Hydraulic technician - Cranes 
INR7"YEARLY"
Hydraulic Technician - CranesFull Time (5-10 Yrs )Al Hashar Group |
Azaiba
,
Not Mentioned
azaiba
0azaiba
Oman
Not Mentioned
oman
0oman
|
23-08-2019 2019-11-21We are looking for Hydraulic technician - Cranes for OmanCranes hydraulic troubleshooting and repairing such us, hydraulic cylinders, control valves & pumps.2019-08-23 12:58:28 |
Apply Now |
Buses /Trucks technician
INR7"YEARLY"
Buses /Trucks TechnicianFull Time (4-9 Yrs )Al Hashar Group |
Muscat
,
Oman
Oman
0muscat
Ibri
,
Not Mentioned
ibri
0ibri
Duqum
,
Not Mentioned
duqum
0duqum
Oman
Not Mentioned
oman
0oman
|
23-08-2019 2019-11-21Service and repairs of buses/trucks.Engine and transmission overhauling, Diagnostic repair related to Electronic system such as ECM, common rail etc.2019-08-23 12:58:28 |
Apply Now |
FIELD HVAC SUPERVISORS -SERVICES & MAINTENANCE
INR7"YEARLY"
FIELD HVAC SUPERVISORS -SERVICES & MAINTENANCEFull Time (12-16 Yrs )Al Noor Projects Engineering & Trading LLC |
Oman
Not Mentioned
oman
0oman
|
23-08-2019 2019-11-21Technical responsibilities:01 Installs, maintains and repairs of all kind of air-conditioning Equipment, such as Split units, packaged units , air-handling units, condensing units, air-cooled chillers, chilled water pumps, fan coil units,
02 Repairs of all kind of controls, controllers, control panel, electrical parts of AC units
03 To organize, supervise and attend all breakdown calls of air-conditioning equipment/sites, interact with the client’s Engineers, prepare/ submit reports for the completion of work.
04 Knowledge of all kind soldering and brazing of copper tubing and piping, gas charging, flushing, etc. in an emergency.
05 Commissioning of all kind of air-conditioning Equipment, such as such as Split units, packaged units, air-handling units, condensing units, air-cooled chillers, chilled water pumps, fan coil units,
06 Measurement, preparation and documentation of commissioning reports for all kind of air-conditioning Equipment such as Chillers, VRF, Packaged units, etc.
07 Knowledge of using all kind of tools needed for the service and maintenance work.
Knowledge of using Refrigerant Recovery units, velocity meter for measuring airflow.
Knowledge of using pneumatic pressure gauge meter for the measurement of negative and positive pressure inside the air-conditioned space.
08 Knowledge of performing diagnostic inspection on all external / Internal components of air-cooled chillers, pumps, air-handling units, motors, and control panels, properly diagnose faults and Identify the requirements of parts, repairs of the same and commissioning of the system.
09 Knowledge of performing diagnostic inspection on all external/internal components of VRF units, and rectify all faults and breakdown of VRF units.
10 Knowledge of replacing condenser coils for the chillers/packaged units/condenser/evaporator
11 Knowledge of over-hauling of open type reciprocating compressor
12 Knowledge of replacing all kind of compressor, cleaning, vacuuming, flushing, gas charging, commissioning and handing over successfully.
13 Knowledge to read all technical manuals, drawings, and blueprints of control circuits, refrigeration circuits of the air-conditioning equipment and carry out the work as required and instructed.
Supervisory Abilities
14 To organize, supervise and attend all breakdown calls of air-conditioning equipment/sites, interact with the client’s Engineers, prepare/ submit reports for the completion of work and submit the invoices.
15 Preparation , documentation and submission of commissioning reports for all kind of air-conditioning equipment such as Split units, packaged units, air-handling units, condensing units, chillers, etc.
16 Having ability and skills to communicate with the client effectively.
17 To prepare a PPM schedule for all the sites, and implementation.
18 Allocation of manpower for various sites, preparation/submission of service reports.
19 Submission of invoices on time and follow-up of the payment with the client.
Interaction with the accounts department and to provide a list of all site expenses on a regular basis.
20 Preparation and submission of quotation for the AMC sites for the additional works and the follow-up of the same.
21 To implement safety procedures, work quality standard, job card and accountability for each technician and charge hand.
22 To prepare and maintain a list of minimum testing tools, medical kits and the inventory of consumables such as refrigerants/nitrogen cylinders/parts, etc. for any emergency.
23 To maintain a cordial relationships within the department, with our all customers/clients.2019-08-23 12:58:28 |
Apply Now |
Associate Specialist - Services Programs
INR7"YEARLY"
Associate Specialist - Services ProgramsFull Time (1-10 Yrs )General Electric (GE) |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Role Summary:Leading, EHS wise, a team responsible for day-to-day operations and maintenance activities at wind farm facility. This includes the development, planning and implementation of Environmental Health and Safety programs & policies as per the GE guidelines and industry best practices. This EHS coordinator position will function in a team which includes other members of plant level staff, technicians to ensure EHS compliance and strengthen our Wind Turbine Service and Maintenance team in OmanEssential Responsibilities:Ensure compliance of wind power plant operations with regulatory requirements relating to air, solid & hazardous waste, chemical, water, oil, greases, working at height, confined space and environmental health and safety.. Provide proactive leadership on all EHS and medical issues.. Create and run training sessions, refreshers for site personnel. Create and grow safety culture at assigned project. Implement / modify EHS programs and procedures to ensure company compliance and customer expectations. Maintain an in-depth knowledge of applicable Omani regulatory requirements. Modify and implement compliance tracking programs and record keeping systems. Provide and determine alternatives for issue resolution. Develop and work with site teams focused on EHS program development, implementation and improvementDrive accountability with all functions and associates to aggressively reduce accident and injuries.. Able to carry out risk, safety and hazard analysis.Apply ergonomic principles to improve workstations and minimize injuries.Develop and maintain excellent local and state agency relationships. Ability to work independently on the implementation of fault analyses and repair of wind turbine generator systems, including clarification of any client queries.. Planned and preventive maintenance of wind turbine generator systems.. Documenting of call-out responses, fault finding and repair work in service reports, logbooks and checklists. Management and documentation of corporate processes and IT-applications. Briefing/induction of external service provider and suppliers on site. Work for the continuous improvement of products and processes. Assistance of the technical leader of the area. Support in the development of training concepts
REQUIREMENTS:
