engineer Rotating EquipmentFull Time (11-15 Yrs )Candidate LLC |
Abu Dhabi
United Arab Emirates
United Arab Emirates
0abu dhabi
|
22-03-2019 2019-06-20Job DescriptionBrief of the jobTwo stations in UAN premise, namely E&W station and Station B.E&W station is a combination of 8XST+ 2XGT in power station and 11 desalination plant in water station. Mechanical engineer will be responsible to maintain all rotating equipment in power, water and BOP.
Job ResponsibilitiesArea of responsibilityThe Mechanical Engineer is responsible for:
Maintaining E&W station rotating equipment in terms of short and long time scheduling.
Maintaining/ Developing PM/ PDM schedule of concerned equipments.
Trouble shooting and root cause analysis of failed equipment.
Maintaining technical/ HSE international standards in performing the tasks at workplace.
Updating inventory level by timely ordering the items, preparing reports for major maintenance activities, coordinating with sections, preparing and participating on tendering and service contracts.
Attending yearly budget preparation and controlling the expenses. Principal functionsThe mechanical engineer will have following major activities. ST and GT main and auxiliarys maintenance.
Troubleshooting and maintenance of all types of pumps; single stage/ multi stage high flow/ pressure pump (including boiler feed water pump), sea water pumps, condensate pumps, vacuum pumps, compressor, FD fans, cooling air fans etc.,
Ordering of spares in time to maintain minimum stock level.
Condition monitoring and reporting of rotating equipment.
Prepare SOW, initiate tender documents, follow-up procurement process and implementation of contracts.
Prepare and maintain records / history of maintenance activities.
Coordinate with the Maintenance Manager, Training Manager and Lead Mechanical Maintenance Engineer to review and re-evaluate the staff qualification (PQR) system of the Mechanical maintenance section.
Setting standards for plant maintenance, utilizing technical advice available both internally and externally and ensuring that standards are effectively communicated;
Leading and motivating Engineers in the team to develop commercially driven teams setting appropriate people and plant related performance measures
Assisting in the preparation of a budget and providing regular reports of expenditure, explaining variances, identifying potential risks and/or problems and recommending solutions;
Ensuring all procedures, documentation, drawings and manuals are kept up to date and any additional training is completed in a timely manner;
Delivering high levels of commercial availability, safely and efficiently within environment limits whilst maintaining high standards of management and leadership;
Delivering outcomes in all areas of work that are consistent with the Quality, Health, Safety and Environmental policies;
Delivering planned generation and availability targets within budget by ensuring highly effective maintenance regimes.
Involves working with other departments within an organization such as purchasing, finance, store, IT to ensure the Mechanical equipment is maintained in accordance to the organizations quality standards in a timely and cost-effective manner.
RequirementsExperience 10 years experience in the Mechanical Maintenance department in a large steam turbine power generation plant.
5 years Hands-on experience on OH/ troubleshooting of mechanical defects (seals, bearings, balancing, alignment etc.) of large multistage feed water pumps, variable speed coupling, Turbine major overhauling etc.
2 years practical experience on condition monitoring (vibration analysis), reporting, root cause analysis, investment justification etc.
Work on CMMS, experience on RCM, experience on Middle East is plus.QualificationsEducation
Bachelors in mechanical engineeringCertificationCondition monitoring, ISO Level- 2TrainingRotating equipment theory and practical
Alignment Technologies
Bearing (Friction/ antifriction) Technologies
Lubrication theory and practiceCompetencies Sound technical knowledge of the maintenance of Mechanical equipment and systems of ST/ open cycle power plants, which allow him to rapidly identify potential technical issues on site during the execution, to investigate and discuss those issues with his team.
Excellent inter-personal, communication and report writing skill.
Must be able to work independently and to bridge cultural differences.
Ability to coordinate and direct and influence others. He should show capability of leadership.Reporting Line Direct : Maintenance Division ManagerSupervisory Responsibility Direct : Contractors
Indirect : Maintenance supervisors/ TechniciansPhysical Effort
60% while supervising important work, risk work, modification work etc.Work Environment
40% in A/C office work.
60% working in field.
Regularly called out after working hours.Languages
Good knowledge of written and spoken English.Technology
Able to work in an IT environment.Other
Ability to work efficiently in a broad cultural spectrum.Location:
Based in Abu Dhabi / UAEJob Level: TechnicalEmployee Status: Open - Ended contractSchedule: Full-timePrimary Location: Abu Dhabi /United Arab Emirates.Apply directly to [HIDDEN TEXT]2019-03-22 22:05:23 |
Apply Now |
Mechanical Engineer Static Equipment
INR7"YEARLY"
Mechanical Engineer Static EquipmentFull Time (11-15 Yrs )Candidate LLC |
Abu Dhabi
United Arab Emirates
United Arab Emirates
0abu dhabi
|
22-03-2019 2019-06-20Job DescriptionBrief of the jobOperates two stations in UAN premise, namely E&W station and Station B.Currently we have vacancy of one mechanical engineer in E&W station. E&W station is a combination of 8XST+ 2XGT in power station and 11 desalination plant in water station. Mechanical engineer will be responsible to maintain all rotating equipment in power, water and BOP.
