Protection & Automation Electrical design Engineer
INR7"YEARLY"
Protection & Automation Electrical Design EngineerFull Time (7-12 Yrs )Larsen & Toubro Ltd |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
07-02-2019 2019-05-08Job Description for Protection & Automation Electrical design Engineer :
Graduate in Electrical engineering with 7 to 12 years’ experience in EHV Substation from 132kV up to 400kV and above. Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Analyze and determine how planned modifications will interact with in-place protection and controls. Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with IUSA TM standards. Must be conversant in Review/design SCADA point indexes, contractor provided HMI screens/settings for all capital projects and design IED Data Maps.2019-02-07 05:30:00 |
Apply Now |
Civil design Engineer
INR7"YEARLY"
Civil Design EngineerFull Time (7-12 Yrs )Larsen & Toubro Ltd |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
06-02-2019 2019-05-07Civil design EngineerGraduate in /Civil engineering with 7 to 12 years of experience in design functions of large EPC projects of GIS substations from 132 kV up to 400 kV.Exposure to International Standards like IEC, ANSI, IEEE is mandatory. Must be conversant with layout preparation, scheme development, CT/VT calculation, battery/aux. trafo / cable sizing, lighting design, relay setting calculations etc., with good exposure to software like AP/PSCAD/CYMEGRD/CYMCAP. Excellent Communication Skills with construction supervision experience & Pre-Bid Stage engineering experience will be an advantage.2019-02-06 05:30:00 |
Apply Now |
Senior design Manager
INR7"YEARLY"
Senior Design ManagerFull Time (1-10 Yrs )Atkins Middle East |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
06-02-2019 2019-05-07The overall responsibility and duties under this role is to manage, guide, recommend, advise, instruct the master plan designer, the preliminary design consultant (if any), the appointed PMCs / Contractors and O&M teams during all the design phases (conceptual to final), during construction implementation and report possible design issues and recommendations to the client.Specific ResponsibilitiesMoreover, advise the client on Master Planning requirements for design, construction and operational stages that align with the program requirements and the general program vision.This role will have full oversight of the design Management team and all activities related to Sitewide Master Planning.Overall coordination and leadership of the design Management team, aligning on scope, identifying and filling the gaps and focusing on priorities.Effective management of integrated Master Plans, coordination with other Township Master Planners and any of the sub-tier master planners inputting into the overall Township(s) along with seamless integration between the districts ensuring that all design teams are made aware of the Master Plan requirements and are held to account to deliver in accordance with their remits.Managing the production of plot and block regulations by the Master Planners and fully adopted and incorporated in the Township(s).ProcurementPrepare and review scope briefs for procurement of Master Planner design consultants, align with the development leads in support of the consultant procurement process.Prepare briefs for master plan support roles and identify and fill scope gaps.PermittingWork with the employers team to build an effective permitting roadmap based on executive level discussions in respect to self-administered permitting.Monitor PMC and consultants resolution of permitting issues relating to plots at programme level, communicate priorities, risks, issues and changes across programme.PlanningManage and monitor (where managed by Township PMCs) the stage gate submittal process and monitor deliverables against tracking schedule, review consultants dashboards, schedules and coordinate high level issues log against what was committed.RiskMonitor risk and mitigation plans across the programme, highlight key areas that have potential to impact successful design progression.StakeholderMaster Planners, PMCs and programme level consultants; tracking master plan alterations and amendments e.g. changes to ROWs and plots access service roads etc.Impacts to delivery, jointly highlighting risks with mitigation strategies, coordinate plot and programme wide consultants respective activities.CommunicationsResponsible for effective communication between stakeholders through regular meetings across Townships (where more than one being managed), districts, plots and programme, control of the information repository within the PMIS including plot development criteria, brand standards, site information and other critical requirements to facilitate the design process.ReportingConduct periodic specific review meetings with Township PMC(s) and design teams, capture areas of concern and escalate as required. Ensure that programme level consultants are engaging effectively with Township teams.Report weekly on key master planning accomplishments and concerns, highlight risks that could impact the programme delivery.AssurancePeriodic analysis of design review process, ensure that consultants are complying and report on any non-compliances.