Qualifications/REQUIREMENTS:. Degree in HSE from an accredited university or equivalent e.g. Nebosh; Occupational Health, Industrial Hygiene, Root Cause Analysis, Machine Safety, Law and Regulations, Chemical Safety, Manual Handling, Risk analysis, Fire Safety, Noise and Vibrations) or equivalent knowledge or experience or professional training in electrical, mechanical, mechatronics engineering (Engineer or Diploma certificate).3 years experience leading environmental and safety compliance programs in a power plant environment. Proven experience with exposure to several EHS areas in the field environment. Great knowledge in local (Omani) EHS legislation. Medical fitness and willingness for work at height (Basic Safety Training would be a plus). Fluency in English, oral and written communication, presentation, training, and negotiation skills. Strong oral and written communication skills and strong interpersonal and leadership skills. Have a high energy level and the ability to energize others. Team player with strong interpersonal skills, capable of working within a diverse team. Ability to interface effectively with all levels within the company as well as organizations outside GE (regulatory agencies)Demonstrated knowledge of EHS and government regulations.Advanced computer skills and familiar with MS-Office(word, excel, ppt etc.).. Able to work at heights and high level of physical fitness.. Willing to work sometimes also at the weekends.. Valid Omani Driving licence. Social skills and ability to motivate staff and performance assessment. technician or minimum 3 years practical experience in the power sectorDesired Characteristics:. NEBOSH qualified or regional EHS qualifications with proven experience in power generation sector/Oil and Gas/ FMCG/ Fertilizer sector etc.. Professional EHS certifications .Experience managing projects and/or EHS complianceTeam player with strong interpersonal skills. Electrical/ mechanical service or maintenance experience and willingness to work in troubleshooting of wind turbines will be an additional advantage.2019-08-22 15:50:54 |
Apply Now |
Electrical Repair technician (Omani Nationals Only)
INR7"YEARLY"
Electrical Repair Technician (Omani Nationals Only)Full Time (1-2 Yrs )Electrical Repair Technician (Omani Nationals Only)
National Oilwell Varco |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20DUTIES & RESPONSIBILITIES:Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and productsCarry out work instructions as given by Supervisor, e.g. work specifications, equipment operation.Monitor and control materials, products or equipment to detect defects or faults.Identify product defects and complete appropriate documentation when defects are identifiedRework and/or repair assembled equipment and products according to engineering specification changesMaintain quality and quantity of production.Check work via use of electrical test equipment.Support key initiatives such as on time delivery, schedule attainment, cost of qualityGenerate and implement improvement ideas and encourage idea generation among team members and stop work for safety, stop production for quality, and escalate concernsBe familiar with and use of proactive root cause problem solving (Fishbone etc.)Support all NCR reporting.Attend team brief meetings, actively engaging in positive discussions regarding potential problematic areas.Accurately describe events during quality related investigations, aiding the Supervisor to understand the root cause where required.Willingly assist Supervisor to eradicate identified potential areas of non-conformance.Respond to identified process improvements and implement them willingly.Report discrepancies in job route times as soon as they are identified. Communicate them to the Supervisor and implement changes when requested.Action all tasks assigned to maintain high levels of target achievement as designated by Supervisor.Take part and contribute in toolbox talks.Demonstrate awareness of and promote company objectives, policies and procedures.Ensure that all procedures/paperwork is completed, kept up to date and signed off by the relevant person.Ensure all company policies surrounding, health & safety, quality requirements and housekeeping are met.Adheres to inspection criteria, policies and procedures without exception.Travel as and when required.Carry out other duties as and when business requirements dictate as may be reasonably expected by line manager.StrategicAble to understand, evaluate and apply technical informationAble to adeptly learn the context of a challenge and quickly integrate new skillsHas solutions and suggestions that are effective in addressing the problem at handQualification:Preferred time served apprenticeship or experience minimum or 4 years experience in electrical work.DesirableDegree in electrical engineering.Experience:Working knowledge within an assembly & manufacturing environment including the preparation of componentsWorking knowledge (1 year ) within an electrical repair environment.Skill & Competencies:Computer literacy (including good command of Microsoft Office Excel, Word and Outlook).Ability to read and interpret engineering drawingsProficient in both written and spoken English2019-08-22 12:51:45 |
Apply Now |
Workshop repair technician (Omani Only)
INR7"YEARLY"
Workshop repair Technician (Omani Only)Full Time (1-2 Yrs )Workshop repair Technician (Omani Only)
National Oilwell Varco |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Responsibilities:Lay out, positions, aligns and fits components together using applicable machines, tools and equipment.Bolt, clamp and tack-weld parts to secure them in position for final weldingSet up and weld parts using welding equipmentFollow written and typed instructions and manufacturer's specifications.Must be able to write legibly, and know how to setup, operate and maintain welding equipment and associated toolsTo use hand tools and be able to correctly setup and operate applicable shop machinesMust be able to perform work with minimum supervision and exercise individual initiative and judgmentTo perform Tig and oxy-acetylene welding, cutting and brazing on various ferrous and nonferrous metals, in accordance with established factory methods and proceduresMaintain repair and production documentation as per required procedure.Perform other work related task as required as assignedComply with all NOV Company and HSE procedures and policiesFacility Specific:Carryout welding as per the approved procedure and work orderRecord all process parametersFollow work instructions and procedures.Notify non conformances and unsafe conditions.Follow Safety rules and regulationsQualifications / Requirements:High school, ITI, diploma or equivalent (welding certification)Meet NOV welding certification2019-08-22 12:51:45 |
Apply Now |
Maintenance Refinery Position in Oman
INR7"YEARLY"
Maintenance Refinery Position in OmanFull Time (10-16 Yrs )Maintenance Refinery Position in Oman
Sofomation |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Dear Sir,Greetings!!We are - SOFOMATION - a human resource staffing agency providing highest standards of quality and professionalism. We pride ourselves on our efficient, professional and yet personal services both to our clients and applicants and our ability to supply the right staff complements the recruitment needs of our esteemed clients.Vacant position Available:
Team Leader Rotating (Maintenance)
Team Leader Static (Maintenance)
Team Leader Instrumentation (Maintenance)
Team Leader Electrical (Maintenance)
Supervisor Maintenance (Rotating, Static, Electrical, Instrumentation, Civil, fabrication & welding)
Senior technician ((Rotating, Static, Electrical and Instrumentation, Civil, fabrication & welding)
Team Leader Planning (Maintenance)
Team Leader Warehouse
Team Leader Civil
Senior Planning
Supervisor Civil & Workshop
Senior Warehouse Specialist
Senior Performance Specialist
Team Leader / Sr. Engineer– E&I Maintenance
Supervisor /Sr. technician – E & I
Sr. Maintenance Planning Engineer EDUCATION: Bachelor /Diploma is must
Refinery industry experience is mandatoryJob Location: OmanDirect hire with Refinery companyCandidates should have massive experience in Refinery Plant most specifically the following:
