Senior Instrumentation and Control Engineer
Senior Instrumentation and Control Engineer (8-14 Yrs )MPH CONSULTING SERVICES DMCC |
Dubai
,
United Arab Emirates
United Arab Emirates
United Arab Emirates
Not Mentioned
United Arab Emirates
|
23-04-2018We are looking for Senior Instrumentation and Control Engineer for UAE.Job Role & Responsibilities: •Preparation of all engineering deliverables •Preparation of design basis, philosophies, instrument selection, studies/reports and recommendations.•Understanding of Engineering and design for DCS/ESD/PLC/F&G systems, RTU/SCADA system.•Preparation of various specifications & data sheets for field instruments, analysers, ESD valves, motor operated valves.•Preparation of MR, technical bid evaluation, recommendation & Vendor drawing review.•Review of drawings prepared by the designer2018-04-23 14:53:38 |
INSTRUMENTATION ENGINEER
INSTRUMENTATION ENGINEER (5-10 Yrs )Client of BAC Middle East |
Dubai
,
United Arab Emirates
United Arab Emirates
United Arab Emirates
Not Mentioned
United Arab Emirates
|
03-04-2018On behalf of our client a leading E&P oil and gas company based in Dubai we are looking to recruit an Instrument Engineer. Reporting to the Senior Instrument Engineer you will be responsible for supporting all the company's offshore assets, instrumentation control, safeguard and condition monitoring systems to improve the instrumentation and controls overall reliability, provide technical advice to determine best practices in the field of reliability and the most appropriate work methods to prevent repeat failures and where assigned an upgrade project be the onshore single point of contact for the upgrade and modification activities including the ordering of equipment's and planning for pre- work, pre- commissioning and then final commissioning.
The successful candidate must have completed their secondary education followed by 3 years Diploma in Electrical/Instruments or Electronic training and qualifications ( equivalent to C&G/NVQ/ONC UK) Have 10 years operation/maintenance support to the Offshore oil and gas control and instrumentation installations, leadership experience and skills in guiding and leading control and instrumentation technicians in installation and commissioning activity at offshore installation, experience of the following systems Field Instrumentation and Devices DCS Systems PLC controls PLC-% and RSLogix 5000 Pneumatic Controls Turbine and Compressor/Pump Controls Rolls Royce/Solar/Dresser Vibration Monitoring Systems Gas Compressor Surge Control Systems Fire and Gas ESD Systems Control and Shutdown vales Plant Information Management System2018-04-03 16:23:47 |
Instrumentation Engineer
Instrumentation Engineer (1-10 Yrs )BAC Middle East |
Dubai
,
United Arab Emirates
United Arab Emirates
UAE
Not Mentioned
UAE
|
03-04-2018The successful candidate must have completed their secondary education followed by 3 years Diploma in Electrical/Instruments or Electronic training and qualifications ( equivalent to C&G/NVQ/ONC UK) Have 10 years operation/maintenance support to the Offshore oil and gas control and instrumentation installations, leadership experience and skills in guiding and leading control and instrumentation technicians in installation and commissioning activity at offshore installation, experience of the following systems Field Instrumentation and Devices DCS Systems PLC controls PLC-% and RSLogix 5000 Pneumatic Controls Turbine and Compressor/Pump Controls Rolls Royce/Solar/Dresser Vibration Monitoring Systems Gas Compressor Surge Control Systems Fire and Gas ESD Systems Control and Shutdown vales Plant Information Management System2018-04-03 14:40:03 |
Maintenance Technician - Instrumentation
Maintenance Technician - Instrumentation (4-8 Yrs )Emirates Global Aluminium |
dubai
,
United Arab Emirates
United Arab Emirates
united arab emirates
Not Mentioned
united arab emirates
|
03-04-2018Trouble-shoots, repairs, re-commission and maintains efficiently a wide range of machinery and equipment to ensure efficient operation and reduces production down time without compromising EHS Guidelines with a focus on continuous improvement.
Attends to all instrument & control equipment breakdowns and planned/ preventive/ predictive maintenance work with minimum direction and supervision within the time constraint given minimizing production downtime.
Identifies and reports any abnormalities. Repairs and /or replaces parts required, re-assembles and tests the equipment, leaving the working area clean.
Technically assesses the requirement of allocated jobs and selects the necessary tools to complete such work.
Effectively diagnoses, troubleshoots, report instrument & control system breakdowns/failures.
Provides guidance to other disciplines in the repair and troubleshooting of failed equipment
Using the computerized maintenance system (SAP), orders the spare parts from warehouse and maintains records of all maintenance work completed.
Ensures that all maintenance work is carried out in accordance with the safety procedures, maintenance plans and plant operational requirements.