Job ResponsibilitiesArea of responsibilityThe Mechanical Engineer is responsible for:
Maintaining E&W station static equipment in terms of short and long time scheduling.
Maintaining/ Developing PM/ PDM schedule of concerned equipments.
Trouble shooting and root cause analysis of failed equipment.
Maintaining technical/ HSE international standards in performing the tasks at workplace.
Updating inventory level by timely ordering the items, preparing reports for major maintenance activities, coordinating with sections, preparing and participating on tendering and service contracts.
Attending yearly budget preparation and controlling the expenses. Principal functionsThe mechanical engineer will have following major activities. Maintenance of ST, boiler, GT, Auxiliary boiler, Distiller and BOP static equipment including structures in the station.
Comply with industrial standards to maintain plant equipment.
Develop and implement risk based maintenance strategy.
Prepare SOW, initiate tender documents, follow-up procurement process and implementation of contracts.
Quality control according to industrial standards for contracts and regular maintenance in the station.
Troubleshooting and RCA of failures.
Ordering of spares in time to maintain minimum stock level.
Prepare and maintain records / history of maintenance activities.
Coordinate with the Maintenance Manager, Training Manager and Lead Mechanical Maintenance Engineer to review and re-evaluate the staff qualification (PQR) system of the Mechanical maintenance section.
Setting standards for plant maintenance, utilizing technical advice available both internally and externally and ensuring that standards are effectively communicated;
Leading and motivating Engineers in the team to develop commercially driven teams setting appropriate people and plant related performance measures
Assisting in the preparation of a budget and providing regular reports of expenditure, explaining variances, identifying potential risks and/or problems and recommending solutions;
Ensuring all procedures, documentation, drawings and manuals are kept up to date and any additional training is completed in a timely manner;
Delivering high levels of commercial availability, safely and efficiently within environment limits whilst maintaining high standards of management and leadership;
Delivering outcomes in all areas of work that are consistent with the Quality, Health, Safety and Environmental policies;
Delivering planned generation and availability targets within budget by ensuring highly effective maintenance regimes.
Involves working with other departments within an organization such as purchasing, finance, store, IT to ensure the Mechanical equipment is maintained in accordance to the organizations quality standards in a timely and cost-effective manner. RequirementsExperience 10 years experience in Design and Maintenance of static equipment.; including four years working in a large steam turbine power generation plant.
4 years Hands-on experience on boiler maintenance including pressure vessels, safety valves and so on.
Work on CMMS, experience on Middle East are plus.QualificationsEducation
Bachelor in Mechanical Engineering
Certification
Welding Inspection
NDT Level-II
Training
Material and Metallurgy
Heat Treatment aspects
Structural analysisCompetencies Good knowledge about ASME standards and codes.
Good knowledge on structural analysis, heat treatment methods, material and metallurgy.
Ability to prepare WPS and PQR.
Knowledge about radiant boilers; firing principle, tube material, inspection and maintenance criterion, chemical cleaning process and so on.
Practical experience on maintaining pressure vessels and other pressure equipment.
Practical experience on maintaining vertical oriented vessels; ie, crude oil tanks, distillate tanks etc.
Excellent inter-personal, communication and report writing skill.
Must be able to work independently and to bridge cultural differences.
Ability to coordinate and direct and influence others. He should show capability of leadership. Reporting Line Direct : Maintenance Division ManagerSupervisory Responsibility
Direct : Contractors
Indirect : Maintenance supervisors/ Technicians
Physical Effort
60% while supervising important work, risk work, modification work etc.
Work Environment
40% in A/C office work.
60% working in field.
Regularly called out after working hours.Languages
Good knowledge of written and spoken English.Technology
Able to work in an IT environment.Other
Ability to work efficiently in a broad cultural spectrum.Location:
Based in Abu Dhabi / UAEJob Level: TechnicalEmployee Status: Open Ended ContractSchedule: Full-timePrimary Location: Abu Dhabi /United Arab Emirates.2019-03-22 22:04:26 |
Apply Now |
Chemist Koudiet
INR7"YEARLY"
Chemist KoudietFull Time (5-6 Yrs )General Electric |
Algiers
,
Not Mentioned
algiers
0algiers
Algeria
Not Mentioned
algeria
0algeria
|
22-03-2019 2019-06-20Chemist will advise and coordinate with the Customer s team to ensure effective and efficient operation of Water Treatment Plant, regular and effective water, steam and fuel analysis and in house effluent & emission monitoring to adhere to the standards of regulatory authorities.
The person will monitor and advise customer to take measures to maintain the chemistry of water and steam systems including boiler chemistry within the prescribed Limits.