REQUIREMENTS:
The overall responsibility and duties under this role is to manage, guide, recommend, advise, instruct the master plan designer, the preliminary design consultant (if any), the appointed PMCs / Contractors and O&M teams during all the design phases (conceptual to final), during construction implementation and report possible design issues and recommendations to the client.Specific ResponsibilitiesMoreover, advise the client on Master Planning requirements for design, construction and operational stages that align with the program requirements and the general program vision.This role will have full oversight of the design Management team and all activities related to Sitewide Master Planning.Overall coordination and leadership of the design Management team, aligning on scope, identifying and filling the gaps and focusing on priorities.Effective management of integrated Master Plans, coordination with other Township Master Planners and any of the sub-tier master planners inputting into the overall Township(s) along with seamless integration between the districts ensuring that all design teams are made aware of the Master Plan requirements and are held to account to deliver in accordance with their remits.Managing the production of plot and block regulations by the Master Planners and fully adopted and incorporated in the Township(s).ProcurementPrepare and review scope briefs for procurement of Master Planner design consultants, align with the development leads in support of the consultant procurement process.Prepare briefs for master plan support roles and identify and fill scope gaps.PermittingWork with the employers team to build an effective permitting roadmap based on executive level discussions in respect to self-administered permitting.Monitor PMC and consultants resolution of permitting issues relating to plots at programme level, communicate priorities, risks, issues and changes across programme.PlanningManage and monitor (where managed by Township PMCs) the stage gate submittal process and monitor deliverables against tracking schedule, review consultants dashboards, schedules and coordinate high level issues log against what was committed.RiskMonitor risk and mitigation plans across the programme, highlight key areas that have potential to impact successful design progression.StakeholderMaster Planners, PMCs and programme level consultants; tracking master plan alterations and amendments e.g. changes to ROWs and plots access service roads etc.Impacts to delivery, jointly highlighting risks with mitigation strategies, coordinate plot and programme wide consultants respective activities.CommunicationsResponsible for effective communication between stakeholders through regular meetings across Townships (where more than one being managed), districts, plots and programme, control of the information repository within the PMIS including plot development criteria, brand standards, site information and other critical requirements to facilitate the design process.ReportingConduct periodic specific review meetings with Township PMC(s) and design teams, capture areas of concern and escalate as required. Ensure that programme level consultants are engaging effectively with Township teams.Report weekly on key master planning accomplishments and concerns, highlight risks that could impact the programme delivery.AssurancePeriodic analysis of design review process, ensure that consultants are complying and report on any non-compliances.2019-02-06 05:30:00 |
Apply Now |
Senior Interior design Engineer
INR500160005001-6000"YEARLY"
Senior Interior Design EngineerFull Time (10-16 Yrs )bestcv4me |
Al Madina Al Munawarah
,
Saudi Arabia
Saudi Arabia
0al madina al munawarah
Saudi Arabia
,
Not Mentioned
saudi arabia
0saudi arabia
Jeddah
,
Saudi Arabia
Saudi Arabia
0jeddah
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
05-02-2019 2019-05-06Do you want to work on one of the largest construction projects on the planet at this moment in time Do you feel that you have what it takes to contribute to this monumental development that spans the entire Kingdom of Saudi Arabia, encompassing in excess of 1.5M m2 and is spread across over 600 sites
Our client, a European engineering Management Company whom are held in the highest regard throughout the world and have been established for 60 years are renowned for their unrivalled customer focused project delivery.With headquarters based in Southern Europe and offices in located globally this your chance to become part of something special.
Right now we are seeking to recruit a number of experienced Senior Interior design Engineers who have an extensive background on multi-site construction ventures. If you are serious about taking your career to the next level and have the desire and capability to work on a 12 billion SAR programme we want to speak with you immediately.
