Truck Tyre Technician
INR7"YEARLY"
Truck Tyre TechnicianFull Time (3-6 Yrs )AL ROSTAMANI TRADING COMPANY LLC |
Abu Dhabi
,
United Arab Emirates
United Arab Emirates
0abu dhabi
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
24-12-2019 2020-03-23JOB RESPONSIBILITIES:FUNCTIONAL:
•Identifies the customers' requests, analyses them with his Supervisor/foreman, and refines the diagnostic process.
•Performs the requested work, in observance of the manufacturer's methods (recommendations and operating procedures) to ensure efficient use of time.
•Communicates with the foreman during the work to inform him of the check results and of his work, and also to ask for his help or assistance and assists Technicians as needed.
•Masters the various repair techniques and uses the documentation as necessary, sharing his knowledge with Technicians.
•Observes the safety rules defined for the equipment, instruments and products.
•Observes the work time set by the foreman.
•Carries out, on his own initiative, minor work not requested by the customer.OPERATIONAL:
Places protective equipment on the vehicle (if not already done).
•Prepares, under the foreman's responsibility, the supplies outward sheet for parts to be replaced and transfers them from the Spare Parts to service as required.
•Prepares the tools, equipment required to complete each task and ensures all components at the periphery of the work location are in operational condition.
•Performs safety inspections and completes the quality control sheets and necessary test documents.
•Undertakes the requested work in accordance with the work order.
•Identifies additional work, non-conformance and rapidly communicates them to the foreman and documents the incidences on the work order.
Informs the foreman of any incident which might cause a delivery delay.
•Perform selective sorting of waste, within the frame of the applicable rules.
•Performs diagnostic tests using appropriate equipment.
•Prepares the vehicle for delivery by ensuring all equipment and accessories are in place and the vehicle has been cleaned, returning any damaged or old parts to the customer if requested.PROCEDURAL:
•Observes the work schedules and times set by the Job Controller / foreman.
•Applies the manufacturer's directives and the safety rules.
•Searches for information in the available documentation (technical manuals, repair booklets, supplier’s data).
•Observes the labor analysis procedures and supplies and parts issuing procedures.JOB REQUIREMENTS:
?High School Certificate/ Diploma (12 years of schooling education), • Preferably 3 years Diploma (OR) 2 year I.T.I in Automobile
?Preferably 3 years Diploma (OR) 2 year I.T.I in Automobile Knowledge of Product, 5W2H probing skills, Smart selling, Telephone handling skills & Customer handling skills
?Valid UAE drivers’ licence would be an added advantage.2019-12-24 00:13:52 |
Apply Now |
Transport & Logistics Supervisor
INR7"YEARLY"
Transport & Logistics SupervisorFull Time (4-8 Yrs )ARENA EVENTS LIMITED (DUBAI BRANCH) |
Abu Dhabi
,
United Arab Emirates
United Arab Emirates
0abu dhabi
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
24-12-2019 2020-03-23Plan and supervise the transport from workshop to project site
Schedule daily routes to deliver the material/multi-drop deliveries.
Track orders, deliveries schedules and log in report for drivers.
Coordinate with supervisors/foreman to ensure proper storage and distribution of products
Monitor and report on transportation costs
Ensure efficient filing system pertaining to various deliveries and shipments.
Coordinate the maintenance and repair for commercial vehicles and equipment
Research and suggest cost-effective shipping methods
Organize training sessions for drivers along with HSE officer (e.g. proper use of machines and handling of hazardous material)
Ensure compliance with company policies and shipping legislation
Assist Operations Manager with day to day administrative tasks
Coordinating and establish high standards in housekeeping
Assisting during build up and dismantling on site if require
Directing all transportation activities and developing transportation relationships.
Maintaining records and scheduling the registration renewals for the company owned vehicles.2019-12-24 00:13:50 |
Apply Now |
Electrical foreman
INR7"YEARLY"
Electrical ForemanFull Time (5-10 Yrs )AL ROSTAMANI GROUP LLC |
Dubai
,
United Arab Emirates
United Arab Emirates
0dubai
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
24-12-2019 2020-03-23Job Responsibilities:
Responsible to monitor and guide Charge hands and Sr. Technicians to achieve targeted activities in time with quality.Supervise Charge hands and Sr. Technicians for Erection, Installation, Maintenance of Substation Electrical Equipment, Wiring, Glanding, Terminations etc.Supervise Charge hands and labors for all Civil activities such as trench excavation, back filling, trough placement, etc...Comply and implement the Safety policiesFollow all HSE instructions, setting an example to othersStop any unsafe work/act and report to the HSE departmentReport immediately to the HSE if any Safety/Environmental concern is noticed in and around your working areaJob Requirements:
Diploma in Electrical and Electronic EngineeringMinimum 5 years experience in HV cablesExperience in GCC Countries on similar jobs2019-12-24 00:13:20 |
Apply Now |
Auto Mechanic
INR7"YEARLY"
Auto MechanicFull Time (3-8 Yrs )AL ROSTAMANI TRADING COMPANY LLC |
Abu Dhabi
,
United Arab Emirates
United Arab Emirates
0abu dhabi
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
24-12-2019 2020-03-23Functional
•Identifies the customers' requests, analyses them with his Supervisor/foreman, and refines the diagnostic process.
•Performs the requested work, in observance of the manufacturer's methods (recommendations and operating procedures) to ensure efficient use of time.
•Communicates with the foreman during the work to inform him of the check results and of his work, and also to ask for his help or assistance and assists Technicians as needed.
•Masters the various repair techniques and uses the documentation as necessary, sharing his knowledge with Technicians.
•Observes the safety rules defined for the equipment, instruments and products.
•Observes the work time set by the foreman.
•Carries out, on his own initiative, minor work not requested by the customer.
Operational
Places protective equipment on the vehicle (if not already done).
•Prepares, under the foreman's responsibility, the supplies outward sheet for parts to be replaced and transfers them from the Spare Parts to service as required.
•Prepares the tools, equipment required to complete each task and ensures all components at the periphery of the work location are in operational condition.
•Performs safety inspections and completes the quality control sheets and necessary test documents.
•Undertakes the requested work in accordance with the work order.
•Identifies additional work, non-conformance and rapidly communicates them to the foreman and documents the incidences on the work order.
•Informs the foreman of any incident which might cause a delivery delay.
•Perform selective sorting of waste, within the frame of the applicable rules.
•Performs diagnostic tests using appropriate equipment.
•Prepares the vehicle for delivery by ensuring all equipment and accessories are in place and the vehicle has been cleaned, returning any damaged or old parts to the customer if requested.Procedural
•Observes the work schedules and times set by the Job Controller / foreman.
•Applies the manufacturer's directives and the safety rules.
•Searches for information in the available documentation (technical manuals, repair booklets, supplier’s data).
•Observes the labor analysis procedures and supplies and parts issuing procedures.JOB REQUIREMENTS:
?High School Certificate/ Diploma (12 years of schooling education), • Preferably 3 years Diploma (OR) 2 year I.T.I in Automobile?The position holder must be less than 45 years old.
?Strong background in the automotive mechanical field
?Having thorough knowledge of automotive service and repair works
?Valid UAE drivers’ licence would be an added advantage.2019-12-24 00:13:15 |
Apply Now |
Looking for foreman/Technician/Electrician/ Oil & Gas Co. in Qatar
INR7"YEARLY"
Looking for Foreman/Technician/Electrician/ Oil & Gas Co. in QatarFull Time (8-15 Yrs )snc lavalin |
Doha
,
Qatar
Qatar
0doha
Qatar
Not Mentioned
qatar
0qatar
|
14-01-2020 2020-04-13Hi, We are looking for below positions (Oil & Gas Co.) in QatarPiping foreman
Mechanical foreman
E&I foreman
Civil/Structural foremanMechanical Technician
Electrical Technician
Instrument Technician
Electrical/Telecom TechnicianElectrician
Instrument Electrician / Fitter
Electrician / Telecom Electrician
Kindly share your updated CV and fill in below details if you are interested in the above mentioned job role.