Monitors any repeated breakdowns and recommends/takes up proper modification to resolve the problem2018-04-03 14:24:14 |
Instrumentation Engineer
Instrumentation Engineer (2-6 Yrs )Jasubhai Engineering Pvt Ltd |
Dubai
,
United Arab Emirates
United Arab Emirates
UAE
Not Mentioned
UAE
|
02-04-2018ROLES & RESPONSIBILITIES: Work shall start from the day RFQ/Enquiry is received from the customers. Single point contact for all filed instrumentation related activities and support to sales team and execution team. Making data sheets of instruments.Getting quotes from vendors for instruments and doing technical evaluation.Making technical and commercial proposals for field instrumentation. Providing the required solutions to customer and then supporting in answering the TQWs.Execution of the orders by procurement and supply of instruments Reporting: Reporting to Project Manager  Systems2018-04-02 19:16:13 |
Design Engineer - Instrumentation & Control
Design Engineer - Instrumentation & Control (4-8 Yrs )Larsen and Toubro limited |
Dubai
,
United Arab Emirates
United Arab Emirates
UAE
,
Not Mentioned
UAE
Qatar
Not Mentioned
Qatar
|
02-04-2018Incumbent should have hands on experience / exposure to basic and detailed engineering of Instrumentation, control & Automation works covering PLC/DCS, SCADA systems, field instruments , control & signal cabling, instrument hook up, control vale sizing, technical evaluation of Vendor offers , interfacing with electrical etc. as per the treatment process requirement in desalination ,water & effluent treatment and reuse plants.He should be proficient in selection of material of construction, sizing & type of instrumentation and using various international design codes and standards, should be innovative and able to adopt cost effective design. He should have experience of working in EPC / consultancy organization. Design experience in water treatment sector in GCC countries will be preferred.2018-04-02 19:16:03 |
Instrumentation Technician
Instrumentation Technician (1-10 Yrs )BAC Middle East |
Dubai
United Arab Emirates
United Arab Emirates
|
02-04-2018On behalf of our client a leading local oil and gas company, we are looking to recruit a Instrumentation Technician. Reporting to the Workshop Supervisor you will be responsible for carrying out repairs, fault finding and maintenance of all electronic and pneumatic control equipment, process transmitters, control valves, safety vales, shut down switches, vibration probes and power supplies.RequirementsThe successful candidate must be a resident of the UAE, have 5 years electronic instrumentation maintenance experience with a diploma or degree in electronics or control systems. Be proficient with MS office and fluent in all areas of English.2018-04-02 17:43:54 |
Senior Control and Instrumentation Engineer
Senior Control and Instrumentation Engineer (Fresher )Fircroft |
Dubai
United Arab Emirates
United Arab Emirates
|
02-04-2018In order to fulfil the Senior CandI Engineer duties you will have the following:
- Degree or relevant industrial experience in Electrical Engineering or Controls Engineering
- Working knowledge of Honeywell, Emerson and Invensys equipment
- Knowledge and experience in Sour Gas and Onshore Gas Projects
- Chartered status or working towards Chartered status would be an advantage
The successful candidate can expect a generous salary and the opportunity to join and develop within a market leading business in the Oil and Gas industry.2018-04-02 17:34:52 |
Lead Engineer- Instrumentation & Automation
Lead Engineer- Instrumentation & Automation (12-25 Yrs )Kentz Management Ltd. |
Dubai
,
United Arab Emirates
United Arab Emirates
United Arab Emirates
Not Mentioned
United Arab Emirates
|
02-04-2018Due to growth and expansion, we are currently looking for a Lead Engineer- Instrumentation and Automation to be based in Dubai for work in Iraq for an international oil company.
Responsibilities
Prepare verbal or written reports as required, stating the current workload in the group and whether it will meet set targets. If not, give the reasons why not and list the steps taken, or which need to be taken, to get back on target.
Liaise closely with the various Project Engineers for whom the group is doing work. This will enable the latest developments, which may affect the schedule to be ascertained. Advise them of problem areas.
Make sure that all the information needed by engineers to perform their work is available before they need it so that work progresses at a smooth and steady pace, on time and on target.
Ensure that work done in the discipline is accurate and correct.
Provide Employee Assessments on their performance of the various Engineers/Designers during contract renewal.
Ensure that any necessary reference material is readily available to Engineers whether it is a National or Client Standard, Procedure or recognised Code of Practice. Also, ensure that the most commonly used vendor literature is available.
Allocate work packages to suitable Engineers, monitor progress against the schedule, resolve queries and generally expedite the progress of the design.
Liaise with Engineering Manager with respect to resources and equipment requirements needed for the discipline to complete the work.
Ensure that the discipline Engineering work is performed based on correct Engineering standards.
Ensure work performed within the discipline is executed within the allocated man-hours.
Confident in Engineering ability and experience to handle queries and problems as they arise.
Able to grasp the important facts in a project and to create a schedule of work for the discipline Engineers which gets the work done on schedule and within the man-hours.