Essential Responsibilities:
o Advise Customer to monitor and maintain water, steam and waste water chemistry within the limits prescribed by the Original Equipment Manufacturer and applicable regulations
o Advise the Customer s team to operate the water treatment plant and chemical dosing systems to meet the treated water and steam quality specifications as required by the Original Equipment Manufacturer and applicable regulations
o Advise Customer to analyze periodic samples of lubricants, fuel oil, fuel gas, etc, whenever required.
o Support O&M Advisory Management team and the Customer to manage inventory of all type of chemicals to be used at plant site
o Maintain adequate inventory personal protection equipment (chemical suits, chemical resistant shoes, respirators etc.) for GE team and advise Customer to manage the same for Customer s staff
o Advise the Customer to supervise unloading and handling of all chemicals supplied by the vendors
o Understand OH&S risks / hazards and environmental / legislative aspect / impacts related to work activities and advise the Customer on the same.
o Advise and support Customer s team to issue Confined Space Entry, Gas Free Certificate etc., as and when required under the Plant Safety rules for on-going jobs.
o Advise the Customer to manage all plant hazardous waste in accordance with plant EHS policy.
o Raise work orders for required operational preventative and corrective maintenance
o Advise the Customer s team to maintain records and reports related maintenance works.
o Assess plant needs for chemical section and generate material requisitions and ensure timely procurement of the same through close coordination with Sourcing Specialist and GE O&M Advisory Leadership team.
o Co-ordinate with Customer s Warehouse team for adequate inventory management by using Computerized Maintenance Management System
o Ensure compliance with GE and Customer s EHS policies, programs & procedures as applicable
o Advise the Customer for control of all maintenance documents as outlined in site Quality Management System
o Advise and guide Customer team to implement a comprehensive set of procedures covering all aspects of water treatment and chemical and waste management
o Ensure compliance with requirements for environmental, health and safety requirements in applicable plant operation advisory activities.
o Ensure implementation of Log-Out/Tag Out (LOTO) System by the Customer in accordance with the Customer s policies and procedures in line with provisions of the O&M Contract.
o Co-ordinate with GE O&M Centre of Excellence (CoE) team, GE Engineering and other O&M support team for the resolution of complex issues relevant to plant chemistry,
o Ensure preparation and submission of Plant water treatment and chemistry related updates as per requirements of the contract.
o Support timely completion of plant root cause analysis for the technical events.
o Support site GE O&M Advisory team to ensure optimal availability, reliability, and budgetary performance while driving Customer value and GE/Customer productivity.
o Conduct the training and qualification of Customer s operations and maintenance team as per guidelines of the contract.
o Recommend Facility modifications and upgrades to the Customer to enhance plant reliability and performance.
o Any other job assigned to him by management.2019-03-22 21:16:27 |
Apply Now |
Mechanical Engineer Turbines
INR7"YEARLY"
Mechanical Engineer TurbinesFull Time (11-15 Yrs )Candidate LLC |
Abu Dhabi
United Arab Emirates
United Arab Emirates
0abu dhabi
|
21-03-2019 2019-06-19Job DescriptionBrief of the jobOperates two stations in UAN premise, namely E&W station and Station B.Currently we have vacancy of one mechanical engineer in E&W station. E&W station is a combination of 8XST+ 2XGT in power station and 11 desalination plant in water station. Mechanical engineer will be responsible to maintain all rotating equipment in power, water and BOP. Job ResponsibilitiesExperience 10 years experience in Design and Maintenance of static equipment.; including four years working in a large steam turbine power generation plant.
4 years Hands-on experience on boiler maintenance including pressure vessels, safety valves and so on.
Work on CMMS, experience on Middle East are plus.QualificationsEducation
Bachelor in Mechanical Engineering
Certification
Welding Inspection
NDT Level-II
Training
Material and Metallurgy
Heat Treatment aspects
Structural analysisCompetencies Good knowledge about ASME standards and codes.
Good knowledge on structural analysis, heat treatment methods, material and metallurgy.
Ability to prepare WPS and PQR.
Knowledge about radiant boilers; firing principle, tube material, inspection and maintenance criterion, chemical cleaning process and so on.
Practical experience on maintaining pressure vessels and other pressure equipment.
Practical experience on maintaining vertical oriented vessels; ie, crude oil tanks, distillate tanks etc.
Excellent inter-personal, communication and report writing skill.
Must be able to work independently and to bridge cultural differences.
Ability to coordinate and direct and influence others. He should show capability of leadership. Reporting Line Direct : Maintenance Division ManagerSupervisory Responsibility
Direct : Contractors
Indirect : Maintenance supervisors/ Technicians
Physical Effort
60% while supervising important work, risk work, modification work etc.
Work Environment
40% in A/C office work.
60% working in field.
Regularly called out after working hours.Languages
Good knowledge of written and spoken English.Technology
Able to work in an IT environment.Other
Ability to work efficiently in a broad cultural spectrum.Location:
Based in Abu Dhabi / UAEJob Level: TechnicalEmployee Status: Regular- 2 years contractSchedule: Full-timePrimary Location: Abu Dhabi /United Arab Emirates.
RequirementsExperience 10 years experience in Design and Maintenance of static equipment.; including four years working in a large steam turbine power generation plant.
4 years Hands-on experience on boiler maintenance including pressure vessels, safety valves and so on.