1. Total Experience:
2. Nationality:
3. Current Location:
4. Current or Last Drawn Salary
5. Expected Salary:
6. PP Number & Validity:
7. Notice Period or Minimum Availability to join us:
8. Reason for Job Change
9. Are any of your family member/relative/close friend
working with Snc Lavalin or its subsidiaries?2020-01-14 18:00:27 |
Apply Now |
Motor foreman - Electrical
INR7"YEARLY"
Motor Foreman - ElectricalFull Time (4-9 Yrs )Live Connections Consulting - FZE |
Doha
,
Qatar
Qatar
0doha
Qatar
Not Mentioned
qatar
0qatar
|
10-01-2020 2020-04-09Submersible Motor foreman, Hands-on Repair Experience & Site Services, General Electrical Service.
English must be good ,Report to workshop Supervisor for Priority of jobs
Assigned to work on motor stator, to strip, clean, re-wind and varnish the stator
Testing of Motor including Resistance Test, Hi-Pot Test Insulation resistance test & performance test
Develop & implement procedures along with OEM input
Keep Workshop up to 5S standards
Write Report on Strip & Inspection, Dismantle motor to perform electrical test and records data
Re-assemble motor and perform various tests including
Motor rewinding
Lead & Train Senior & Junior Technicians
Assigned to work on site to perform installation and commissioning of electric submersible pump & centrifugal pumps2020-01-10 15:59:14 |
Apply Now |
Piping Manager
INR7"YEARLY"
Piping ManagerFull Time (10-16 Yrs )Nakilat Keppel (NKOM) |
Doha
,
Qatar
Qatar
0doha
Qatar
Not Mentioned
qatar
0qatar
|
10-01-2020 2020-04-09Job Summary and PurposeManages the delivery of Piping fabrication (workshops) & installation (vessel/project) strategy & services in productivity, cost, safety and quality for defined repair, conversion, offshore, onshore and new building jobs. Piping is a core business process, and a department of significant size, the Piping Manager is accountable to manage a large team to deliver all piping processes including planning, execution, technical resolution and business improvement.AccountabilitiesKey Accountabilities:Oversee execution of daily operations, making sure production cycles are met from part design to fabrication. Manage handling of raw material and equipment logistics, people resources and administrative processes.
Manage execution of work scope, including workflow such as approval of Sub Contractor Request “SCR”, Material Take Off 'MTO', Work Completion Form “WCFs, foreman chits and Permit to Work 'PTWs'.Monitor and report on the availability, utilization and maintenance of equipment and tools, including the calibration of inspection, measuring and test equipment.
Develop systems and procedures that track and monitor productivity metrics and performance targets to ensure the optimization of returns for the company.Ensure that all activities are captured for billing purposes and report to management for value chain throughput. Authorize purchase of equipment, spares and materials as required.
Conduct briefing to the section and ensure execution in compliance with all safety and quality aspects of Integrity Management System “IMS”, work instructions and procedures.
Specify and comply with work standards and resolve all quality issues on a timely manner.Plan and allocate the section manpower & monitor the cost and man-hours of each job against the plan
As the head of the Piping Workshop, Co-ordinates closely with Project managers to ensure fabrication adherence to specifications and timely delivery of installation and repair services.Cultivate a culture of “Zero Harm’ where it is a safe to speak up and stop unsafe work.Work closely with QSA to implement quality assurance and control practices to both prevent and detect defects.
Consult with the Commercial and Marketing department and Project Manager to review and understand the tender contract, to make an evaluation of the technical quality assurance & control support. Consult and inform the QSA Manager on the likely accountabilities, responsibilities and resources required for each project.Review daily operational performance data & apply subject matter expertise to establish and synthesize information in order to provide and present insight for decision making in daily operational meetings. Isolate and provide feedback on the causes & potential solutions such as resource prioritization, technical fixes etc.Establish a data repository to capture and store key production process throughput data and internal benchmarks and KPI’s, for the purpose of business decision relate to continual improvement and productivity efficiency.
Facilitate a Balanced Score Card approach in the department which cultivates continual improvement in financial performance, process improvement, customer satisfaction (internal and external) and people engagement.
Complete other duties as directed from time to time
Key Result Areas
Productivity - Set & drive KPISafety - foster zero harm cultureQuality - implement zero re-work principlesCost - reduced rework and enable timely deliveryInteractions and Working Relationships
Internal:Piping SectionAll Sections in NKOM
Purpose:To Educate piping Team towards Safety, Health, Environment, Quality &Security implement SHEQS Requirements with in Piping Team To Educate Piping Section about IMS To Ensure the completion of Assigned works to Piping External:ClientsSub-ContractorsService EngineersPurpose:To Plan / Allocate the Piping Section Man Power Highlight the client/Sub contractor/ Service Engineer Requirements to Section Engineers
Financial AuthoritiesAs per TOFA.
Qualifications, Experience and Skills
Qualifications:A Diploma or a Degree in Marine Engineering, Mechanical Engineering, Certificate of Competency (Marine Engineer Officer) Class 3 to 1 (Motor ship), or its equivalent.
Experience:Total 10 years of relevant working experience in the Marine (ship repair/conversion/new building/offshore/onshore) industry, with at least 5 years of managerial experience.2020-01-10 15:59:12 |
Apply Now |
Urgent Opening for Fabricator for Oman
INR7"YEARLY"
Urgent Opening for Fabricator for OmanFull Time (2-8 Yrs )MB INFORMATICS PRIVATE LIMITED |
Muscat
Oman
Oman
0muscat
|
09-01-2020 2020-04-08• Implement & Maintain Organizations Quality management system requirements in the projects.
• Position, align, fit, and tack weld parts to form complete units or sub units by following drawings and layout specifications and verify dimensions of work-pieces by using squares, angles, rulers, measuring tapes, water level, vernier caliper and available measuring devices to ensure that specifications are met.
• Align and fit parts according to drawing/specifications/instruction by using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers to position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding/riveting.
• Set up and operate fabricating machines such as brakes, rolls, shears, flame cutters, grinders, drill machine to bend, cut, form, punch, drill to assemble metal components.
• Design and construct templates and fixtures, using hand tools.
• Study engineering drawings, layout specification, work order/work instruction by foreman/supervisor determine materials requirements and task sequences.2020-01-09 17:16:41 |
Apply Now |
Fabricator Welder
INR7"YEARLY"
Fabricator WelderFull Time (5-10 Yrs )Port of Salalah |
Oman
Not Mentioned
oman
0oman
|
09-01-2020 2020-04-08We are looking for Fabricator Welder Job Description:Essential Duties and Responsibilities1. Selects appropriate equipment and materials, and plans layout, assembly and welding.2. Lays out, positions, aligns and fits components together.