As an integral part of the team will be tasked in contributing to the on time and delivery of the overall development. In order fulfil the tasks assigned to you by the client you will you have the expertise to perform the following duties:
Overall responsibility of running the Interior design engineering department
Source materials and create and maintain supplier contacts
Frame and structure proper Bills of Quantities ( BOQ)
Execute complete detailed drawings
Formulate mood boards, sample lists and brochures required for the execution of designs
Device efficient supervision of day today construction activities at every site
Co-ordinate with operations Manager for all design and constructions activities to maximize efficiency of operational aspects including kitchen design.
Ensure that construction is as per design. Rectify discrepancies; if any. It is the design engineers fundamental responsibility to ensure that the design is executed to maximum perfection.
In order to apply for this particular position it is essential that you possess the following:
A Degree / Masters from an internationally recognized University in the field of design / Interior design engineering.
A minimum of 10 years experience within a Senior Interior design Engineer
Be comfortable leading a multi-cultural team of Engineers.
Should constantly be in touch with all the latest trends in the industry and acquire all necessary skills necessary as the company keeps growing.
Fluency in both English and Arabic is essential for this position.
In order to apply for this particular position or any other position that you feel you may be suitable for please apply directly through www.bestcv4me.com for immediate consideration.2019-02-05 05:30:00 |
Apply Now |
Manager engineering
INR7"YEARLY"
Manager EngineeringFull Time (12-20 Yrs )Larsen & Toubro Ltd |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
05-02-2019 2019-05-06Manager ? engineering (design )Education Qualification Bachelor?s Degree in Electrical / Electronic engineeringMinimum Years of Experience: 12 to 20 Years, preferably Gulf experienceIndustry: Substations , PT&DJob Description /
Experiencea) Experience in EHV Substation designs from 132 Kv up to 400 Kv and above.b) 8 to 10 years as in engineering Lead Role.c) Interdisciplinary Co-ordination Experience between civil, Mechanical, Substation automation systems, Telecommunication systems.d) Profound experience in Substation Primary engineering and Handson experience in Secondary Protection engineering.e) design Progress Control & Monitoring.f) Profound experience in design reviews of GIS, Power Transformers, Reactors, Capacitor Banks, MV switchgear, AC/DC systems. Surge Arrestors, Terminal compound.g) Experience in Earthing, Lightning, Lighting designs. Etc.h) Liaison with Client/Consultant and Excellent Communication Skillsi) Candidates with GCC experience will be preferred.2019-02-05 05:30:00 |
Apply Now |
Civil design Engineer
INR7"YEARLY"
Civil Design EngineerFull Time (7-12 Yrs )Larsen & Toubro Ltd |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
04-02-2019 2019-05-05Civil design Engineer :Graduate in /Civil engineering with 7 to 12 years of experience in design functions of large EPC projects of GIS substations from 132 kV up to 400 kV. Exposure to International Standards like IEC, ANSI, IEEE is mandatory. Must be conversant with layout preparation,scheme development, CT/VT calculation, battery/aux. trafo / cable sizing, lighting design, relay setting calculations etc., with good exposure to software like AP/PSCAD/CYMEGRD/ CYMCAP. Excellent Communication Skills with construction supervision experience & Pre-Bid Stage engineering experience will be an advantage.2019-02-04 05:30:00 |
Apply Now |
Civil design Engineer
INR7"YEARLY"
Civil Design EngineerFull Time (7-12 Yrs )Larsen & Toubro Ltd |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
04-02-2019 2019-05-05Civil design Engineer :Graduate in /Civil engineering with 7 to 12 years of experience in design functions of large EPC projects of GIS substations from 132 kV up to 400 kV. Exposure to International Standards like IEC, ANSI, IEEE is mandatory. Must be conversant with layout preparation,scheme development, CT/VT calculation, battery/aux. trafo / cable sizing, lighting design, relay setting calculations etc., with good exposure to software like AP/PSCAD/CYMEGRD/ CYMCAP. Excellent Communication Skills with construction supervision experience & Pre-Bid Stage engineering experience will be an advantage.2019-02-04 05:30:00 |
Apply Now |
Automation Electrical design Engineer
INR7"YEARLY"