Work on CMMS, experience on Middle East are plus.QualificationsEducation
Bachelor in Mechanical Engineering
Certification
Welding Inspection
NDT Level-II
Training
Material and Metallurgy
Heat Treatment aspects
Structural analysisCompetencies Good knowledge about ASME standards and codes.
Good knowledge on structural analysis, heat treatment methods, material and metallurgy.
Ability to prepare WPS and PQR.
Knowledge about radiant boilers; firing principle, tube material, inspection and maintenance criterion, chemical cleaning process and so on.
Practical experience on maintaining pressure vessels and other pressure equipment.
Practical experience on maintaining vertical oriented vessels; ie, crude oil tanks, distillate tanks etc.
Excellent inter-personal, communication and report writing skill.
Must be able to work independently and to bridge cultural differences.
Ability to coordinate and direct and influence others. He should show capability of leadership. Reporting Line Direct : Maintenance Division ManagerSupervisory Responsibility
Direct : Contractors
Indirect : Maintenance supervisors/ Technicians
Physical Effort
60% while supervising important work, risk work, modification work etc.
Work Environment
40% in A/C office work.
60% working in field.
Regularly called out after working hours.Languages
Good knowledge of written and spoken English.Technology
Able to work in an IT environment.Other
Ability to work efficiently in a broad cultural spectrum.Location:
Based in Abu Dhabi / UAEJob Level: TechnicalEmployee Status: Open - Ended ContractSchedule: Full-timePrimary Location: Abu Dhabi /United Arab Emirates.Apply directly to [HIDDEN TEXT]2019-03-21 21:29:38 |
Apply Now |
Mechanical Engineer Rotating Equipment
INR7"YEARLY"
Mechanical Engineer Rotating EquipmentFull Time (11-15 Yrs )Candidate LLC |
Abu Dhabi
United Arab Emirates
United Arab Emirates
0abu dhabi
|
21-03-2019 2019-06-19Job DescriptionBrief of the jobTwo stations in UAN premise, namely E&W station and Station B.E&W station is a combination of 8XST+ 2XGT in power station and 11 desalination plant in water station. Mechanical engineer will be responsible to maintain all rotating equipment in power, water and BOP.
Job ResponsibilitiesArea of responsibilityThe Mechanical Engineer is responsible for:
Maintaining E&W station rotating equipment in terms of short and long time scheduling.
Maintaining/ Developing PM/ PDM schedule of concerned equipments.
Trouble shooting and root cause analysis of failed equipment.
Maintaining technical/ HSE international standards in performing the tasks at workplace.
Updating inventory level by timely ordering the items, preparing reports for major maintenance activities, coordinating with sections, preparing and participating on tendering and service contracts.
Attending yearly budget preparation and controlling the expenses. Principal functionsThe mechanical engineer will have following major activities. ST and GT main and auxiliarys maintenance.
Troubleshooting and maintenance of all types of pumps; single stage/ multi stage high flow/ pressure pump (including boiler feed water pump), sea water pumps, condensate pumps, vacuum pumps, compressor, FD fans, cooling air fans etc.,
Ordering of spares in time to maintain minimum stock level.
Condition monitoring and reporting of rotating equipment.
Prepare SOW, initiate tender documents, follow-up procurement process and implementation of contracts.
Prepare and maintain records / history of maintenance activities.
Coordinate with the Maintenance Manager, Training Manager and Lead Mechanical Maintenance Engineer to review and re-evaluate the staff qualification (PQR) system of the Mechanical maintenance section.
Setting standards for plant maintenance, utilizing technical advice available both internally and externally and ensuring that standards are effectively communicated;
Leading and motivating Engineers in the team to develop commercially driven teams setting appropriate people and plant related performance measures
Assisting in the preparation of a budget and providing regular reports of expenditure, explaining variances, identifying potential risks and/or problems and recommending solutions;
Ensuring all procedures, documentation, drawings and manuals are kept up to date and any additional training is completed in a timely manner;
Delivering high levels of commercial availability, safely and efficiently within environment limits whilst maintaining high standards of management and leadership;
Delivering outcomes in all areas of work that are consistent with the Quality, Health, Safety and Environmental policies;
Delivering planned generation and availability targets within budget by ensuring highly effective maintenance regimes.
Involves working with other departments within an organization such as purchasing, finance, store, IT to ensure the Mechanical equipment is maintained in accordance to the organizations quality standards in a timely and cost-effective manner.
RequirementsExperience 10 years experience in the Mechanical Maintenance department in a large steam turbine power generation plant.
5 years Hands-on experience on OH/ troubleshooting of mechanical defects (seals, bearings, balancing, alignment etc.) of large multistage feed water pumps, variable speed coupling, Turbine major overhauling etc.
2 years practical experience on condition monitoring (vibration analysis), reporting, root cause analysis, investment justification etc.
Work on CMMS, experience on RCM, experience on Middle East is plus.QualificationsEducation
Bachelors in mechanical engineeringCertificationCondition monitoring, ISO Level- 2TrainingRotating equipment theory and practical
Alignment Technologies
Bearing (Friction/ antifriction) Technologies
Lubrication theory and practiceCompetencies Sound technical knowledge of the maintenance of Mechanical equipment and systems of ST/ open cycle power plants, which allow him to rapidly identify potential technical issues on site during the execution, to investigate and discuss those issues with his team.