AREA A: Heavy Oils: Crude Distillation Unit (CDU) / Vacuum Distillation Unit (VDU) / Saturated Gas Plant (SGP) / LPG Treatment Unit (LTU) / Kerosene Treatment Unit (KTU) / Delayed Coker Unit (DCU) or Coke Handling
AREA B: Hydroprocessing: Hydro Cracker Unit (HCU) / Diesel Hydrotreating Unit (DHT) / Hydrogen Production Unit (HPU) / Pressure Swing Adsorption (PSA)
AREA C: Sulfur: Sulfur Recovery Unit (SRU) / Amine Recovery Unit (ARU) / Sour Water Stripping (SWS), UTILITIES (Waste Water Treatment Plant – WWTP)
AREA D: Offsite / Logistics / Solid HandlingKindly reply with Updated CV and below details:Speciality in which Area, kindly specify:
Position Applied for:
Total years of experience:
Years of Experience In refinery:
Current salary in USD per month (Basic):
Other Benefits:
Expected salary in USD per month (Basic):
Date of Birth:
Nationality:
Notice period:2019-08-22 12:51:41 |
Apply Now |
Site Supervisor
INR7"YEARLY"
Site SupervisorFull Time (5-10 Yrs )Site Supervisor
Confidential Company |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20The Supervisor is responsible for the management of the Regular Services Crew at the PDO site in Oman and is expected to make a significant contribution to the strategic management of the power stations covered under the Contract.The Supervisor is also responsible in directing the weekly operational checks of remote Power Plants covered under the Contract, daily plant maintenance and repair of plant facilities and equipment.This job is on a rotation basis, 3 months ON and 1 month OFF.Main Duties and Responsibilities;•Control of all site related matters relating to the successful hook-up, installation and commissioning of the gas turbine and auxiliaries, its Control System, HMI/EWS interface to DCS, off-base cables and supports systems and ensuring site operations are in line with the budget
•Supervise Field technicians and subcontractors for all site related issues
•Leads a team of multi-discipline Regular Services Crew (RSC) in conducting plant weekly operational checks on remote power stations
•Execute all site operations according to the company quality and HSE plans
•Promote Engineering quality control, ensuring conformity to appropriate Gas Turbine engineering specifications in order to meet all customer and company requirements
•Supply a high level of technical support to client base and engineering staff
•Compiling and timely submission of detailed field reports
•Any other appropriate tasks as assigned by the Senior Engineer
•To work safely and in accordance with all company Health, Safety and Environmental rules and recommendations, and be proactive in maintaining a safe working environment.2019-08-22 12:51:30 |
Apply Now |
Electrical Repair technician (Omani Nationals Only)
INR7"YEARLY"
Electrical Repair Technician (Omani Nationals Only)Full Time (1-2 Yrs )Electrical Repair Technician (Omani Nationals Only)
NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20JOB PURPOSEAs Repair technician (Electrical) you will be responsible for reading and interpreting Electrical drawings, positioning parts for assembly as well as performing dis-assembly and assembly of electrical components, reporting quality issues of the day-to-day assembly and fitting of the full range of NOV Rig's product line. You will support, improve and lead on-time repair of products through specific techniques as well as innovative idea generation and creative, efficient problem solving. Your existing knowledge of best electrical practices.DUTIES & RESPONSIBILITIES:Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and productsCarry out work instructions as given by Supervisor, e.g. work specifications, equipment operation.Monitor and control materials, products or equipment to detect defects or faults.Identify product defects and complete appropriate documentation when defects are identifiedRework and/or repair assembled equipment and products according to engineering specification changesMaintain quality and quantity of production.Check work via use of electrical test equipment.Support key initiatives such as on time delivery, schedule attainment, cost of qualityGenerate and implement improvement ideas and encourage idea generation among team members and stop work for safety, stop production for quality, and escalate concernsBe familiar with and use of proactive root cause problem solving (Fishbone etc.)Support all NCR reporting.Attend team brief meetings, actively engaging in positive discussions regarding potential problematic areas.Accurately describe events during quality related investigations, aiding the Supervisor to understand the root cause where required.Willingly assist Supervisor to eradicate identified potential areas of non-conformance.Respond to identified process improvements and implement them willingly.Report discrepancies in job route times as soon as they are identified. Communicate them to the Supervisor and implement changes when requested.Action all tasks assigned to maintain high levels of target achievement as designated by Supervisor.Take part and contribute in toolbox talks.Demonstrate awareness of and promote company objectives, policies and procedures.Ensure that all procedures/paperwork is completed, kept up to date and signed off by the relevant person.Ensure all company policies surrounding, health & safety, quality requirements and housekeeping are met.Adheres to inspection criteria, policies and procedures without exception.Travel as and when required.Carry out other duties as and when business requirements dictate as may be reasonably expected by line manager.StrategicAble to understand, evaluate and apply technical informationAble to adeptly learn the context of a challenge and quickly integrate new skillsHas solutions and suggestions that are effective in addressing the problem at handQualifications:Qualification:Preferred time served apprenticeship or experience minimum or 4 years' experience in electrical work.DesirableDegree in electrical engineering.Experience:Working knowledge within an assembly & manufacturing environment including the preparation of componentsWorking knowledge (1 year ) within an electrical repair environment.Skill & Competencies:Computer literacy (including good command of Microsoft Office Excel, Word and Outlook).Ability to read and interpret engineering drawingsProficient in both written and spoken English2019-08-22 12:51:08 |
Apply Now |
CRM / CMMS technician
INR7"YEARLY"
CRM / CMMS TechnicianFull Time (5-10 Yrs )CRM / CMMS Technician
Asmacs |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20CRM / CMMS technicianJob Location : OmanJob Details :Qualification should be ITI/Diploma in Mechanical/ Electronics/ InstrumentationShould have minimum 5 years experience in Operation & maintenance, installation for STP equipments etc.5 years experience in equipment installation for STP/ RO plant and added advantage.Good knowledge of the process required.2019-08-22 12:50:49 |
Apply Now |
Divisional Manager - Tires, Batteries & Accessories
INR7"YEARLY"
Divisional Manager - Tires, Batteries & AccessoriesFull Time (0-10 Yrs )Global Management Solutions (GMS) |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
17-08-2019 2019-11-15Job DescriptionAllocate monthly targets (based on business plan) to team; Understand issues in branches such as low-sales, process compliance, administration issues etc; Conduct PDCA analysis; Intervene in areas related to process, audits, sales etc; Provide guidance and corrective actions to resolve issues; Coordinate with other functions to resolve bottle-necks; Assist branches in converting high-value prospects / deals; Collect data from market on market-ruling price; Provide feedback to Procurement on case-to-case basis; Negotiate prices with customers; Support team in closing deals in order to increase TBA sales to new and existing customers2019-08-17 12:27:47 |