Automation Electrical Design EngineerFull Time (7-12 Yrs )Larsen & Toubro Ltd |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
04-02-2019 2019-05-05Protection & Automation Electrical design Engineer :
Graduate in Electrical engineering with 7 to 12 years’ experience in EHV Substation from
132kV up to 400kV and above. Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Analyze and determine how planned modifications will interact with in-place protection and controls.Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with IUSA TM standards.Must be conversant in Review/design SCADA point indexes, contractor provided HMI screens/settings for all capital projects and design IED Data Maps.2019-02-04 05:30:00 |
Apply Now |
Electrical design Engineer
INR7"YEARLY"
Electrical Design EngineerFull Time (6-12 Yrs )Larsen & Toubro Ltd |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
02-02-2019 2019-05-03Electrical design Engineer
Electrical Engineer with 6 to 12 years of design experience in the field of Extra High Voltage Substations ranging from 132kV or higher network levels, with the following experience profile.1) EHV Substation Primary engineering specialist with profound knowledge in Substation Equipment layouts involving Gas Insulated Switchgear, Power Transformers, Reactors, EHV cables, GIB, Auxiliary Systems etc..2) Exposure to International Standards like IEC, ANSI, IEEE. is mandatory.3) Should have been in design Team Position for 5 to 7 years4) Interdisciplinary engineering co-ordination experience with Civil/Mechanical is mandatory.5) Co-ordination experience in the field of Substation Secondary engineering Protection and Automation is preferable.6) Experience in the technical evaluation of Equipment proposals like 132kV GIS. Power Transformer, Reactors, MV Switchgear, EHV cables, and Auxiliary systems is mandatory.7) Preparation of Bill of materials, Equipment specifications and Technical Data Sheets.8) Experience of design co-ordination with third party design agencies and implementing effective Control and Monitoring of design deliverable as per Project schedules.9) Experience of liaison with Client Representatives, to expedite the design deliverables as per project schedules.10) Excellent Communication Skills with construction supervision experience will be an advantage.11) Pre-Bid Stage engineering experience will be an advantage.2019-02-02 05:30:00 |
Apply Now |
Manager engineering (design )
INR7"YEARLY"
Manager Engineering (Design )Full Time (12-20 Yrs )Larsen & Toubro Ltd |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
02-02-2019 2019-05-03Manager engineering (design )Education Qualification Bachelors Degree in Electrical / Electronic engineeringMinimum Years of Experience: 12 to 20 Years, preferably Gulf experienceIndustry: Substations , PT&DJob Description /
Experiencea) Experience in EHV Substation designs from 132 Kv up to 400 Kv and above.b) 8 to 10 years as in engineering Lead Role.c) Interdisciplinary Co-ordination Experience between civil, Mechanical, Substation automation systems, Telecommunication systems.d) Profound experience in Substation Primary engineering and Handson experience in Secondary Protection engineering.e) design Progress Control & Monitoring.f) Profound experience in design reviews of GIS, Power Transformers, Reactors, Capacitor Banks, MV switchgear, AC/DC systems. Surge Arrestors, Terminal compound.g) Experience in Earthing, Lightning, Lighting designs. Etc.h) Liaison with Client/Consultant and Excellent Communication Skillsi) Candidates with GCC experience will be preferred.2019-02-02 05:30:00 |
Apply Now |
design Manager
INR7"YEARLY"
Design ManagerFull Time (12-20 Yrs )Unisafe |
Doha
,
Qatar
Qatar
0doha
Qatar
,
Not Mentioned
qatar
0qatar
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
,
Not Mentioned
saudi arabia
0saudi arabia
Dubai
,
United Arab Emirates
United Arab Emirates
0dubai
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
31-01-2019 2019-05-01Applicant should have at least 12-15 yrs of relevant and rich experience in the field of detailed engineering, in Fire Protection engg. Main responsibilities include the followings:
- Attend and review the design input check list during Kick off meeting with estimation and collect all relevant inputs to proceed further for detailed engineering.
- proper utilization of resources, allocation of manpower by assessing the workload in consultation with project managers/Project Engineers/design engineers.
- Review & monitor the engineering progress on daily, weekly basis i.e. shop dwgs, calculations, BOM, all other technical submittals etc.