3. Bolts, clamps, and tack-welds parts to secure in position for welding.4. Sets up equipment and welds parts, using arc, gas-shielded arc, or gas welding equipment.5.Assembles part by bolting and riveting.6. Repairs parts by dismantling, straightening, reshaping and reassembling.7. Maintains a neat, tidy and safe work station.8. Follows all health and safety rules and regulations for work area.9. Informs foreman of any workmanship issues, requests checking of work when appropriate, and seeks approval of completed work product as required.10. Performs any other related activities, as requested.2020-01-09 17:16:38 |
Apply Now |
Technician - Electrical
INR7"YEARLY"
Technician - ElectricalFull Time (2-8 Yrs )Port of Salalah |
Oman
Not Mentioned
oman
0oman
|
09-01-2020 2020-04-08We are looking for TECHNICIAN - Electrical for Oman.
Purpose: Maintains and repairs cranes, RTGs, spreaders and rolling equipment of less complexity and difficulty in the engineering shift. Performs preventative maintenance various equipment as scheduled.
Essential Duties and Responsibilities1.Checks and be able to interpret analog and digital electronics, electrical and electro-hydraulic drawings in the repairs manuals.2.Carry out independently the safely the electrical Preventive Maintenance Services (PMS) and repairs of the following equipment:a. DC electrical motors such as replacing carbon brushes, filters etc.
b. AC/DC inventor drives such General Electric (GE), Siemens and FUJI Brands.
c. PLC control system of GE, Siemens, and FUJI Brands.
d. Bromma system of RTGs
e. Electrical system of QCs
f. High Voltage switchgear and transformers.
g. Motor generator sets.
h. Instrumentation system.
i. Electrical system of Mobile Cranes.
j. Electrical systems of rolling equipment. 3.Diagnoses and repair promptly the QC, Mobile Cranes, RTGs, spreader and rolling equipment faults during heavy operation.
4.Operates the industrial computer to trace the electrical faults and troubleshooting within time limits.5.Checks and test faults by using and operating analog and digital electrical testers such as Megger, Voltmeter/ Resistance tester, etc.6.Ensure proper understanding in Programmable Logic Control system and AC/DC.7.Checks all electrical and electronic components such as Diodes, Resisters, Proximity switches , Thyristors, Transistors, Capacitors, solenoid coils, Printed circuit boards, Limit Switches, Fuses, Motors, Meters, etc.8.Needs fully understanding how to operate QCs, s, MHC Cranes and Mobile Cranes, RTGs, spreaders and rolling equipment.9.Ensures that the maintenance, breakdown services and or remedial works (electrical) of container handling cranes, RTGs, spreaders and rolling equipment are maintained a.Carries out maintenance and repair service for container handling gantry cranes, rubber tyred gantry cranes, spreaders and rolling equipment.
b.Ensures that emergency work is followed up by reporting to the senior technician - electrical and/or foreman electrical.
c.Carries out electrical/electronic maintenance repairs, fault findings and monitoring.
d.Submits routine and critical inspection and monitoring reports.
e.Ensures work conforms to safety rules and regulation.
f.Ensure tidiness and cleanliness of workshop facilities and all equipment.
g.Carry out those duties assigned by the senior technician - electrical and/or foreman electrical.10 Provides complete and accurate written reports on equipment, as needed.11.Performs minor electrical repairs and assists the Sr. technician - electrical in such activities as assembling, dismantling and overhaul of equipment electrical components such as motors, alternators etc.12.Performs scheduled preventive maintenance activities.13.Records spare parts that are used, and other data, as required, for record keeping.14 Reconditions usable parts to control maintenance costs.15.Follows instructions regarding assignments.16.Follows the safety and health rules and regulations for the work area.17.Maintains a tidy, neat and clean work area.18.Provides complete and accurate reports to foreman, as needed
.
19.Performs any other related activities, as requested.2020-01-09 17:16:38 |
Apply Now |
Engineer (Instrument & Control)
INR7"YEARLY"
Engineer (Instrument & Control)Full Time (10-15 Yrs )Bilfinger Kuwait |
Al Ahmadi
,
Kuwait
Kuwait
0al ahmadi
Kuwait
Not Mentioned
kuwait
0kuwait
|
09-01-2020 2020-04-08• responsible for designing, developing, installing, managing and maintaining equipment which is used to monitor and control engineering systems, machinery and processes.
• Control and instrumentation (C&I) engineers are responsible for designing, developing, installing, managing and maintaining equipment which is used to monitor and control engineering systems, machinery and processes.• To plan and schedule the work and efficiently organize the site / facilities in order to meet an agreed programme of deadlines.• To attend regular meetings with clients, architects, consultants, and keeping them informed of progress.• To supervise and monitor the site labour force through General foreman and or Supervisors, monitoring the work of any subcontractors to complete the work as per customer's satisfaction.
• To oversee quality control and safety matters on the site, and ensure that regulations are adhered to.• To resolve any unexpected technical difficulties and other problems that may arise at any time.• To oversee the selection and requisition of materials for use in the construction / maintenance, to check whether the materials are as specified.• To supervise and ensure proper maintenance of materials and to advise on technology and modifications required for a simpler and cost saving mechanism.
• To prepare necessary paperwork for the completion of work and get it authorised by the client after their inspection.2020-01-09 17:16:35 |
Apply Now |
PROCESS MECHANIC
INR7"YEARLY"
PROCESS MECHANICFull Time (3-8 Yrs )KIMMCO-ISOVER |
Mina Abdallah
,
Not Mentioned
mina abdallah
0mina abdallah
Kuwait
Not Mentioned
kuwait
0kuwait
|
09-01-2020 2020-04-08Job Purpose:
• The Process Mechanics reports directly to the Mechanical supervisor or foreman and shall be responsible in performing the corrective, planned, preventive & predictive maintenance of all process equipment.
• Analyzing equipment operating problems, make recommendations, and perform the necessary repair.
• To monitor the performance of all equipments to achieve maximum utilization by minimizing breakdowns and to ensure compliance to KIMMCO’s ISO 9001-2000 quality assurance system requirements.
• Should also perform jobs on expansion and modification.Key Accountabilities:
• Conducts daily routine check of all running equipments and monitor the performance and perform corrective actions in order to prevent breakdowns and to achieve KIMMCO’s ISO 9001-2000 quality assurance system requirements.
• Attends to malfunctioning equipment or breakdown, trouble shooting and repairs by welding and fabrication, or using lifting equipment to bring back the machine in normal operation condition.
• Perform preventive and planned maintenance as per the department’s maintenance schedule.
• To attend and perform Equipment breakdown or Emergency work at any time if needed, even at night & report duty when instructed
• Records daily on log book with 100% accuracy all observations, breakdowns and
action taken, work completed or in progress.
• Work as process shift mechanic or change on routine working schedule if needed with instructions from department superiors.
• Ensure a safe working surroundings by following all necessary safety guidelines, safe keeping of tools & daily cleanliness of work areas.
• Conduct regular checks on fire fighting equipments to ensure they are operational.EHS Responsibility:
• Ensures compliance with Integrated Management System (IMS), in line with OHSAS 18001, ISO 14001 and ISO 9001, with emphasis on compliance and continuous improvements.
Authority:
• To halt performing the activity and inform his superiors, in case of any issues related to quality, environment & safety
Accountability:
• Accountability for above orientation responsibility2020-01-09 17:16:35 |
Apply Now |
PROCESS ELECTRICIAN
INR7"YEARLY"
PROCESS ELECTRICIANFull Time (5-10 Yrs )KIMMCO-ISOVER |
Mina Abdallah
,
Not Mentioned
mina abdallah
0mina abdallah
Kuwait
Not Mentioned
kuwait
0kuwait
|
09-01-2020 2020-04-08Job Purpose:
To perform corrective, planned preventive and predictive maintenance of KIMMCO plant Equipments. Attend / to correct trouble shooting and/or repair the malfunctioning or breakdown of equipments utilized in the manufacturing process area and to perform new projects electrical jobs in order to ensure to achieve KIMMCO’s ISO9001-2000 Quality
Assurance System requirements.