Apply Now |
technician Aircraft intenance Third Party a Tech Support Oni
INR7"YEARLY"
Technician Aircraft intenance Third Party a Tech Support OniFull Time (1-10 Yrs )Oman Air |
Oman
Not Mentioned
oman
0oman
|
16-08-2019 2019-11-14-Responsible for provision of basic ground handling services to all Company and contracted parties as per maintenance requirements.-Ensure to follow instructions issued by Lead- Charge hand and carry out the work as required.-Ensure that all manuals and publications are maintained in good order and kept up to date to the last revision.-Ensure that all tools and equipment used are operated correctly, safely and maintained in good working condition, update tool list as per EPM.-Responsible for tool control of tool box in his possession report any missing tools as per EPM.-Record and maintain respective records for all maintenance work carried out.-Ensure-Perform Aircraft arrival and pre departure checks, walk around and carry out snag rectification as required by the Licensed Engineer attending the aircraft-Maintain a current permanent record of tools and equipment in accordance with procedure.-Assist in the training and development of Omani National staff placed under his control.-Report any unserviceability of equipment or tooling or occurrences, to his Charge hand.-Ensure adequate pre work preparation is carried out to ensure efficient work process.-Adhere to the Airport Authorities rules and company procedures and regulations.-Record all delays and incidence-accidents occurrence on the required forms and submit to the Lead charge hand or his deputy for his action to completion.-Adhere to the HSE-administration-disciplinary policies of the company.-Carry out Aircraft maintenance and rectification work as directed by immediately reporting personnels.-Undertake any other task as instructed by immediate Supervisor.-Ensure-responsible to keep tool box at allocated place after attending aircraft.-Responsible to maintain equipments clean by disposing off used items-FODs in the rubbish bins after attending allocated aircraft.
REQUIREMENTS:
-Two years college Diploma in Aircraft Maintenance engineering-OR EASA Certificate of Recognition in category B1.1-OR ICAO Type II LWTR-For Non Omanis any one of the above with 04 years experience as technician Aircraft.2019-08-16 16:06:39 |
Apply Now |
Hydraulic Design Engineer
INR7"YEARLY"
Hydraulic Design EngineerFull Time (2-5 Yrs )Renardet |
Muscat
,
Oman
Oman
0muscat
Oman
,
Not Mentioned
oman
0oman
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
13-08-2019 2019-11-11Renardet is looking for a Hydraulic Design Engineer for its branches located in Muscat (Oman) and Riyadh (Saudi Arabia)Expected starting date: as soon as possibleMinimum Qualifications Requirements:• BSc or MSc Degree in Civil or Environmental Engineering• 2-5 years experience in road drainage design, culvert sizing, bridge hydraulic analysis including scouring calculations• Experience with Autocad, Civil 3D, HEC-HMS, Aquaveo WSM , HEC-RAS (1D and 2D), HY-8, and Arcgis or other open source gis• Proficiency in English language• Strong technical, verbal, written and interpersonal skills2019-08-13 13:18:17 |
Apply Now |
Mechanical Grinder/ Helper
INR7"YEARLY"
Mechanical Grinder/ HelperFull Time (3-4 Yrs )Seagull International |
Oman
Not Mentioned
oman
0oman
|
12-08-2019 2019-11-10Job Location : Oman Good Salary will be Offered.Requirement : He shall be able to do mechanical grinding / technician job. Familiar with bolting / unbolting, work experience in refinery area Able to understand English. 10th or equivalent Min of 3-4 years experienceInterested Candidates Can Apply2019-08-12 15:53:09 |
Apply Now |
Avionic and Mechanical technician
INR7"YEARLY"
Avionic and Mechanical TechnicianFull Time (2-3 Yrs )Aeropeople Ltd |
Oman
Not Mentioned
oman
0oman
|
12-08-2019 2019-11-10technicians - Oman - Middle EastWould you like the opportunity to work on world renowned military aircraft, while maintaining a fantastic earning potential through an overseas position?Our customer is seeking to appoint a variety of experienced technicians, to join their operation based in Oman.tYou will hold, at least two years minimum on type and be able to work alone as well as part of a team.Hawk 208 Avionic technicianNH90 Avionic technician.NH90 Mechanical technicianNDT Level 3 technician2019-08-12 15:21:38 |
Apply Now |
Site Supervisor
INR7"YEARLY"
Site SupervisorFull Time (5-10 Yrs )Confidential Company |
Oman
Not Mentioned
oman
0oman
|
12-08-2019 2019-11-10The Supervisor is responsible for the management of the Regular Services Crew at the PDO site in Oman and is expected to make a significant contribution to the strategic management of the power stations covered under the Contract.The Supervisor is also responsible in directing the weekly operational checks of remote Power Plants covered under the Contract, daily plant maintenance and repair of plant facilities and equipment.This job is on a rotation basis, 3 months ON and 1 month OFF.Main Duties and Responsibilities;•Control of all site related matters relating to the successful hook-up, installation and commissioning of the gas turbine and auxiliaries, its Control System, HMI/EWS interface to DCS, off-base cables and supports systems and ensuring site operations are in line with the budget
•Supervise Field technicians and subcontractors for all site related issues
•Leads a team of multi-discipline Regular Services Crew (RSC) in conducting plant weekly operational checks on remote power stations
•Execute all site operations according to the company quality and HSE plans
•Promote Engineering quality control, ensuring conformity to appropriate Gas Turbine engineering specifications in order to meet all customer and company requirements
•Supply a high level of technical support to client base and engineering staff
•Compiling and timely submission of detailed field reports
•Any other appropriate tasks as assigned by the Senior Engineer
•To work safely and in accordance with all company Health, Safety and Environmental rules and recommendations, and be proactive in maintaining a safe working environment.2019-08-12 15:21:11 |
Apply Now |
Watch Repairing technician
INR7"YEARLY"
Watch Repairing TechnicianFull Time (3-5 Yrs )Resource Hunters |
Oman
Not Mentioned
oman
0oman
|
12-08-2019 2019-11-10Requirements :Have 3 years experience as Watch Repairing technicianShould be available in IndiaNote : Only shortlisted candidates will be contactedInterested candidate can apply with your updated resume.2019-08-12 15:21:07 |
Apply Now |
Electrical technician - Diesel Generators
INR7"YEARLY"
Electrical Technician - Diesel GeneratorsFull Time (5-10 Yrs )Voltech HR Services Pvt Ltd |
Oman
Not Mentioned
oman
0oman
|
12-08-2019 2019-11-10Requirements :Candidates with 5 Years of experience in related fieldInterested candidate can apply with your updated resume2019-08-12 15:21:00 |
Apply Now |
CRM / CMMS technician
INR7"YEARLY"
CRM / CMMS TechnicianFull Time (5-10 Yrs )Asmacs |
Oman
Not Mentioned
oman
0oman
|
12-08-2019 2019-11-10CRM / CMMS technicianJob Location : OmanJob Details :Qualification should be ITI/Diploma in Mechanical/ Electronics/ InstrumentationShould have minimum 5 years experience in Operation & maintenance, installation for STP equipments etc.5 years experience in equipment installation for STP/ RO plant and added advantage.Good knowledge of the process required.2019-08-12 15:20:59 |