- Close coordination with Global design Centre (based in India) for allocating the detailed engg jobs as per the project schedule.
- Must have working experience on hydraulic calculations software like HASS, PIPENET, AutoSprink etc..
- Must have detailed knowledge of NFPA, UAE/Qatar/KSA rules for designing FF systems.
- Assistance to procurement& project departments for equipment selection and material submittals respectively.
- Guidance to design engineers on techno commercials issues & establishing a pattern for smooth Bidirectional flow of inputs VS outputs from GDC.
- Client, consultant/Civil defence meetings for shop drawings/detailed engg approvals
- Bill of materials
- Daily/Weekly meetings to focus on deadlines, removing barriers and creating responsibility and accountability for results.
- Should have project engineering experience on enhancing profit margins by value engineering and variations issues etc..
- Promote Best Practice Transfer by organizing best practice meets for sharing skills and learning.
- Provide leadership, mentoring and team bonding practices.
- Other duties and responsibilities, as necessary and when required, in order to achieve success of organization.
- MIS reports2019-01-31 05:30:00 |
Apply Now |
engineering Manager
INR7"YEARLY"
Engineering ManagerFull Time (1-10 Yrs )Propel Consult |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
30-01-2019 2019-04-30About the company:Our client has grown to become the worlds No. 1-ranked engineering design firm - delivering integrated, sustainable solutions that help clients and communities in every region of the world create and unlock new opportunities. They operate in 7 continents, have over 87,000 employees, and are in 150+ countries and turnover in excess of $17.4Billion per annum. We are looking for an engineering Manager to work in Riyadh.Responsibilities:Day to day operations of the department and responsible for overseeing engineering services delivery.Preparation of Department Operating Structure and roles and responsibility of the department staffPreparation of the engineering department processes and procedures in line with the NPMO methodology.Oversee the development of Standard design Criteria, Construction Specifications, and details to SAC field of workEnsure appropriate interdisciplinary design review including value engineering and constructabilityOversee the preparation of scope of work for engineering design RFPReviewing proposals for engineering design contractsAssist in setting up pre-qualifications criteria for the A/E companies. Salary:
SAR
60,000 to 68,000
per month inclusive of fixed allowances.
REQUIREMENTS:
REQUIREMENTS:Bachelors/ Masters Degree in engineering from accredited universityMinimum 25 years experience in a related field on national / international major initiatives and developments.Technical knowledge of engineering systems, methods, and procedures Proven leadership capability.Excellent verbal and written communication skills2019-01-30 05:30:00 |
Apply Now |
design & Active Equipment Coordinator
INR7"YEARLY"
Design & Active Equipment CoordinatorFull Time (1-10 Yrs )Atkins Middle East |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
29-01-2019 2019-04-29Faithful+Gould is looking to recruit an experienced design & Active Equipment Coordinator who can provide professional and proactive support to the Senior Programme Manager for Faithful+Goulds projects in KSA.**design & Active Equipment Coordinator (AS2/AS3 Coordinator) Responsibilitiesdesign (AS2 designer):Manage all aspects of the AS2 design process under the direction of the AS2/AS3 (design/Free Issue Equipment) ManagerConduct the day-to-day management of the IPND Stage 3 design Subcontractors across all 3 Regions, in taking the Site Survey Pack/Data as a basis for design, and monitoring/managing production of the Critical design Pack (CDRs)Attending CDR review meetings with all stakeholdersReviewing and approving Weekly Progress Reports & Daily Reports for each Site within the InControl System (Internal in-house system)Attending regular progress/interface meetings with the AS2 designer & stakeholdersCo-ordinate all IPND Stage 3 design works (Per Region) adhering to the master schedule and current approved Site ListAssist in achieving