Excellent inter-personal, communication and report writing skill.
Must be able to work independently and to bridge cultural differences.
Ability to coordinate and direct and influence others. He should show capability of leadership.Reporting Line Direct : Maintenance Division ManagerSupervisory Responsibility Direct : Contractors
Indirect : Maintenance supervisors/ TechniciansPhysical Effort
60% while supervising important work, risk work, modification work etc.Work Environment
40% in A/C office work.
60% working in field.
Regularly called out after working hours.Languages
Good knowledge of written and spoken English.Technology
Able to work in an IT environment.Other
Ability to work efficiently in a broad cultural spectrum.Location:
Based in Abu Dhabi / UAEJob Level: TechnicalEmployee Status: Open - Ended contractSchedule: Full-timePrimary Location: Abu Dhabi /United Arab Emirates.Apply directly to [HIDDEN TEXT]2019-03-21 21:29:38 |
Apply Now |
boiler Sales Specialist
INR7"YEARLY"
Boiler Sales SpecialistFull Time (5-6 Yrs )Sushaan Synergies LLP |
Oman
Not Mentioned
oman
0oman
|
13-03-2019 2019-06-11Responsible for business of boilers and other related products for the organisation- Make presentations to customers on products and service capabilities- Participate in commercial negotiation with clients- Get approvals of drawings and documents from customers- Ensure on time manufacture and dispatch of products as committed to customers- Ensure timely collection of dues- Manage sales through dealers and other channel partners- Set targets for dealers and make joint visits to customers as required- Build relationships with industrial consultants and help them in bidding stage- Get market feedback and suggestions for product improvement- Participate in exhibitions and seminars to showcase the product and solution offering2019-03-13 22:16:42 |
Apply Now |
UTILITIES SUPERVISOR up to 3K AED++ for an Investment Company in Abu Dhabi
INR7"YEARLY"
UTILITIES SUPERVISOR up to 3K AED++ for an Investment Company in Abu DhabiFull Time (2-6 Yrs )Confidential |
Abu Dhabi
United Arab Emirates
United Arab Emirates
0abu dhabi
|
11-03-2019 2019-06-09Open to any nationalityMale, 25 - 35 years old Bachelor degree in Mechanical EngineeringMinimum 2 years of experience in Manufacturing IndustryExperienced in handling a team Experience with steam boiler, air compressor, and ammonia chiller plantWorking knowledge of handling plant utilities operation and maintenance for ATLAS COPCO air compressor, fire tube boiler, ammonia chiller plant including screw compressors, pumps, Cooling towerCan perform maintenance and repair services for Chillers, AHU, Cooling towers, compressed air systems, water pump system, heat exchangersMust be able to perform all required maintenance works including emergency repairs, assembly and overhauling activities in accordance with the specifications subject to the supervisor approvalPerform the maintenance / corrective maintenance according to preventive maintenance scheduleCheck, monitor and record all activities, temperature and pressures gauges readings as per log sheetKnowledge of Equipment Problems Trouble-shooting and Basic Root Cause Analysis and Development of SolutionsEnsure mechanical operations, standards and controls are maintained at high qualityGood communication skillsCan join immediately (1-month max)Work Location: KIZAD, Abu DhabiSalary up to 3,000 AED depending on experience and qualifications plus accommodation and transportationPlease send your updated CV in Word Format with your recent PHOTO to:BNCFBJOBS2020 AT GMAIL DOT COM NOTE: Use UTILITIES SUPERVISOR as Email Subject2019-03-11 19:24:00 |
Apply Now |
UTILITIES SUPERVISOR up to 3K AED++ for an Investment Company in Abu Dhabi
INR7"YEARLY"
UTILITIES SUPERVISOR up to 3K AED++ for an Investment Company in Abu DhabiFull Time (2-6 Yrs )Confidential |
Abu Dhabi
United Arab Emirates
United Arab Emirates
0abu dhabi
|
11-03-2019 2019-06-09Open to any nationalityMale, 25 - 35 years old Bachelor degree in Mechanical EngineeringMinimum 2 years of experience in Manufacturing IndustryExperienced in handling a team Experience with steam boiler, air compressor, and ammonia chiller plantWorking knowledge of handling plant utilities operation and maintenance for ATLAS COPCO air compressor, fire tube boiler, ammonia chiller plant including screw compressors, pumps, Cooling towerCan perform maintenance and repair services for Chillers, AHU, Cooling towers, compressed air systems, water pump system, heat exchangersMust be able to perform all required maintenance works including emergency repairs, assembly and overhauling activities in accordance with the specifications subject to the supervisor approvalPerform the maintenance / corrective maintenance according to preventive maintenance scheduleCheck, monitor and record all activities, temperature and pressures gauges readings as per log sheetKnowledge of Equipment Problems Trouble-shooting and Basic Root Cause Analysis and Development of SolutionsEnsure mechanical operations, standards and controls are maintained at high qualityGood communication skillsCan join immediately (1-month max)Work Location: KIZAD, Abu DhabiSalary up to 3,000 AED depending on experience and qualifications plus accommodation and transportationPlease send your updated CV in Word Format with your recent PHOTO to:BNCFBJOBS2020 AT GMAIL DOT COM NOTE: Use UTILITIES SUPERVISOR as Email Subject2019-03-11 19:23:24 |