Apply Now |
technician - Aircraft Maintenance
INR7"YEARLY"
Technician - Aircraft MaintenanceFull Time (2-3 Yrs )Oman Air |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
12-08-2019 2019-11-101. Responsible for provision of basic ground handling services to all Company and contracted parties as per maintenance requirements.2. Ensure to follow instructions issued by Lead/ Charge hand and carry out the work as required.3. Ensure that all manuals and publications are maintained in good order and kept up to date to the last revision.4. Ensure that all tools and equipment used are operated correctly, safely and maintained in good working condition, update tool list as per EPM.5. Responsible for tool control of tool box in his possession report any missing tools as per EPM.6. Record and maintain respective records for all maintenance work carried out.7. Ensure/Perform Aircraft arrival and pre departure checks, walk around and carry out snag rectification as required by the Licensed Engineer attending the aircraft8. Maintain a current permanent record of tools and equipment in accordance with procedure.9. Assist in the training and development of Omani National staff placed under his control.10. Report any unserviceability of equipment or tooling or occurrences, to his Charge hand.11. Ensure adequate pre work preparation is carried out to ensure efficient work process.12. Adhere to the Airport Authorities rules and company procedures and regulations.13. Record all delays and incidence/accidents occurrence on the required forms and submit to the Lead charge hand or his deputy for his action to completion.14. Adhere to the HSE/administration/disciplinary policies of the company.15. Carry out Aircraft maintenance and rectification work as directed by immediately reporting personnel s.16. Undertake any other task as instructed by immediate Supervisor.17. Ensure/responsible to keep tool box at allocated place after attending aircraft.18. Responsible to maintain equipment s clean by disposing off used items/FODs in the rubbish bins after attending allocated aircraft.2019-08-12 15:20:42 |
Apply Now |
Mechanical technician
INR7"YEARLY"
Mechanical TechnicianFull Time (1-10 Yrs )Sohar Aluminium |
Oman
Not Mentioned
oman
0oman
|
08-08-2019 2019-11-06-Action the SA Environment, Health & Safety (EHS) procedures to ensure safety and compliance-Continuously action the SA EHS Standard Operating Procedures (SOPs) including:-Wearing correct PPE-Applying the 5S principles; ensuring a clean and tidy work area-Maintaining the work areas, tool storages in a safe, efficient condition-Cleaning the equipment-Generating and closing equipment notifications-Use of job safe analysis tools-Actively participate in the daily safe-start meetings and the weekly safety meetings. Attend EHS training-Conserve resources (eg; small tools) to minimize waste-Know and apply the SA authorisation and isolation procedures, for example:-Inform the Supervisor immediately of any accidents or unforeseen problems-Be aware of the protected work areas and those who have authority to enter these areas-Attend incident report investigations-Repair and maintain the equipment to maximize operational reliability at the optimum cost. Troubleshoot problems-Perform work to Sohar Aluminums standard work procedures and practices, obey Plant and Department rules-Analyse risks, implement appropriate controls, commencing each task-Analyse, diagnose and correct equipment faults-Execute preventive and predictive maintenance to optimize availability and reliability and quickly return under-performing equipment to design specification-Action emergency breakdown repairs to minimize downtime-Input information to the SAP Plant Maintenance module (eg: create reservations/spending, raise requisitions to procure materials, create closure)-Operate and maintain equipment as per SOP, where applicable-Think about ways to improve practices and procedures. Recommend improvements to the leadership-Participate in CI Projects-Actively participate in training and development activities to enhance own development and to ensure a safe and productive workplace-Develop own skills and knowledge by reading, participating in HRD training activities and by practicing new skills-Coach others. Assist others to train new recruits-Know and apply the mobile equipment operating procedures to ensure safe, efficient production outcomes and to maximize the life of the equipment.-Learn to recognize the hazards associated with the operation of mobile equipment.-Take action to mitigate risk and ensure safe operation of the equipment-Conduct daily checks on the mobile equipment which is assigned for use. Refer standard checklist.-Check the operation, adjust, replace, repair, configure, calibrate and maintain the Area equipment to ensure its efficient operation and availability-Repair breakdowns-Carry out the preventive and predictive maintenance program (calibration, inspections, cleaning, adjustment)-Ensure high quality standards-Ability to read and understand the Hydraulic and pneumatic drawing and troubleshooting Hydraulic and Pneumatic systems.-Ability to work as Casthouse First Response shift technician and carry out all inspection and troubleshooting of equipment and write the details of the finding in SAP system.-Repair hydraulic and pneumatic components including cylinders, actuators, pumps, motors-Ensure high quality standards
REQUIREMENTS:
Diploma in Mechanical Engineering with 2 years of relevant experienceGeneric Skills:-English language: Good verbal English; the ability to read and understand technical documents in English-EHS: The capacity to learn and continuously execute the basic2 EHS policies and procedures which are required in a heavy industrial environment-SAP: Intermediate. The Job Holder is required to action transactions in the Plant Maintenance modules of SAP (eg: create reservations, raise requisitions to procure materials, create closure).-The Job Holder must also use the basic-SAP functions, including maintenance notifications and leave requests in SAP2019-08-08 16:13:56 |
Apply Now |
HVAC technician
INR7"YEARLY"
HVAC TechnicianFull Time (2-3 Yrs )W Muscat |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04The St. Regis brand first established luxury hospitality more than 110 years ago, with the opening of the St. Regis New York. From the moment John Jacob Astor IV opened the doors of his Beaux-Arts masterpiece on New York s Fifth Avenue, St. Regis has stood as a symbol of uncompromising elegance and bespoke service. Today, with more than 40 of the best addresses around the world, St. Regis is a place where trends are born, boundaries are broken and guests can simply live exquisite. We invite you to explore careers at St. Regis.Job SummaryInspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, and anticipate and address guests' service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Perform other reasonable job duties as requested by Supervisors.Marriott International is an equal opportunity employer committed to hiring a diverse workforce and sustaining an inclusive culture. Marriott International does not discriminate on the basis of disability, veteran status or any other basis protected under federal, state or local laws.2019-08-06 16:43:21 |
Apply Now |
Architectural technician
INR7"YEARLY"
Architectural TechnicianFull Time (5-10 Yrs )Propel consult |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-041.Totally Proficient in the use and application ofAutoCAD (X-Refs, Blocks, Layers, 3D Modeling, Etc), Revit, Photoshop and InDesign