targets and reviewing any reforecasting of milestone targets submitted by AS2 designers.Attending designers offices to check on resource levels and progress of designsEnsure that the IPND mandatory procedures are strictly adhered to, in line with the Project Execution Plan (PEP)Provide support to Contracts Admin in the management of Daily Exception Reports (DERs delay claims), Daily Labour Reports (DLRs- daywork sheets) & Technical Queries (TQs)Provide updates to the AS2/AS3 Manager to help support our reporting requirements to the client.Visits to the Eastern, Western and Central regions may be required in fulfilling this role.Ensure all works are undertaken in line with our HSE policies and standards.Facilitate communication between the regions and the central design team to provide the required visibility across field work and back office design works.Help coordinate the interface between AS2 and AS1; including AS1 back to AS2 at site completion.Work collaboratively and proactively with all colleagues and programme stakeholders.Escalating risk and issues as the moment you become aware of them.** Free Issue Active Equipment (AS3 Supplier)Manage all aspects of the AS3 Supplier process under the direction of the AS2/AS3 (design/Free Issue Equipment) ManagerConduct the day-to-day management of the IPND Stage 3 Free Issue Active Equipment across all 3 Regions, and monitoring/managing progress of the configuration of the Active EquipmentLiaising with the AS3 Supplier to ensure the AS3 Supplier has all the necessary information required to configure the Active EquipmentCoordinating with AS1 Installation Subcontractors & AS2 designers to ensure they have passed all necessary information to AS3 Supplier to allow AS3 Supplier to configure the active equipmentReviewing and approving Weekly Progress Reports for each Site within the InControl System (Internal in-house system)Attending regular progress/interface meetings with the AS3 Supplier & stakeholdersCoordinate all IPND Stage 3 active equipment (Per Region) adhering to the master schedule and current approved Site ListAttending Suppliers Warehouse and undertaking routine checks on stock levels & progress.
REQUIREMENTS:
**REQUIREMENTSBachelors degree in engineeringMinimum 7 years experience in design Management, Coordination and Supplier Management on large projectsExcellent communication skills in Arabic and EnglishHands-on experience in creating and managing reports and dashboards2019-01-29 05:30:00 |
Apply Now |
design Coordination
INR7"YEARLY"
Design CoordinationFull Time (2-5 Yrs )AL Futtaim Carillion |
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
,
Not Mentioned
saudi arabia
0saudi arabia
Dubai
,
United Arab Emirates
United Arab Emirates
0dubai
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
28-01-2019 2019-04-28KEY OBJECTIVES OF THE JOB
design Co-ordination
- Collate information from related Arch / Struct / MEP consultants drawings / RFI responses / SI / amendments advised by Sub Contractors and incorporate them into our workshop drawings
- Check Drawing Development / Presentation / Accuracy of drawings
- Ensure Compliance with the latest specifications and Drawing Standards
Efficiency
- Plan and Organize workload to meet Project Priorities
- Demonstrate Ability to work unsupervised but also highlight issues to Senior design staff
- Resolve issues and coordination of information to meet required timescales and Site activities
Communication Skills
- Demonstrate good Written and Oral skills
- Interact with Senior / Junior staff / Client / Site Team to provide appropriate feedback (Meetings, Advance info etc)
- Show Ability to manage workload with sub ordinate staff
Technical Knowledge
- Demonstrate Ability to visualize in 3D and cut sections to understand the concept
- Understand the requirements and ability to read Consultants / Sub contractors drawings
- Raise RFIs / Highlighting areas left uncoordinated by the Consultants / Sub contractors.
- Understand different disciplines within the construction team and reflect this in the way coordination problems are resolved.
- Develop an understanding of electronic document management system.
- Understand the requirements of a collaboration system and how it will benefit the design department.