Apply Now |
boiler Technician
INR7"YEARLY"
Boiler TechnicianFull Time (5-10 Yrs )Habitat Hotel All Suites |
Jeddah
,
Saudi Arabia
Saudi Arabia
0jeddah
Khobar
Not Mentioned
khobar
0khobar
|
06-03-2019 2019-06-04boiler Technician
Urgently Required a ‘boiler Technician for a 5* Hotel with following skills and qualification.-maintain and supervise heating systems operations, with special responsibility for emergency service, maintenance of equipment, and installation. -Troubleshoot, supervise, and/or make repairs on gas and fuel pressure lines, boilers, heaters, pumps, compressors, motors, controllers, reducing station, heat exchangers.-Schedule and supervise external contractors hired for work related to heating systems.-Direct boiler work such as tube, header and brickwork, casing work and flue work.-Install heating system equipment as required.-Order oil and gas deliveries.-Inspect fuel tanks.-Prepare and maintain records on treatment, oil, gas and chemicals consumption and steam and hot water production.-Cooperate and work with State and other inspectors, as required.-Operate boilers and controls.-Train and supervise staff on operation and repair of equipment as assigned.-Participate in institutional professional development and training.-Perform other related duties as assigned. Educational qualification: Technical school graduation.Experience Required: 05 years preferably a 5* Hotel or any organizationJob location: Jeddah, Khobar2019-03-06 21:33:23 |
Apply Now |
Planning Manager Shutdown Turnarou
INR7"YEARLY"
Planning Manager Shutdown TurnarouFull Time (1-10 Yrs )Maptalent |
Jubail
Not Mentioned
jubail
0jubail
|
06-03-2019 2019-06-04maptalent are currently recruiting a Planning Manager for Shutdown and Turnaround who specializes in the overall management of Shutdown / Turnaround projects within onshore refinery or petrochemical plant.The Planning Manager will be responsible for corporate strategic operation planning and support across overlapping turnarounds / shutdowns. This role will also ensure and enhance the performance, productivity and profitability of all field operations activities.
REQUIREMENTS:
REQUIREMENTS: Bachelors Degree in Mechanical Engineering or equivalentMinimum 15 years of relevant experience in oil and gas / petrochemical related industries preferably in shutdown and turnaround activities related to Status Equipment (column, vessel, heat exchanger, heaters, chimney, waste heat boiler, re-boilers, etc).Must have experience in Turnaround package preparation, TAR management, Resource Management, Project Control Manage and Training & Development Robust knowledge in Primavera, resources loading, resources optimization, daily and sequential narration reports and project cost control2019-03-06 21:03:31 |
Apply Now |
Utilities Engineer Obour City
INR7"YEARLY"
Utilities Engineer Obour CityFull Time (3-5 Yrs )Lactalis Halawa |
Egypt
Not Mentioned
egypt
0egypt
|
28-02-2019 2019-05-29Management Responsibilities
• Propose and implement work processes, procedures and technical resources related to Industrial Services.
• Lead and coordinate the Industrial Service team and maintain competencies, motivation and performance to achieve the teams' mission and objectives.
• Propose and monitor Industrial Services in accordance with the key performance indicators.
• Demonstrate and promote the company's values within the Industrial Service team.
Functional Responsibilities:
• Ensure that there exists within the Industrial Services team an attitude of absolute intolerance for unsafe situations. That all team members are encouraged never to implement any change, whether directly instructed to, or under his own initiative, without first questioning its impact in relation to product safety/quality, people safety and the environment. No compromises should be tolerated.
• Monitor plant/equipment to ensure optimal operation and reduction of planned/unplanned downtime.
• Optimize Predictive Maintenance technologies (Condition Monitoring and inspections) to minimize unplanned downtime.
• Ensure that all utilities (air, gasses, water, steam, water conditioning chemicals) that come, or may accidentally come, in direct contact with products are treated according to acceptance criteria for product and processes.
• Ensure that all effort is directed towards a low cost, highly efficient operation.
• Ensure that Production, Quality Management and Engineering meet to discuss and resolve technical issues.
• Ensure that the Industrial Services are operated, maintained, distributed and inspected in accordance with all internal and external standards, regulations and audits (e.g. boiler house, ammonia systems, pressure vessels etc.).
• Ensure the efficient conversion of energy, treatment of water and the treatment and disposal of waste
• Ensure that all members of the Industrial Service team play an active role in assisting the client in improving the energy usage and reducing waste across the site through continual improvement initiatives.
• Ensure that the operators and mechanics are properly trained, have the correct certification and sufficient utilities process and equipment functional knowledge to run the Industrial Service utilities.
• Ensure that the core competencies in Industrial Services are maintained at all times.