2. Team Player
3. Capable of working under pressure to get the job done.
4. Capable of accepting instructions and directions and in processing them accordingly.
5.Technically competent with constrution detailing/shop drawings.
6. Excellent high quality draughting skills, fully knowledge of standard norms.
7. highly efficient in their work and in production of drawings.
8. Keen eye to detail.
9. Excellent time management.
10. Excellent commitment.
11. Excellent presentation skills.2019-08-06 16:43:20 |
Apply Now |
Manager - Cabin Maintenance.Line Maintenance MCC
INR7"YEARLY"
Manager - Cabin Maintenance.Line Maintenance MCCFull Time (3-4 Yrs )Oman Air |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Cabin Maintenance Manager s main duties and responsibilities are mentioned but not limited to the below:1. Responsible for planning, organizing, maintaining all Base & Line related activities with regards to Cabin Maintenance.2. Ensure that all Cabin Engineers and technicians in line and at base have flights allocated in their shifts to inspect and rectify the cabin defects on daily basis upon each arrival with appropriate shift handover and take over.3. Ensure aircraft Interiors and Exteriors appearance in maintained to the highest standard of quality and maintainability.4. Develop plans and policies to provide optimum maintenance and ensure that required facilities, tooling, materials and associated resources are available for all scheduled and anticipated work.5. Ensure that all maintenance including defect rectification, in Line Maintenance Division, is made in accordance with the approved maintenance data and tools/equipment are maintained/calibrated as per organizational procedures and standards acceptable to the Competent Authority.6. Manage all the resources and information flow in order to ensure a timely rectification of repetitive and carried forward aircraft defects keeping at all times a focus on safe and economic operations of the fleet.7. Conduct review meetings on regular basis with sectional staff to plan activities and create preventive measure to ensure smooth operations.8. Report any case of an un-airworthy condition or a deviation from Standard Operating Procedures to Quality Assurance.9. Prepare the monthly summary of the Cabin Maintenance department on defect rectifications, deferred defects, fumigation & aircraft exterior wash and share the dash board with the Senior Manager.10. Ensure all delays pertaining to Cabin Maintenance are duly reported to the Senior Manager with justification and action taken on daily basis.11. Ensure/Inspect and maintain complete list of updated records of technician s toolbox lists with ref to EPM tool control procedures.12. Ensure strict control of overtime of the section for corrective and cost preventative results.13. Ensure timely and constant update on any other duties assigned by the Senior Manager CA&HS.2019-08-06 16:43:16 |
Apply Now |
Road Design Engineer
INR7"YEARLY"
Road Design EngineerFull Time (2-5 Yrs )Renardet |
Muscat
,
Oman
Oman
0muscat
Oman
,
Not Mentioned
oman
0oman
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
06-08-2019 2019-11-04Renardet is looking for a Road Design Engineer for its branches located in Muscat (Oman) and Riyadh (Saudi Arabia)Minimum Qualifications Requirements:• BSc or MSc Degree in Civil or Environmental Engineering• 2-5 years experience in road drainage design, culvert sizing, bridge hydraulic analysis including scouring calculations• Experience with Autocad, Civil 3D, HEC-HMS, Aquaveo WSM , HEC-RAS (1D and 2D), HY-8, and Arcgis or other open source gis• Proficiency in English language• Strong technical, verbal, written and interpersonal skills2019-08-06 16:43:14 |
Apply Now |
Electrical technician
INR7"YEARLY"
Electrical TechnicianFull Time (2-3 Yrs )Gulf Genuine Power Co. LLC |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Condition monitoring i.e ThermographyShould have ASNT Thermography certification2019-08-06 16:43:10 |
Apply Now |
Electrical Repair technician (Omani Nationals Only)
INR7"YEARLY"
Electrical Repair Technician (Omani Nationals Only)Full Time (1-2 Yrs )NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04JOB PURPOSEAs Repair technician (Electrical) you will be responsible for reading and interpreting Electrical drawings, positioning parts for assembly as well as performing dis-assembly and assembly of electrical components, reporting quality issues of the day-to-day assembly and fitting of the full range of NOV Rig's product line. You will support, improve and lead on-time repair of products through specific techniques as well as innovative idea generation and creative, efficient problem solving. Your existing knowledge of best electrical practices.DUTIES & RESPONSIBILITIES:Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and productsCarry out work instructions as given by Supervisor, e.g. work specifications, equipment operation.Monitor and control materials, products or equipment to detect defects or faults.Identify product defects and complete appropriate documentation when defects are identifiedRework and/or repair assembled equipment and products according to engineering specification changesMaintain quality and quantity of production.Check work via use of electrical test equipment.Support key initiatives such as on time delivery, schedule attainment, cost of qualityGenerate and implement improvement ideas and encourage idea generation among team members and stop work for safety, stop production for quality, and escalate concernsBe familiar with and use of proactive root cause problem solving (Fishbone etc.)Support all NCR reporting.Attend team brief meetings, actively engaging in positive discussions regarding potential problematic areas.Accurately describe events during quality related investigations, aiding the Supervisor to understand the root cause where required.Willingly assist Supervisor to eradicate identified potential areas of non-conformance.Respond to identified process improvements and implement them willingly.Report discrepancies in job route times as soon as they are identified. Communicate them to the Supervisor and implement changes when requested.Action all tasks assigned to maintain high levels of target achievement as designated by Supervisor.Take part and contribute in toolbox talks.Demonstrate awareness of and promote company objectives, policies and procedures.Ensure that all procedures/paperwork is completed, kept up to date and signed off by the relevant person.Ensure all company policies surrounding, health & safety, quality requirements and housekeeping are met.Adheres to inspection criteria, policies and procedures without exception.Travel as and when required.Carry out other duties as and when business requirements dictate as may be reasonably expected by line manager.StrategicAble to understand, evaluate and apply technical informationAble to adeptly learn the context of a challenge and quickly integrate new skillsHas solutions and suggestions that are effective in addressing the problem at handQualifications:Qualification:Preferred time served apprenticeship or experience minimum or 4 years' experience in electrical work.DesirableDegree in electrical engineering.Experience:Working knowledge within an assembly & manufacturing environment including the preparation of componentsWorking knowledge (1 year ) within an electrical repair environment.Skill & Competencies:Computer literacy (including good command of Microsoft Office Excel, Word and Outlook).Ability to read and interpret engineering drawingsProficient in both written and spoken English2019-08-06 16:43:09 |