MAIN ACCOUNTABILITIES
OPERATIONAL ACCOUNTABILITIES
- Accountable for the completion of tasks, within the scope of the function
- Delivers activities to support operational objectives for their role
- Inputs to planning activities with horizons of typically up to 3 months
- Makes decisions within parameters set by manager, using job/specialist experience
- Interacts with client or users around specific work efforts and deliverables
- Supports delivery of Health and Safety policy and standards
- Supervises the activities of others to meet deadlines and quality standards taking account of impact outside area of responsibility
-Focus of work on the completion of a set of related tasks for a particular section or service with the ability to accommodate new tasks
KNOWLEDGE AND APPLIED SKILLS
- Diploma/Degree qualified
- Minimum 1-2 years overseas related experience in a similar role
- Good communication skills
- Ability to raise queries/RFIs on a regular basis
- Ability to work effectively with design Management teams
BEHAVIOURIAL COMPETENCIES
People Success Factors:
- Planning & Organising
- Achieving and Doing
- Building Relationships
- Delivery through People
- Business Awareness
- Customer Focus
- Contributing to Continuous Improvement
- Dealing with Change2019-01-28 05:30:00 |
Apply Now |
Lead Architect - design Studio
INR7"YEARLY"
Lead Architect - Design StudioFull Time (1-10 Yrs )Stratus Recruitment International |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
28-01-2019 2019-04-28Our Client is a leading international Project Management company in Riyadh with a diverse portfolio of mixed-use projects/programs currently getting underway.The vacancy would suit an architect who has residency in KSA with a transferable Iqama.This will be a senior role within the companys design studio - a multi-discipline design office engaged in architectural and engineering design of major building projects, including residential, commercial, corporate, recreational, educational, healthcare and mixed-use developments, from initial concept and preliminary design to final design and tender documentation level.Reporting to the senior management, responsibilities will include:General management of the Architectural Department in relation to resources, staff assignments, technical standards, etc.Directing the activities of architectural design teams within the department to ensure the proper interpretation of project briefs and client requirements, development of designs and preparation of construction documentation.Ensuring that architectural design work is properly coordinated with the requirements of other design disciplines.Presenting architectural designs to appropriate regulatory authorities for approval.Ensuing the completeness and quality of the output of architectural design teams.Ensuring that work is prepared and completed in accordance with established project design schedules and budgets.Providing input to technical and financial proposals for prospective projects.
REQUIREMENTS:
Candidates must have the following:Western university degree educated architect20 Years design experience of architectural design with International ConsultanciesRResidency in Saudi with a transferable Iqama2019-01-28 05:30:00 |
Apply Now |
Senior Electrical Engineer - design & Supervision
INR7"YEARLY"
Senior Electrical Engineer - Design & SupervisionFull Time (1-10 Yrs )CG Resourcing |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
12-02-2019 2019-05-13Required to join a international consultancy working on the construction of a mixed use development in Riyadh. The successful candidate will be responsible for electrical design and supervision of this project on behalf of the client. This will include design, design review, construction supervision, client liaison and report writing
REQUIREMENTS:
Applicants should meet the following criteria-A degree in Electrical engineering-A design background working within large international consultancies-Experience of site based supervision-15 years post graduate experience-design review expertise-Up to date with latest software-Ideally will have had experience working on middle east projects-Fluent in English2019-02-12 21:30:42 |
Apply Now |
Senior Mechanical Engineer - design & Supervision
INR7"YEARLY"
Senior Mechanical Engineer - Design & SupervisionFull Time (1-10 Yrs )CG Resourcing |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
12-02-2019 2019-05-13Required to join a international consultancy working on the construction of a mixed use development in Riyadh. The successful candidate will be responsible for mechanical/HVAC design and supervision of this project on behalf of the client. This will include design, design review, construction supervision, client liaison and report writing
REQUIREMENTS:
Applicants should meet the following criteriaA degree in Mechanical engineeringA mechanical design background working within large international consultanciesExperience of site based supervision15 years post graduate experiencedesign review expertiseUp to date with latest softwareIdeally will have had experience working on middle east projectsFluent in English2019-02-12 21:30:42 |
Apply Now |
Lead - design Studio
INR7"YEARLY"
Lead - Design StudioFull Time (1-10 Yrs )Atkins Middle East |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
12-02-2019 2019-05-13Job ScopeOur Middle East offices include the UAE (Dubai & Abu Dhabi), Oman, Qatar, Bahrain, Saudi Arabia & Kuwait. As a provider of multi-disciplinary technical services to the built environment Atkins in the Middle East is committed to design excellence in the delivery of first class solutions which combine innovation, imagination and best practice.ResponsibilitiesAdvising the design Team on technical matters in core discipline.Managing quality and technical complianceMonitoring work executedInterface with other disciplines, MOD consultants and contractors.SNC Lavalins Atkins business is one of the largest multidisciplinary, multi sector engineering design consultancies in the world and is part of the SNC Lavalin Group.As one of the worlds most respected design, engineering and project management consultancies with a leading track record in the defence sector, Atkins are ideally placed to respond to this market. We have a broad establishment and proud, 50 year history throughout the Middle East region.We provide a full range of design, engineering and project management services for buildings, transportation and other infrastructure programmes.Atkins in the Middle East now employs around 2,000 staff serving Gulf clients across all market sectors from offices in Abu Dhabi, Al Ain, Doha, Dubai, Jeddah, Kuwait City, Manama, Muscat, Riyadh, and Sharjah.