• Ensure that the documentation is always up to date and both legal and Lactalis compliant. i.e. flow diagrams, HVAC Schematics, P&IDs, log sheets, equipment records, operating permits etc.
• Ensure that the correct safety systems and alarms have been installed, appropriate emergency plans have been established and that all relevant persons are regularly trained to handle emergencies.
• Manage all outsourced activities relating to Industrial Services.
• Drive the energy and environmental reporting system.
• Responsibilities relating to the installation of new Industrial Service assets:
• Ensure that new installations are designed with a high degree of flexibility to better enable the operations to adjust to a changing environment keeping in mind safety and the issues relating to the environment
• Ensure that all new installations are energy-efficient and where appropriate include low emission burner technologies.
Key Performance Indicators
• Energy consumption per ton of production.
• Energy consumption per ton of steam.
• Water consumption per ton of production
job requirements
3 to 5 years
Bachelor's Degree at least
Dairy FMCG Food and Beverage Production2019-02-28 21:05:18 |
Apply Now |
Energy and Combustion Engineer Dubai, United Arab Emirates
INR7"YEARLY"
Energy and Combustion Engineer Dubai, United Arab EmiratesFull Time (5-7 Yrs )Harris Pye Engineering Group |
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
25-02-2019 2019-05-26Overview
The group is actively seeking to recruit the following personnel for their DMCC office, Dubai, UAE:
Energy and Combustion Engineer
Job Purpose:
• To support the process engineering team in the daily activities, in relation to projects and enquiries for process engineering and boiler plant systems
• Mentor junior and graduate engineers and help them develop process engineering and project-relevant skills
Key Accountabilities:
• Support the organization in the ongoing projects and enquiries, and be responsible for the process engineering scope, interacting with vendors, clients and other project stakeholders
Key Responsibilities:
• Thermal Design of superheated and saturated steam water-tube boilers and HRSG s
• Design of fire-tube boilers and smoke tube waste heat boilers
• Thermal and mechanical design of heat exchangers and fired heaters
• Design of waste heat recovery systems, both new and retrofit, in industrial system as well as in the marine sector (e.g. WHRU on marine engines), and capability to size systems based on innovative technologies in the field
• Design and specification of boiler auxiliaries, including but not limited to fuel trains and fuel handling systems, sootblowers and knocking devices for heating surface cleaning, economizers (both new and retrofit), flue gas treatment equipment (to meet emission requirements, e.g. IED)
• Design and specification of Balance of Plant equipment such as deaerators, blowdown tanks, condensers (air and water cooled), selection of steam traps and specification of steam turbines
• Preparation of feasibility studies, including ROI calculations (PBT, NPV, IRR, etc.)
• Preparation of H&MB, PFDs, and P&IDs, including drafting, if required
• Pressure drop and line sizing calculations
• Preparation of process engineering documentation, e.g. calculation reports, equipment lists, line lists, valve lists, consumption lists, process descriptions, functional descriptions/control philosophies
• Preparation of equipment specifications and datasheets, instrument datasheets, pump datasheets, pressure vessel datasheets, etc.
• Sizing of control valves, pressure relief/safety valves and interface with vendors, where required
• Preparation of emergency shutdown philosophies, cause & effect diagrams, I/O Lists and process control narratives, control system specifications, as well as interfacing with control system vendors
• Mechanical design of process equipment, heat exchangers and boilers according to international engineering standards (ASME Sec. VIII Div. 1 & 2, Sec. I, EN 13445, EN 12952, etc.)
• Preparation of PED documentation for NoBo approval and issue of CE Marking (e.g. ESR, Risk Assessments and Operating Manuals, PMA s)
• Preparation or collaboration in the development of pipe specifications, valve specification
• Material selection for vessels, heat exchangers, piping and piping components, based on process conditions
• Estimation of hours required for engineering tasks and preparation of proposals for engineering studies and projects
• Steam cycle optimization and steam system studies/troubleshooting
• Prepare specifications for burners and combustion equipment and interact/integrate designs in the design of boiler furnaces or HRSG s (duct burners)
• Support the technical department, business development managers, repair and commissioning teams in enquiries and process/mechanical calculations, typically carried out on urgent basis
• Inspection, testing and troubleshooting of boilers, HRSG s and heat exchangers in power plants, industrial plants as well as offshore
• Preparation of procedures for testing, inspecting, and commissioning of boilers, HRSG s and waste heat recovery systems
• Preparation of the basic engineering package for bidding purposes
• Preparation of Material Take-Offs for equipment fabrication, for bidding, etc.