Key Accountabilities:
1. Perform expansion projects electrical works & modification works according to the schedules and plans.
2. Report log book with 100% accuracy for all observations, breakdowns and action taken with full details, work achieved or in progress and suggestions to improve the efficiency of the equipments.
3. Attend malfunctioning or breakdown of instruments in the plant area.
4. Attend equipment malfunctioning or breakdown to ensure
- Tel lines, RPL ACC lines, RPL Gamma line, RPL Forming, RPL Old machines, Binder, Batch, Electrical Furnace, Forehearth and Utility at targeted time efficiency in order to achieve KIMMCO’s ISO 9001-2000 Quality Assurance System requirements
5. Perform planned & preventive maintenance as per Elec. Engr’s schedule implemented by Electrical foreman or Relief foreman without delay & 100% without repeat job.
6. Perform the routine checking of all running equipment in the factory according to the Electrical Maintenance procedure list in 2 ½ hours per shift, if needed.
7. Perform cleaning of DC motor filters in Tel line#1, RPL ACC Line & AC motor air intakes in Tellines, Formings, RPL Old & ACC machines as per the list of motors, if needed
8. Perform cleaning, Repairing and overhauling works of AC & DC motors of all departments
9. Perform updating & familiarizing drawings according to the modification made.
10. Ensure proper tool using & safekeeping, cleanliness of work areas & equipments.
11. Ensure all the time safe working with all necessary safety guidelines.
12. Perform repairing & maintenance works of plant & office area lightings.EHS Responsibility:
• Ensures compliance with Integrated Management System (IMS), in line with OHSAS 18001, ISO 14001 and ISO 9001, with emphasis on compliance and continuous improvements.
Authority:
• To halt performing the activity and inform his superiors, in case of any issues related to quality, environment & safety
Accountability:
• Accountability for above orientation responsibility2020-01-09 17:16:35 |
Apply Now |
Mechanical foreman / Piping foreman
INR7"YEARLY"
Mechanical Foreman / Piping ForemanFull Time (5-10 Yrs )Al-Shahad Regional General Trading and Contracting |
Al Ahmadi
,
Kuwait
Kuwait
0al ahmadi
Kuwait
Not Mentioned
kuwait
0kuwait
|
09-01-2020 2020-04-08Oil & Gas - Refinery, Petrochemical, Power Utility, Industrial Utility2020-01-09 17:16:34 |
Apply Now |
Structural Engineer
INR7"YEARLY"
Structural EngineerFull Time (8-12 Yrs )Bahrain Mechanical Construction Company (BAMCO) |
Manama
,
Bahrain
Bahrain
0manama
Bahrain
Not Mentioned
bahrain
0bahrain
|
08-01-2020 2020-04-07These are the duties and responsibilities, not limited to, that we expect from a mechanical engineer candidate.
Drawing studying and BOQ preparation
Fabrication and erection drawings preparation
Material procurement and preparation of cutting layouts
Fabrication supervision
Installation supervision at site
Labour allocation and time sheet record-keeping
Client review meeting attending
Attending to site visits inquiries and sketch / BOQ preparation
Preliminary negotiation with vendors
Record keeping of materials in store and at site
Daily work update to senior management
Construction programme preparation
Method statement preparation
Maintain a good rapport with foreman, workers, sub-contractors and external contractors
Prepare inspection reports of various kinds
HSE certification preferred.2020-01-08 18:29:49 |
Apply Now |
Plumbing foreman
INR7"YEARLY"
Plumbing ForemanFull Time (3-5 Yrs )AL TASMEEM AL LAMEAH LLC |
Abu Dhabi
,
United Arab Emirates
United Arab Emirates
0abu dhabi
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
06-01-2020 2020-04-05Our company at Ajman looking for forman has UAE valid liecen
and visa2020-01-06 18:21:52 |
Apply Now |
Painting foreman-Joinery
INR7"YEARLY"
Painting Foreman-JoineryFull Time (3-8 Yrs )United Alsaqer Group LLC |
Abu Dhabi
,
United Arab Emirates
United Arab Emirates
0abu dhabi
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
06-01-2020 2020-04-05The Painting foreman in responsible for the Painting Section of the factory, including but not limited to its processes, procedure, painting workers, etc.2020-01-06 18:21:46 |
Apply Now |
Fit Out foreman
INR7"YEARLY"
Fit Out ForemanFull Time (3-6 Yrs )Super Asia Manpower Services |
Qatar
Not Mentioned
qatar
0qatar
|
06-01-2020 2020-04-05Job Location : QatarGood Salary will be Offered. Requirement : Candidates must have 2 years experience in Interior Fit out Works. Capable of supervising the works assigned and arranging materials/ labour accordingly for the site and report to Product Engineer. Ability to read and follow drawings, method statements and specifications. Technical knowledge of Fit out worksInterested Candidates Can Apply2020-01-06 16:07:35 |
Apply Now |
Fit Out foreman
INR7"YEARLY"
Fit Out ForemanFull Time (3-6 Yrs )Super Asia Manpower Services |
Qatar
Not Mentioned
qatar
0qatar
|
06-01-2020 2020-04-05Job Location : QatarGood Salary will be Offered. Requirement : Candidates must have 2 years experience in Interior Fit out Works. Capable of supervising the works assigned and arranging materials/ labour accordingly for the site and report to Product Engineer. Ability to read and follow drawings, method statements and specifications. Technical knowledge of Fit out worksInterested Candidates Can Apply2020-01-06 16:07:35 |
Apply Now |
Operations Manager
INR7"YEARLY"
Operations ManagerFull Time (5-10 Yrs )Rapid Access |
Dubai
,
United Arab Emirates
United Arab Emirates
0dubai
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
06-01-2020 2020-04-05Job Location : UAEGood Salary will be Offered.Requirement : The chosen candidate will meet ALL the essential criteria below: ESSENTIAL Tertiary level educational qualification (or above) in mechanics, engineering, health and safety or similar Extensive technical, operational or HSE knowledge within the powered access, heavy plant, construction or engineering industry sector as a manager, foreman or supervisor Ability to read, interpret and apply written instructions for repair and maintenance of equipment Proficient Microsoft Office such as Word and Excel o Good knowledge of safe operational and equipment practices and applicable laws, rules and regulations Experience of supervising and motivating with the ability to schedule and prioritise the work of others to meet deadlines Experience of working to manage a team within a high-pressured environment for a challenging client A clean driving licence DESIRABLE Vocational qualification in industry-related subject area IPAF Operator Licence and /or IPAF Demonstrator Licence Experience supervising multicultural teams Experience of working within the Aviation SectorInterested Candidates Can Apply2020-01-06 16:07:29 |
Apply Now |
Mill Wright foreman
INR7"YEARLY"
Mill Wright ForemanFull Time (10-13 Yrs )Placewell HRD Consultants |
Sharjah
,
United Arab Emirates
United Arab Emirates
0sharjah
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
06-01-2020 2020-04-05Job Location : UAEGood Salary will be Offered.Requirement : Should have 10 years Experience as Mill Wright foreman UAE Turbine experience MustInterested Candidates Can Apply2020-01-06 16:07:27 |
Apply Now |
foreman - Electrical
INR7"YEARLY"
Foreman - ElectricalFull Time (8-10 Yrs )Ramaco Trading & Contracting Co |
Doha
,
Qatar
Qatar
0doha
Qatar
Not Mentioned
qatar
0qatar
|
06-01-2020 2020-04-05Job Location : QatarGood Salary will be Offered.Requirement : Has a Diploma in Electrical Engineering or related course 8-10 years of work experience in the same position handling building construction projects Knowledge in power and ELV systems, KAHRAMAA inspection and procedures. and QCDD inspection and procedures Must Have Noc And Transferable VisaInterested Candidates Can Apply2020-01-06 16:07:25 |
Apply Now |
foreman
INR7"YEARLY"
ForemanFull Time (3-5 Yrs )Alnoor Neon |
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
06-01-2020 2020-04-05Job Location : UAEGood Salary will be Offered.Requirement : Candidate with Experience 3 to 5 years Candidate with Sticker Printing, 3 D letter, Fixing and Cutting Experience (related Advertising work) Must have experience before an Advertising Field Must have good communication skills.Interested Candidates Can Apply2020-01-06 16:07:25 |