REQUIREMENTS:
REQUIREMENTSDegree qualified in a core design disciplineChartered Engineer (or equivalent)Member of a recognized professional institutionMinimum of 15 years of post graduate professional experience of which 5 will have been in a similar senior positionAt least 5 years experience on multi-disciplinary multi discipline design projectsWork experience either within the Middle East or on the design of Middle East projectsDetailed knowledge of applicable international design standardsExperience of technical design softwareSound managerial and Technical skill setExcellent communication skills in written and spoken EnglishAbility to liaise with a wide variety of staff and Clients at all levels essentialBe able to show Leadership skillsHave excellent team building skillsCommercial awarenessWorking knowledge of Health & Safety best practices in the Middle EastAdministrative skillsDelegation skillsNegotiation and presentation skillsAbility to Influence at all levelsExperience of Saudi Arabia building design standards would be advantageousExperience of due diligence for building projects desirableExperience of undertaking technical reviews.BehavioursExcellent team playerDecisive, clear and consistent in approach to Structural engineering designSound communicatorExcellent technical judgementAdaptableWillingness to participate in all aspects of Structural engineering workload deliveryUnderstand the importance of technical accuracy with a high attention to detailRewards & BenefitsWe offer an excellent package which includesA competitive salaryAccommodation allowanceTransportation allowance22 calendar days annual leave (based on 5 day working week)Medical and life insurance coverCompany gratuity schemeDiscretionary bonus schemeAnnual flight allowance to point of originEmployee Assistance program2019-02-12 21:30:40 |
Apply Now |
design Manager Saudi National
INR7"YEARLY"
Design Manager Saudi NationalFull Time (1-10 Yrs )Stratus Recruitment International |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
12-02-2019 2019-05-13My Client is an international Project Management Consultancy who have recently been awarded a mixed-use mega-project in Riyadh which will comprise residential, commercial, retail and leisure facilities.They have an urgent vacancy for an Architectural design Manager who specialises in Leisure and/or hospitality projects, and can demonstrate success on the largest architectural projects both in a design Office and Project Management environment.This is one of a number of the companys live senior vacancies that would be ideally suited to an experienced Saudi national.
REQUIREMENTS:
Degree in Architecture from a recognised university.Preferably a Saudi national. Expatriates with a current transferable Iqama may also apply10+ Years of experience in ArchitectureExperience in Leisure and/or hospitality projectsFluent in English.Strong communicator.Excellent leader.Creative and innovative designer.2019-02-12 21:30:38 |
Apply Now |
Senior Interior designer (design Office)
INR7"YEARLY"
Senior Interior Designer (Design Office)Full Time (1-10 Yrs )Propel Consult |
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
12-02-2019 2019-05-13Our Client is looking for a Senior Interior designer to work in Riyadh, KSA. Our client is a leading Interior design and Build company specialized in high end residence and palace projects.The Senior Interior designer will be leading and liaising design team in Riyadh and will help develop design solutions, oversee all aspects of design through conception to completion. This role will be hands-on which includes the designing, mentoring, training and supervising senior and junior designers.
REQUIREMENTS:
REQUIREMENTS-Bachelors/Masters Degree in Interior design or Architecture-Minimum 10 to 15 years of experience in design-Ability to work in a team environment with good collaboration skills-Excellent presentation abilities-Passionate about design and able to be the design inspiration for multiple highly-creative project teams-Western expats due to visa availability2019-02-12 21:30:38 |
Apply Now |