• Checking and review of process engineering documentation, both in the FEED and in the detailed design phases
• Checking and review of mechanical design documents, layout drawings, fabrication drawings and calculation reports
• Preparation and development of plant layouts and plot plans
• Participation in HAZOP and LOPA/SIL safety reviews, preparation of reports and follow-up on actions
• Hazardous Area zoning and preparation of zoning drawings
• Preparation of Operation and Maintenance Manuals for plant and process equipment
• Interface with other disciplines as well as with project managers and engineers on multi-discipline projects2019-02-25 20:51:30 |
Apply Now |
boiler Engineer
INR7"YEARLY"
Boiler EngineerFull Time (6-10 Yrs )Thermal Power Plant |
Saudi Arabia (saudi Arabia)
Not Mentioned
saudi arabia (saudi arabia)
0saudi arabia (saudi arabia)
|
25-02-2019 2019-05-26boiler EngineerQualification: Bsc in Mechanical EngineerExperience: Should have Minimum 6 years’ Experience in Thermal Power Plant as boiler maintenance engineer for 300 MW or above steam unit.Proficiency in MS Office and other computer skills.Â
Responsible for conducting and supervising field activities during overhauls, projects, and construction activities.Responsible for commissioning of plant equipmentNationality: Indian
Email Id: rec9@asmacs.net2019-02-25 20:39:03 |
Apply Now |
Plant Operator-Concrete
INR7"YEARLY"
Plant Operator-ConcreteFull Time (2-5 Yrs )Dewan Consultants Pvt. Ltd |
Saudi Arabia (saudi Arabia)
Not Mentioned
saudi arabia (saudi arabia)
0saudi arabia (saudi arabia)
|
25-02-2019 2019-05-26Maintain record of everyday readings for all compressors and processing equipments and ensure optimal level of production.Monitor all plant production and processing equipment’s.Resolve all operating issues in same and perform regular periodic maintenance on all equipments.Collaborate with contractors and vendors for all activities.Manage all communication on operation issues between management and coworkers.Provide training to all contractors and vendors and participate in safety meetings.Monitor all safety issues for company safety supervisor.Prepare and submit all purchase order requisitions and maintain all plant operations and ensure compliance to all policies and regulations.Ensure work site free of any wastage and maintain neat and clean plant site.Manage all boilers and associate auxiliary equipments and maintain all plant operations.Maintain all boiler operations safely and manage all power consumption.2019-02-25 20:38:40 |
Apply Now |
Plant Operator
INR7"YEARLY"
Plant OperatorFull Time (3-8 Yrs )Rajani Exports |
Saudi Arabia (saudi Arabia)
Not Mentioned
saudi arabia (saudi arabia)
0saudi arabia (saudi arabia)
|
25-02-2019 2019-05-26Maintain record of everyday readings for all compressors and processing equipments and ensure optimal level of production.Monitor all plant production and processing equipment’s.Resolve all operating issues in same and perform regular periodic maintenance on all equipments.Collaborate with contractors and vendors for all activities.Manage all communication on operation issues between management and coworkers.Provide training to all contractors and vendors and participate in safety meetings.Monitor all safety issues for company safety supervisor.Prepare and submit all purchase order requisitions and maintain all plant operations and ensure compliance to all policies and regulations.Ensure work site free of any wastage and maintain neat and clean plant site.Manage all boilers and associate auxiliary equipments and maintain all plant operations.Maintain all boiler operations safely and manage all power consumption.Manage all plant operation and emission data and maintain safety and efficiency in plant and provide training to all subordinates. Hiring Location: Mumbai2019-02-25 20:38:27 |
Apply Now |
Maintenance supervisor
INR7"YEARLY"
Maintenance supervisorFull Time (3-5 Yrs )Client of G.Gheewala |
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
19-03-2019 2019-06-17Responsibilities:
Maintenance supervisior is responsible for the day-to day operation of plants.
Repair and troubleshooting of industrial equipment such as conveyors, facility equipment such as air compressors, boiler, cooling tower, R/O &DI plant, Generators, Motors, Switch-gears and Inter-locking systems in a PLC-controlled environment
Responsible for doing Preventive maintenance Task allocated for respective areas.
Responsible for maintaining plant equipment always Healthy.
Enforces plant rules consistently, develops methods for lowering plant costs, maintains standards as set forth by department managers, maintains effective communication with all workers,
Enforces safety and EHS, and carry out duties with all safety standards.
Must be knowledgeable of manufacturing practices. Must be an excellent communicator and good listener. Treat others with Honesty, dignity, respect and encourage teamwork.
Enforces plant rules consistently, develops methods for lowering plant costs, maintains effective communication with workers, enforces safety and EHS 10,000%
Contribute to the identification of opportunities for continuous improvement of processes and practices taking into account best practice , improvement of business processes, cost reduction and productivity improvement.
To identify and manage asset reliability risks that could adversely affect plant or business operations .
able to train and develop subordinates. Must be detail-oriented and good problem solver
Plant Emergency Equipment are well maintained and make sure critical spares are maintained in plant always.
Qualifications:
Candidate should have a Full time Bachelor of engineering Degree Mechanical /Electrical /Electronics with a 3 years hands-on experience in the field.
OR
Candidate should have a Diploma Mechanical/Electrical Engineering with a 5 years hands-on experience in the maintenance, repair and troubleshooting of industrial equipment
He should be well-versed in reading and interpreting pneumatic and hydraulic schematic diagrams.
He should be well-versed in reading and interpreting electrical diagrams and had worked with S5/S7 PLC and SCADA.
Should have Worked in continuous running plant2019-03-19 22:02:14 |
Apply Now |