Apply Now |
Civil foreman
INR7"YEARLY"
Civil ForemanFull Time (3-6 Yrs )Aljassar Group |
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
03-01-2020 2020-04-02Civil foremanJob Location : RiyadhSalary, 1500 SR (8 hours) + 200 SR + accommodation + overtime + another all facilities as per Saudi Labor law.Visa already available there.Requirements : Must be available immediately Must have minimum 3 years experience as Civil foreman Should be from India Only ECNR passportInterested candidate can apply with your updated resume.2020-01-03 15:38:48 |
Apply Now |
Stainless Steel foreman
INR7"YEARLY"
Stainless Steel ForemanFull Time (5-7 Yrs )Smart Kitchen Co. |
Shuwaikh
,
Not Mentioned
shuwaikh
0shuwaikh
Kuwait
Not Mentioned
kuwait
0kuwait
|
03-01-2020 2020-04-02Stainless Steel foremanJob Location : ShuwaikhRequirements : 5 years experience as Stainless Steel foreman Need Transferable visa 18 Interested candidate can apply with your updated resume2020-01-03 15:38:47 |
Apply Now |
foreman Business Controller
INR7"YEARLY"
Foreman Business ControllerFull Time (3-5 Yrs )Unique Pattern |
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
03-01-2020 2020-04-02foreman Business Controller for Riyadh-based company Job Location : RiyadhRequirements : No less than 3 years experience in related field A resident of Riyadh. He has a car and a valid Saudi driving license. A valid, transferable residence.Interested candidate can apply with your updated resume2020-01-03 15:38:45 |
Apply Now |
Driver / foreman
INR7"YEARLY"
Driver / ForemanFull Time (1-2 Yrs )Rocky Real Estate |
Dubai
,
United Arab Emirates
United Arab Emirates
0dubai
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
02-01-2020 2020-04-01Job Location : UAEGood Salary will be Offered.Requirement : Should have 1-2 years experience as Driver / foreman Monitoring the technicians team Valid UAE Drivers License Knowledge on property maintenanceInterested Candidates Can Apply2020-01-02 17:00:52 |
Apply Now |
Electrical Supervisor
INR7"YEARLY"
Electrical SupervisorFull Time (5-10 Yrs )Behzad Group |
Bahrain
Not Mentioned
bahrain
0bahrain
|
02-01-2020 2020-04-01Job Location : BahrainGood Salary will be Offered.Requirement : Should have 2 years experience as Electrical Supervisor Should be Located at Bahrain Interested Candidates Can Apply2020-01-02 17:00:46 |
Apply Now |
Site Engineer - Civil (Power Plant - Duqm refinery in Oman)
INR7"YEARLY"
Site Engineer - Civil (Power Plant - Duqm refinery in Oman)Full Time (6-12 Yrs )Alghanim International |
Duqm
,
Not Mentioned
duqm
0duqm
Oman
Not Mentioned
oman
0oman
|
30-12-2019 2020-03-29MAIN PURPOSE OF JOB
To supervise the construction of Power Plants to ensure the work is executed to the client's specifications.JOB OBJECTIVES
1. To plan and schedule the work and efficiently organise the site/facilities in order to meet an agreed programme of deadlines.2. To attend regular meetings with clients, architects and consultants and keeping them informed of progress.3. To supervise and monitor the site labour force through General foreman and or Supervisors, monitoring the work of any subcontractors to complete the work as per customer's satisfaction.4. To oversee quality control and safety matters on the site, and ensure that regulations are adhered to.5. To resolve any unexpected technical difficulties and other problems that may arise at any time.6. To oversee the selection and requisition of materials for use in the construction/maintenance, to check whether the materials are as specified.7. To supervise and ensure proper maintenance of materials and to advise on technology and modifications required for a simpler and cost saving mechanism.8. To prepare necessary paperwork for the completion of work and get it authorized by the client after their inspection.9. To develop a relationship with the Project Engineer and prepare periodical reports on the progress of work2019-12-30 17:11:16 |
Apply Now |
Automotive foreman
INR7"YEARLY"
Automotive ForemanFull Time (5-10 Yrs )Confidential Company |
Abu Dhabi
,
United Arab Emirates
United Arab Emirates
0abu dhabi
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
30-12-2019 2020-03-29Performs supervisory responsibilities for managing all aspects of automotive repair and preventive maintenance of an automotive shop, including establishing uniform policies and practices. Keeps vehicle records filed and updated and monitors vehicles for serviceability and safety.2019-12-30 17:11:09 |
Apply Now |
foreman HVAC Technician
INR7"YEARLY"
Foreman HVAC TechnicianFull Time (3-7 Yrs )Aljassar Group |
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
30-12-2019 2020-03-29foreman HVAC Technician Job Location : RiyadhSalary, 2000 SRVisa already available there.Requirements : Must have minimum 3 years Gulf experience as a foreman HVAC Technician Must have experience, AC Technician, Duct Technician, fix box, Installation etc. Must have Gulf experience same position Should be from PakistanInterested candidate can apply with your updated resume.2019-12-30 15:06:25 |
Apply Now |
Welding foreman
INR7"YEARLY"
Welding ForemanFull Time (4-8 Yrs )Voltech HR Services |
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
30-12-2019 2020-03-29Job Location : Saudi Arabia Good Salary will be Offerd. Requirement : Should have 4-8 years Experience as Welding foreman Should be Located at Saudi ArabiaInterested Candidates Can Apply2019-12-30 15:06:23 |
Apply Now |
MECHANICAL TECHNICIAN (Process/Offsites/IRS&L)
INR7"YEARLY"
MECHANICAL TECHNICIAN (Process/Offsites/IRS&L)Full Time (4-9 Yrs )Confidential Company |
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
27-12-2019 2020-03-26We are looking for Mechanical Technician (Process/Offsites/IRS&L) for Saudi Arabia.1.Basic Function and Scope :Carries out the skilled maintenance, overhaul and repair of Plant and equipment in their respective assigned Process or Offsites areas. Includes regular monitoring, disassembly, repair and reassemble of equipment as well as implementation of modifications.2.Tasks and Dutiesa)Carries out the skilled maintenance on such items of Plant and equipment as gas turbines, compressors, alternators, steam turbines, pumps, fans, boilers, vessels, columns, heat exchangers, LNG storage tanks, loading arms, flares, flares, filters, valves, etc.b)Uses a variety of tools and measuring devices, such as hammers, wrenches, pneumatic tools, high pressure jetting and drilling equipment, grinders, calipers, feeler gauges, micrometers, verniers, clock gauges, dial indicators, etc. In accordance with permit to work system. Ensures that tools used are correctly calibrated. Must be able to work to very close tolerance.c)Ensures that materials and spare parts are available and in good condition before starting maintenance activity.d)Carries out routine preventive maintenance of machinery and static equipment according to schedules, check lists and specific equipment requirements. This includes changing oils, cleaning strainers, replacing filters, greasing and general overhaul of equipment. Repairs and or replaces defective parts, reassembles overhauls equipment.e)Carries out a wide range of corrective maintenance and repairs as a result of condition monitoring checks or failures of equipment. This includes the dismantling of various static and rotating equipment, the repair, the equipment reassembly and the recommissioning.f)Carries out other similar or related duties such as modifications, installation, pre-commissioning and commissioning of new equipment, involvement in commissioning of new Projects handled by Third Party.g)Makes routine checks to ascertain faults in Plant and machinery by feel, sight or sound and carries out minor repairs as necessary. Notifies foreman of more serious malfunctions.2019-12-27 15:55:01 |
Apply Now |
Mechanical Engineer
INR7"YEARLY"
Mechanical EngineerFull Time (8-12 Yrs )Bahrain Mechanical Construction Company (BAMCO) |
Manama
,
Bahrain
Bahrain
0manama
Bahrain
Not Mentioned
bahrain
0bahrain
|
26-12-2019 2020-03-25These are the duties and responsibilities, not limited to, that we expect from a mechanical engineer candidate.