Apply Now |
Workshop repair technician (Omani Only)
INR7"YEARLY"
Workshop repair Technician (Omani Only)Full Time (2-4 Yrs )NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Job Summary:Positions, reworks, fits and welds according to written and typed instructions, blueprints, factory specifications and knowledge of characteristics of metal. Selects equipment and plans layout, fabrication, assembly and welding.Responsibilities:Lay out, positions, aligns and fits components together using applicable machines, tools and equipment.Bolt, clamp and tack-weld parts to secure them in position for final weldingSet up and weld parts using welding equipmentFollow written and typed instructions and manufacturer's specifications.Must be able to write legibly, and know how to setup, operate and maintain welding equipment and associated toolsTo use hand tools and be able to correctly setup and operate applicable shop machinesMust be able to perform work with minimum supervision and exercise individual initiative and judgmentTo perform Tig and oxy-acetylene welding, cutting and brazing on various ferrous and nonferrous metals, in accordance with established factory methods and proceduresMaintain repair and production documentation as per required procedure.Perform other work related task as required as assignedComply with all NOV Company and HSE procedures and policiesFacility Specific:Carryout welding as per the approved procedure and work orderRecord all process parametersFollow work instructions and procedures.Notify non conformances and unsafe conditions.Follow Safety rules and regulationsQualifications:Qualifications / Requirements:High school, ITI, diploma or equivalent (welding certification)Meet NOV welding certification2019-08-06 16:43:09 |
Apply Now |
iPhone/ Apple phone technician
INR7"YEARLY"
iPhone/ Apple phone TechnicianFull Time (3-8 Yrs )Modern Memory LLC |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04•Detecting issues, listen to customers’ description of phone problem, running tests, replacing parts, and reporting repairs to managers and manufacturers.
•Provided optimal customer services and managed work in fast pace environment
•Administered all paperwork and keep inventory of merchandise and order part new parts
•Tested repaired units and advised clients when they could retrieve their units
•Changing Power IC, charge IC, repair the motherboards; repair iPhone latest models like iPhone 7, 8, 10.
•Checking antenna, battery, LCD screens, keypads, buttons, camera, etc; may require replacing.
•Run a few tests and carefully assess the device's functionality before opening it up.
•Disassemble, test, and replace defective parts.
•Reassemble complete device.
•Support productivity by ensuring all request are handled in a timely manner.
•Have the ability to work unsupervised while prioritizing and delivering timely, high quality work.2019-08-06 16:43:09 |
Apply Now |
Electrical technician - Diesel Generators
INR7"YEARLY"
Electrical Technician - Diesel GeneratorsFull Time (5-10 Yrs )Voltech HR Services Pvt Ltd |
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Electrical technician - Diesel GeneratorsJob Location : OmanSalary : 150 OMR + OTFree : Food, Accommodation and TransportationRequirements : Candidates with 5 + Years of experience in related fieldInterested candidate can apply with your updated resume2019-08-06 15:58:56 |
Apply Now |
Operation Artificial Lift technician (Exp. 5+ yrs.)
INR7"YEARLY"
Operation Artificial Lift Technician (Exp. 5+ yrs.)Full Time (5-6 Yrs )Client of Sofomation |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
01-08-2019 2019-10-30Job DetailsJob TitleOperation Artificial Lift technicianIndustryOil & GasMain Function Areatechnician & TradesSub Function AreaProduction Field OperatorWork LocationMuscat, OmanCandidateProfileJob Description2 year degree5+ years experience working in industry with artificial lift pumpsFluent in speaking and writing in English language (able to write technical reports, programs, and contractual technical specifications)Demonstrated ability of Mentoring and training young engineersStrong knowledge of industry standardsComputer literate in Microsoft products: excel, word, PowerPointSolid understanding of HSE, and Permit to Work, Job Safety Assessment, and Haz-op & Haz-IDWork Experience5Years+Relevant Experience5Years+Highest Qualification2 year degreeJob SummaryWill be responsible for the troubleshooting, commissioning, and daily operating of the artificial lift pumps; PCP & ESPMaintain a database of the types of pumps and the operations parameters of the pumps on a daily basisCoordinate with the Production operations, Well intervention, drilling and subsurface teams on the daily operation of the pumpsEstablish and perform analysis on Mean Time between Failure of theartificial lift pumpsWrite the technical specifications/Scope of Work documents required for contracts for artificial lift pumps and serviceWrite and update Standard Operating ProceduresTrain and Mentor the Field Operators on the daily safety checks, and maintenance of the pumpsThis is a field based position and the individual will be working 12 hours/day on a rotation 14/14 or 28/28 rotational assignmentContact DetailsSend your CV s @jobs@sofomation.com2019-08-01 13:01:51 |
Apply Now |
Divisional Manager - Tires, Batteries & Accessories
INR7"YEARLY"
Divisional Manager - Tires, Batteries & AccessoriesFull Time (0-10 Yrs )Global Management Solutions (GMS) |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
31-07-2019 2019-10-29Job DescriptionAllocate monthly targets (based on business plan) to team; Understand issues in branches such as low-sales, process compliance, administration issues etc; Conduct PDCA analysis; Intervene in areas related to process, audits, sales etc; Provide guidance and corrective actions to resolve issues; Coordinate with other functions to resolve bottle-necks; Assist branches in converting high-value prospects / deals; Collect data from market on market-ruling price; Provide feedback to Procurement on case-to-case basis; Negotiate prices with customers; Support team in closing deals in order to increase TBA sales to new and existing customers2019-07-31 16:51:30 |
Apply Now |
Hydraulic Design Engineer
INR7"YEARLY"
Hydraulic Design EngineerFull Time (2-5 Yrs )Renardet |
Muscat
,
Oman
Oman
0muscat
Oman
,
Not Mentioned
oman
0oman
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