Drawing studying and BOQ preparation
Fabrication and erection drawings preparation
Material procurement and preparation of cutting layouts
Fabrication supervision
Installation supervision at site
Labour allocation and time sheet record-keeping
Client review meeting attending
Attending to site visits inquiries and sketch / BOQ preparation
Preliminary negotiation with vendors
Record keeping of materials in store and at site
Daily work update to senior management
Construction programme preparation
Method statement preparation
Maintain a good rapport with foreman, workers, sub-contractors and external contractors
Prepare inspection reports of various kinds
HSE certification preferred.2019-12-26 18:06:39 |
Apply Now |
Logistics foreman
INR7"YEARLY"
Logistics ForemanFull Time (3-6 Yrs )Al Manaratain |
Bahrain
Not Mentioned
bahrain
0bahrain
|
26-12-2019 2020-03-25? Recommend procedure changes to ensure timely delivery of products and materials
? Ensures that the vehicles are up and operational for daily use.
? Ensures that Drivers and helpers starts duty on time as per work standards.
? Informing all drivers to check the vehicles before start duty (oil, water, diesel, brakes, lights, etc.) and be sure that they checked the vehicles.
? Coordinating with the garage regarding vehicles breakdown.
? Monitoring the performance of all drivers.
? Making the schedule for delivery plan for delivery of finished products according to the requirements received from sales departments.
? Signing the attendance for all drivers.
? Checking the delivery site logistics and facilities.
? Coordinating with factory supervisor regarding needed raw materials.
? Going to the sites in order to organize the delivery of products like (shell, washed, sand, dust, aggregate etc.).
? Surveying the drivers and vehicles.
? Checking the tracking system.
? Managing company customers over the phone (if contacted by customer)
? Coordinating with Yard dumper operators for loading & unloading of material
? Performing additional duties as requested by supervisor2019-12-26 18:06:32 |
Apply Now |
STEEL / STRUCTURAL DRAUGHTSMAN
INR7"YEARLY"
STEEL / STRUCTURAL DRAUGHTSMANFull Time (5-6 Yrs )Client of Ambe International |
Bahrain
Not Mentioned
bahrain
0bahrain
|
26-12-2019 2020-03-25Open Position :Steel Draftsman/Structural Draftsman -Salary : BHD 250 BHD 20 (Allowance) Accomodation TransportationReading ship's steel structure drawings,Knowledge of steel materials using in ship building / ship repair industryKnowledge of ship building / ship repairing principles in terms of steel structure basic requirements and classification societies relevant rules and regulationsAbility to perform algebraic and geomatrical calculus's required to perform and execute work preparation drawings, materials and men-hours estimation requirements, and written reporting jobs as donePartcipation is steel work identification in the workshop and ON- BOARD vessel as and when requiredProcuring detailed drawings and sketches for work excution basis on vessel steel structure drawings, in-siut steel work identification and information provided in writing and/or verbally by Steel foreman, Steel Supervisors and/or other authorized perssonelBasis on work identification estimation of men-hours requirements and follow- up in close with Supervisor-in-chargeFollowing instructions given by Supervisors in regard to the jobNotification of direct Superior on deviations in work scope observed in comparison with intial request and order, as well as reporting all irregularities and faults in the job executionPerforming jobs in accordance with relevant classification society rules and/or following good practice, effciently, with good quality and avoiding all unnecessary wastagesTimely reporting at work place, obeying all respective safety regulationsEDUCATION :B E / Diploma in Structural or Mechanical/Structural Engineering or EquivalentExperienced and competent computer aided design (CAD) operatorGood command of written and spoken EnglishGood communication skillsEXPERIENCE :5 to 6 years minimum drafting experience with the majority in MarineIndustries upon 3D / 2D modeling and knowledge of relevant softwareNote : All candidates must be well experienced in Shipyard.Regards,RakshaliAmbe International2019-12-26 18:06:30 |
Apply Now |
General foreman WALK IN INTERVIEW
INR7"YEARLY"
General Foreman WALK IN INTERVIEWFull Time (2-5 Yrs )Taif Al Madina Contracting L.L.C |
Dubai
,
United Arab Emirates
United Arab Emirates
0dubai
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
26-12-2019 2020-03-25We are looking for General foreman WALK IN INTERVIEW for UAEWALK IN INTERVIEW:Address -Falcon House, G6 Dubai Investment Park
Interview Time- Tuesday to Thursday 10 AM to 4 PM
Point of Contact : NadeemResponsibilities:
Controlling the quality of work.
Allocation of Manpower based on Target Program.
Achieving of Target assigned by Superiors.
Making of day to day worker allocation planning.2019-12-26 17:50:13 |
Apply Now |
Mechanical foreman / Piping foreman
INR7"YEARLY"
Mechanical Foreman / Piping ForemanFull Time (5-10 Yrs )Al-Shahad Regional General Trading and Contracting |
Kwd 250
,
Not Mentioned
kwd 250
0kwd 250
600 (€728
,
Not Mentioned
600 (€728
0600 (€728
€1
,
Not Mentioned
€1
0€1
747)
Not Mentioned
747)
0747)
|
26-12-2019 2020-03-25Oil & Gas - Refinery, Petrochemical, Power Utility, Industrial Utility2019-12-26 17:50:07 |
Apply Now |
Engineer (Instrument & Control)
INR7"YEARLY"
Engineer (Instrument & Control)Full Time (10-15 Yrs )Bilfinger Kuwait |
Kwd 850
,
Not Mentioned
kwd 850
0kwd 850
1
,
Not Mentioned
1
01
000 (€2
,
Not Mentioned
000 (€2
0000 (€2
475
,
Not Mentioned
475
0475
€2
,
Not Mentioned
€2
0€2
912)
Not Mentioned
912)
0912)
|
26-12-2019 2020-03-25• responsible for designing, developing, installing, managing and maintaining equipment which is used to monitor and control engineering systems, machinery and processes.
• Control and instrumentation (C&I) engineers are responsible for designing, developing, installing, managing and maintaining equipment which is used to monitor and control engineering systems, machinery and processes.• To plan and schedule the work and efficiently organize the site / facilities in order to meet an agreed programme of deadlines.• To attend regular meetings with clients, architects, consultants, and keeping them informed of progress.• To supervise and monitor the site labour force through General foreman and or Supervisors, monitoring the work of any subcontractors to complete the work as per customer's satisfaction.