27-07-2019 2019-10-25Renardet is looking for a Hydraulic Design Engineer for its branches located in Muscat (Oman) and Riyadh (Saudi Arabia)Expected starting date: as soon as possibleMinimum Qualifications Requirements:• BSc or MSc Degree in Civil or Environmental Engineering• 2-5 years experience in road drainage design, culvert sizing, bridge hydraulic analysis including scouring calculations• Experience with Autocad, Civil 3D, HEC-HMS, Aquaveo WSM , HEC-RAS (1D and 2D), HY-8, and Arcgis or other open source gis• Proficiency in English language• Strong technical, verbal, written and interpersonal skills2019-07-27 15:18:25 |
Apply Now |
IT technician
INR7"YEARLY"
IT TECHNICIANFull Time (3-5 Yrs )Client of Al Sofi Manpower Consultant |
Oman
Not Mentioned
oman
0oman
|
27-07-2019 2019-10-25Good knowledge in a. IP CCTV Camera, NVR, VMS, ANPR, Video Analytics, NAS, SAN etc. b. Access control and attendance system, AC software modules and integration. c. Gate automation Boom barriers, turnstiles, sliding gates and its integration with ACS or BMS d. PA/BG system (IP/Digital) e. Networking (switching, routing, WLAN managed wifi, VLANs, VPN etc.) f. Firewalls, UTM and QoS policies, Authentication Methods etc. g. IT hardware, Servers, Workstations, Microsoft products configuration, activation and maintenance. 3. Good knowledge and experience in designing and implementing Passive network, structured cabling solution, Optical Fibre Network, FTTH etc. 4. Experience in working with brands like of Cisco, Nortel, Allied Telesys, Extreme, Fortiget, Netgear, Checkpoint, Watch guard, Cyberoam, Motorola, Juniper, Aruba, HPE, SonicWALL, Avaya, AMP, Systemax, Belden, Honeywell, Bosch, Axis, Pelco etc. 5. Hands on experience in Implementing Networking, IP CCTV, ELV, IT projects on site, managing technicians and labors.2019-07-27 15:17:43 |
Apply Now |
Mobile/Laptop Fixing and Repair technician
INR7"YEARLY"
Mobile/Laptop Fixing and Repair TechnicianFull Time (3-4 Yrs )Leamra technology |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
27-07-2019 2019-10-25Applicant interested in this position should have the following minimum qualification> Good experience in analyzing and fixing all laptops/pc hardware for all brands including software installation and configuration.
> Good experience in analyzing and fixing all types of mobile (android & IOS) for famous brans specially Samsung, Huawei & iPhone.
> preferred with valid driving license and fluent in English, prefer Arabic language.2019-07-27 15:17:19 |
Apply Now |
Associate Specialist - Services Programs
INR7"YEARLY"
Associate Specialist - Services ProgramsFull Time (1-10 Yrs )General Electric (GE) |
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Role Summary:Leading, EHS wise, a team responsible for day-to-day operations and maintenance activities at wind farm facility. This includes the development, planning and implementation of Environmental Health and Safety programs & policies as per the GE guidelines and industry best practices. This EHS coordinator position will function in a team which includes other members of plant level staff, technicians to ensure EHS compliance and strengthen our Wind Turbine Service and Maintenance team in OmanEssential Responsibilities:Ensure compliance of wind power plant operations with regulatory requirements relating to air, solid & hazardous waste, chemical, water, oil, greases, working at height, confined space and environmental health and safety.. Provide proactive leadership on all EHS and medical issues.. Create and run training sessions, refreshers for site personnel. Create and grow safety culture at assigned project. Implement / modify EHS programs and procedures to ensure company compliance and customer expectations. Maintain an in-depth knowledge of applicable Omani regulatory requirements. Modify and implement compliance tracking programs and record keeping systems. Provide and determine alternatives for issue resolution. Develop and work with site teams focused on EHS program development, implementation and improvementDrive accountability with all functions and associates to aggressively reduce accident and injuries.. Able to carry out risk, safety and hazard analysis.Apply ergonomic principles to improve workstations and minimize injuries.Develop and maintain excellent local and state agency relationships. Ability to work independently on the implementation of fault analyses and repair of wind turbine generator systems, including clarification of any client queries.. Planned and preventive maintenance of wind turbine generator systems.. Documenting of call-out responses, fault finding and repair work in service reports, logbooks and checklists. Management and documentation of corporate processes and IT-applications. Briefing/induction of external service provider and suppliers on site. Work for the continuous improvement of products and processes. Assistance of the technical leader of the area. Support in the development of training concepts
REQUIREMENTS:
Qualifications/REQUIREMENTS:. Degree in HSE from an accredited university or equivalent e.g. Nebosh; Occupational Health, Industrial Hygiene, Root Cause Analysis, Machine Safety, Law and Regulations, Chemical Safety, Manual Handling, Risk analysis, Fire Safety, Noise and Vibrations) or equivalent knowledge or experience or professional training in electrical, mechanical, mechatronics engineering (Engineer or Diploma certificate).3 years experience leading environmental and safety compliance programs in a power plant environment. Proven experience with exposure to several EHS areas in the field environment. Great knowledge in local (Omani) EHS legislation. Medical fitness and willingness for work at height (Basic Safety Training would be a plus). Fluency in English, oral and written communication, presentation, training, and negotiation skills. Strong oral and written communication skills and strong interpersonal and leadership skills. Have a high energy level and the ability to energize others. Team player with strong interpersonal skills, capable of working within a diverse team. Ability to interface effectively with all levels within the company as well as organizations outside GE (regulatory agencies)Demonstrated knowledge of EHS and government regulations.Advanced computer skills and familiar with MS-Office(word, excel, ppt etc.).. Able to work at heights and high level of physical fitness.. Willing to work sometimes also at the weekends.. Valid Omani Driving licence. Social skills and ability to motivate staff and performance assessment. technician or minimum 3 years practical experience in the power sectorDesired Characteristics:. NEBOSH qualified or regional EHS qualifications with proven experience in power generation sector/Oil and Gas/ FMCG/ Fertilizer sector etc.. Professional EHS certifications .Experience managing projects and/or EHS complianceTeam player with strong interpersonal skills. Electrical/ mechanical service or maintenance experience and willingness to work in troubleshooting of wind turbines will be an additional advantage.2019-08-06 21:02:14 |
Apply Now |