• To oversee quality control and safety matters on the site, and ensure that regulations are adhered to.• To resolve any unexpected technical difficulties and other problems that may arise at any time.• To oversee the selection and requisition of materials for use in the construction / maintenance, to check whether the materials are as specified.• To supervise and ensure proper maintenance of materials and to advise on technology and modifications required for a simpler and cost saving mechanism.
• To prepare necessary paperwork for the completion of work and get it authorised by the client after their inspection.2019-12-26 17:50:05 |
Apply Now |
Transport & Logistics Supervisor
INR7"YEARLY"
Transport & Logistics SupervisorFull Time (4-8 Yrs )ARENA EVENTS LIMITED (DUBAI BRANCH) |
Abu Dhabi
,
United Arab Emirates
United Arab Emirates
0abu dhabi
Dubai
,
United Arab Emirates
United Arab Emirates
0dubai
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
23-12-2019 2020-03-22Plan and supervise the transport from workshop to project site
Schedule daily routes to deliver the material/multi-drop deliveries.
Track orders, deliveries schedules and log in report for drivers.
Coordinate with supervisors/foreman to ensure proper storage and distribution of products
Monitor and report on transportation costs
Ensure efficient filing system pertaining to various deliveries and shipments.
Coordinate the maintenance and repair for commercial vehicles and equipment
Research and suggest cost-effective shipping methods
Organize training sessions for drivers along with HSE officer (e.g. proper use of machines and handling of hazardous material)
Ensure compliance with company policies and shipping legislation
Assist Operations Manager with day to day administrative tasks
Coordinating and establish high standards in housekeeping
Assisting during build up and dismantling on site if require
Directing all transportation activities and developing transportation relationships.
Maintaining records and scheduling the registration renewals for the company owned vehicles.2019-12-23 18:05:20 |
Apply Now |
Auto Mechanic
INR7"YEARLY"
Auto MechanicFull Time (3-8 Yrs )AL ROSTAMANI TRADING COMPANY LLC |
Abu Dhabi
,
United Arab Emirates
United Arab Emirates
0abu dhabi
Dubai
,
United Arab Emirates
United Arab Emirates
0dubai
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
23-12-2019 2020-03-22Functional
•Identifies the customers' requests, analyses them with his Supervisor/foreman, and refines the diagnostic process.
•Performs the requested work, in observance of the manufacturer's methods (recommendations and operating procedures) to ensure efficient use of time.
•Communicates with the foreman during the work to inform him of the check results and of his work, and also to ask for his help or assistance and assists Technicians as needed.
•Masters the various repair techniques and uses the documentation as necessary, sharing his knowledge with Technicians.
•Observes the safety rules defined for the equipment, instruments and products.
•Observes the work time set by the foreman.
•Carries out, on his own initiative, minor work not requested by the customer.
Operational
Places protective equipment on the vehicle (if not already done).
•Prepares, under the foreman's responsibility, the supplies outward sheet for parts to be replaced and transfers them from the Spare Parts to service as required.
•Prepares the tools, equipment required to complete each task and ensures all components at the periphery of the work location are in operational condition.
•Performs safety inspections and completes the quality control sheets and necessary test documents.
•Undertakes the requested work in accordance with the work order.
•Identifies additional work, non-conformance and rapidly communicates them to the foreman and documents the incidences on the work order.
•Informs the foreman of any incident which might cause a delivery delay.
•Perform selective sorting of waste, within the frame of the applicable rules.
•Performs diagnostic tests using appropriate equipment.
•Prepares the vehicle for delivery by ensuring all equipment and accessories are in place and the vehicle has been cleaned, returning any damaged or old parts to the customer if requested.Procedural
•Observes the work schedules and times set by the Job Controller / foreman.
•Applies the manufacturer's directives and the safety rules.
•Searches for information in the available documentation (technical manuals, repair booklets, supplier’s data).
•Observes the labor analysis procedures and supplies and parts issuing procedures.JOB REQUIREMENTS:
?High School Certificate/ Diploma (12 years of schooling education), • Preferably 3 years Diploma (OR) 2 year I.T.I in Automobile?The position holder must be less than 45 years old.
?Strong background in the automotive mechanical field
?Having thorough knowledge of automotive service and repair works
?Valid UAE drivers’ licence would be an added advantage.2019-12-23 18:05:16 |
Apply Now |
Auto Mechanic
INR7"YEARLY"
Auto MechanicFull Time (3-8 Yrs )AL ROSTAMANI TRADING COMPANY LLC |
Abu Dhabi
,
United Arab Emirates
United Arab Emirates
0abu dhabi
Dubai
,
United Arab Emirates
United Arab Emirates
0dubai
Sharjah
,
United Arab Emirates
United Arab Emirates
0sharjah
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
23-12-2019 2020-03-22Functional
•Identifies the customers' requests, analyses them with his Supervisor/foreman, and refines the diagnostic process.
•Performs the requested work, in observance of the manufacturer's methods (recommendations and operating procedures) to ensure efficient use of time.
•Communicates with the foreman during the work to inform him of the check results and of his work, and also to ask for his help or assistance and assists Technicians as needed.
•Masters the various repair techniques and uses the documentation as necessary, sharing his knowledge with Technicians.
•Observes the safety rules defined for the equipment, instruments and products.
•Observes the work time set by the foreman.
•Carries out, on his own initiative, minor work not requested by the customer.
Operational
Places protective equipment on the vehicle (if not already done).
•Prepares, under the foreman's responsibility, the supplies outward sheet for parts to be replaced and transfers them from the Spare Parts to service as required.
•Prepares the tools, equipment required to complete each task and ensures all components at the periphery of the work location are in operational condition.
•Performs safety inspections and completes the quality control sheets and necessary test documents.
•Undertakes the requested work in accordance with the work order.
•Identifies additional work, non-conformance and rapidly communicates them to the foreman and documents the incidences on the work order.
•Informs the foreman of any incident which might cause a delivery delay.
•Perform selective sorting of waste, within the frame of the applicable rules.
•Performs diagnostic tests using appropriate equipment.
•Prepares the vehicle for delivery by ensuring all equipment and accessories are in place and the vehicle has been cleaned, returning any damaged or old parts to the customer if requested.Procedural
•Observes the work schedules and times set by the Job Controller / foreman.
•Applies the manufacturer's directives and the safety rules.
•Searches for information in the available documentation (technical manuals, repair booklets, supplier’s data).
•Observes the labor analysis procedures and supplies and parts issuing procedures.JOB REQUIREMENTS:
?High School Certificate/ Diploma (12 years of schooling education), • Preferably 3 years Diploma (OR) 2 year I.T.I in Automobile?The position holder must be less than 45 years old.
?Strong background in the automotive mechanical field
?Having thorough knowledge of automotive service and repair works
?Valid UAE drivers’ licence would be an added advantage.2019-12-23 18:05:07 |
Apply Now |
foreman
INR7"YEARLY"
FOREMANFull Time (2-8 Yrs )Mohammed M. Al Rashid Co. (MARCO) |
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
23-12-2019 2020-03-22REPORTING TO: Site Engineer RESPONSIBILITY STATEMENT: To efficiently manage the day to day construction activities of the Project in consultation with the Site Engineers and to report on these activities to the Construction ManagerPOSITION RESPONSIBILITY: • Assesses equipment, materials and labor needed to complete large and/or complex construction tasks for the purpose of ensuring that activities meet the project standards and resolve defined issue(s) while reducing wasted resources. • Assists in the personnel management of resources for the purpose of maintaining staffing needs and productivity of the work force. • Coordinates the services and activities of outside contractors, as assigned, for the purpose of ensuring that work is completed in a safe, effective and timely manner. • Directs assigned staff in resolving complex and/or difficult issues for the purpose of ensuring that work locations are maintained in a safe and effective working environment. • Maintains a variety of manual and electronic files and/or records for the purpose of providing up-to-date reference and complying with regulatory requirements and established guidelines. • Maintains assigned tools, equipment and vehicle(s) for the purpose of ensuring their availability as needed to meet assigned objectives. • Performs a wide variety of skilled construction related activities for the purpose of ensuring that work issues are resolved and projects are completed in a safe, effective and timely manner. • Prepares a variety of project-mandated documents and reports for the purpose of documenting activities and complying with the requirements. • Prioritizes and assigns related work orders to skilled labors for the purpose of ensuring that locations are maintained in a safe working environment meeting guidelines and budgetary limits. • Performs other related duties as assigned for the purpose of ensuring the efficient and effective functioning of the work unit.2019-12-23 18:05:05 |
Apply Now |
Fabricator Welder
INR7"YEARLY"
Fabricator WelderFull Time (5-10 Yrs )Port of Salalah |
Oman
Not Mentioned
oman
0oman
|
23-12-2019 2020-03-22We are looking for Fabricator Welder Job Description:Essential Duties and Responsibilities1. Selects appropriate equipment and materials, and plans layout, assembly and welding.2. Lays out, positions, aligns and fits components together.
3. Bolts, clamps, and tack-welds parts to secure in position for welding.4. Sets up equipment and welds parts, using arc, gas-shielded arc, or gas welding equipment.5.Assembles part by bolting and riveting.6. Repairs parts by dismantling, straightening, reshaping and reassembling.7. Maintains a neat, tidy and safe work station.8. Follows all health and safety rules and regulations for work area.9. Informs foreman of any workmanship issues, requests checking of work when appropriate, and seeks approval of completed work product as required.10. Performs any other related activities, as requested.2019-12-23 18:05:03 |
Apply Now |
Electrical foreman
INR7"YEARLY"
Electrical ForemanFull Time (5-10 Yrs )Arail LLC |
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
23-12-2019 2020-03-22Electrical foremanAbout Company :For over 25 years, Arail LLC has been serving the rather challenging construction and industrial need in the Kingdom of Saudi Arabia as one of the most respectful general contracting companies.Job Location : RiyadhNumber of Vacancies : 5 NosRequirements : Minimum 5 to 10 years experience in construction field. Need valid transferable iqama Should be located in RiyadhNote : Only shortlisted candidates will be contactedInterested candidate can apply with your updated resume.2019-12-23 16:06:18 |
Apply Now |
Finishing foreman
INR7"YEARLY"
Finishing ForemanFull Time (5-10 Yrs )Arail LLC |
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
23-12-2019 2020-03-22Finishing foremanAbout Company :For over 25 years, Arail LLC has been serving the rather challenging construction and industrial need in the Kingdom of Saudi Arabia as one of the most respectful general contracting companies.Job Location : RiyadhNumber of Vacancies : 5 NosRequirements : Minimum 5 to 10 years experience in construction field. Need valid transferable iqama Should be located in RiyadhNote : Only shortlisted candidates will be contactedInterested candidate can apply with your updated resume.2019-12-23 16:06:17 |
Apply Now |
Electrical foreman
INR7"YEARLY"
Electrical ForemanFull Time (3-5 Yrs )Quebec General Contracting Company |
Fahaheel
,
Not Mentioned
fahaheel
0fahaheel
Kuwait
Not Mentioned
kuwait
0kuwait
|
23-12-2019 2020-03-22Electrical foremanAbout Company :Quebec General Contracting Company is a new innovative in outsourcing services for large-scale recruiting and workforce intensive initiatives. We are committed to superior quality and results.Job Location : SalmiyaRequirements : Must be living in Kuwait Can read drawings and handle a team Have minimum 3 years experience as Electrical foreman Good communication skillNote : Only shortlisted candidates will be contactedInterested candidate can apply with your updated resume2019-12-23 16:06:14 |
Apply Now |
foreman
INR7"YEARLY"
ForemanFull Time (2-4 Yrs )Grow craft Human Resource Consultancy |
Sharjah
,
United Arab Emirates
United Arab Emirates
0sharjah
United Arab Emirates
Not Mentioned
united arab emirates
0united arab emirates
|
23-12-2019 2020-03-22Job Location : UAESalary : 3500/-AEDRequirement : Should have experience in Installation, Testing and Commissioning fire alarm systems in commercial/industrial projects. Should be an Arabic speaker. U.A.E Driving license requiredInterested Candidates Can Apply2019-12-23 16:06:13 |
Apply Now |
Technician GSE Omani National
INR7"YEARLY"
Technician GSE Omani NationalFull Time (1-6 Yrs )Oman Air |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
07-01-2020 2020-04-06Mechanical To perform all mechanical repair and maintenance works for all kinds of nonmotorized ground support equipment vehicles according to checklist delegated by the SupervisorLead Technician as per daily Job Card. Testdrive the equipmentvehicle after maintenance andor repair. Electrical Perform all types of ABCD checks on all incoming equipment due for electrical service, according to checklist delegated by the foreman Electrician as per daily Job Card. Airconditioning Perform all types of AirConditioning repair service jobs on all incoming G.S. EquipmentVehicles due for AirConditioning servicerepairs in GSE WShop, according to service checklist delegated by the GSE WShop Supervisor and AirConditioning Supervisor as per daily GS Equipment Job Card. Technician Common Duties Refer to the manuals and publications for heavy repair maintenance jobs, treat them with utmost care and return to the storage after completion of the job. Make entries in the job card for all jobs that has been carried out upon completion and report the status to the SupervisorLead Technician. Monitor work area and ensure that all tools, materials and equipment used are handled and operated in a safe manner and loan items are returned to the Stores after completion of assigned jobs. Follow up with stores for pending parts requisitions to complete work on time as per Job Cards and report to the Supervisor on unavailable low stock to procurerefill in order to avoid repair works being delayed due to unavailability of spare parts. Note all discrepancies found during the work time and bring it to the attention of the Supervisor for further actions Ensure to keep all work areas clean and tidy after completion of work orders at all times. Ensure compliance to safety and security regulations. Update knowledge of current company policy and procedures by reading, memo, circulars and manual updates. Two years college Diploma in related discipline Or Secondary School Certificate having 2 years work experience with Specialised certificate / license as automobile mechanic/electrician/aircon technician in a similar profile / industry will be an advantage About the Company Oman Air, the flagship company of the Sultanate of Omans Civil Aviation sector, commenced operations in 1993. Starting off as a regional player, Oman Air, as Omans national carrier has witnessed rapid growth in the last 14 years. Oman Air has played a major role in making Muscat a major traffic hub in the Middle East providing a fillip to commercial, industrial and tourism activities.As a fullfledged commercial airline of Oman, Oman Air has striven to maintain high performance standards in all aspects of its operation. The Oman International Services was established in the year 1970 later Oman Aviation Services was founded on 1981 to extend services to the other airlines in terms of cargo handling, ground handling etc.The Oman Air fleet consists of most modern and fuel efficient aircraft with aesthetically designed interiors. Ultra modern inflight service equipment is deployed onboard to improve safety and overall performance. Investment in new technology, planning and product innovation has propelled Oman Air to the forefront of the aviation industry. Apply Now2020-01-07 00:23:00 |
Apply Now |