Aware of the strengths and weaknesses of the group discipline Engineers, allocate work accordingly, provide tuition to address the weaknesses and generally promote greater expertise within the group.
Able to act as a Lead Engineer on a large scale project.
Able to assess Value Engineering and Constructability issues.
Key Benefits
Well supported by this global engineering and construction organisation.
Long term rewarding career on offer.
Excellent salary package with benefits.
On-going professional and personal development.
Gain valuable experience on major resource projects.2018-04-02 17:18:04 |
Sales Manager Process Analytics or Automation / Instrumentation
Sales Manager Process Analytics or Automation / Instrumentation (Fresher )BAC Middle East |
Dubai
United Arab Emirates
United Arab Emirates
|
02-04-2018EDUCATION & EXPERIENCE:
Bachelors degree in engineering or equivalent work experience.
5-7 years experience in a similar position preferable in the process automations/instrumentation/analytics industry (or similar).
Accomplished negotiator
Five plus years of proven managerial experience
Experience within a global organization preferred.
KNOWLEDGE & SKILLS:
Broad minded strategic thinker with proven integrity
Proven background in business process improvement
Previous ability to successfully interact with customers
Strong leadership qualifications
Proficiency with computer tools, including ERP applications
LANGUAGE SKILLS
Excellent oral, written, verbal interpersonal and presentation communication skills in national language and English language.
WORK SKILLS
Solid working knowledge of the region and industry
Excellent project management, analytical, and organizational skills
Extensive travel required (up to 50%)2018-04-02 17:07:06 |
QC Electrical & Instrumentation Engineer.
QC Electrical & Instrumentation Engineer. (0-5 Yrs )Spectrum International Consultant |
Dubai
,
United Arab Emirates
United Arab Emirates
UAE
Not Mentioned
UAE
|
02-04-2018Preparation of E & I quality plans and testing procedures. Inspection of cable trays, cables, valves, instruments & lightings installation. Inspection & documentation of electrical & instrumentation works2018-04-02 15:51:39 |
Instrumentation Technician (Automation)
Instrumentation Technician (Automation) (0-3 Yrs )GD Consultant Groups |
Dubai
,
United Arab Emirates
United Arab Emirates
UAE
Not Mentioned
UAE
|
02-04-2018* Troubleshoot, Check, Repair automation related problems on board, AVR's excitation system, Power management, load sharing of Generators.* Repair of PCB and electronic equipments.* Ensure Safety & Quality.2018-04-02 15:29:18 |
Instrumentation Engineer
Instrumentation Engineer (5-10 Yrs )Brunel Energy |
Dubai
,
United Arab Emirates
United Arab Emirates
United Arab Emirates
Not Mentioned
United Arab Emirates
|
02-04-2018Design, calculations and identification of control systems including pneumatic and hydraulic for new build projects.Preparing documents and drawings for classification society and client. Provide engineering support for major conversion projects and yard activities. Support project tenders by estimating and preparing MTO.
1. Identification, selection and design of control systems for projects, as required
2.Undertaking design verification and calculations, as required
3.Generation of system block diagrams, circuit diagrams, I / O Lists etc.
4.Preparation of documentation for class and statutory bodies
5.Witnessing factory acceptance tests and attending dock trials and sea trials
6.Participating in design reviews and taking necessary follow up actions
7.Follow up with trades and carry out Inspections during vessel construction
8.Writing technical specifications for shipboard equipment
9.Perform other job related duties as assigned by the section head.2018-04-02 14:10:45 |
Prinicipal Engineer - Instrumentation
Prinicipal Engineer - Instrumentation (15-20 Yrs )Pyramid E&C |
Dubai
,
United Arab Emirates
United Arab Emirates
United Arab Emirates
Not Mentioned
United Arab Emirates
|
02-04-2018Specification of DCS/ PLC based control systems
Selection and Specification of field instruments.
Instrumentation Detailed Engineering in 2D/3D environment
Approval of installation design & MTO
Technical Bid Evaluation
Plant Commissioning and Trouble shooting2018-04-02 13:59:28 |
Principal Engineer - Instrumentation & Control
Principal Engineer - Instrumentation & Control (15-25 Yrs )Pyramid Consulting Engineers Pvt Ltd |
Dubai
,
United Arab Emirates
United Arab Emirates
United Arab Emirates
Not Mentioned
United Arab Emirates
|
02-04-2018Specification of DCS/ PLC based control systems
Selection and Specification of field instruments.
Instrumentation Detailed Engineering in 2D/3D environment
Approval of installation design & MTO
Technical Bid Evaluation
Plant Commissioning and Trouble shooting
Should have experience in process control philosophy2018-04-02 13:44:18 |
Instrumentation estimation engineer
Instrumentation estimation engineer (4-9 Yrs )CONSILIUM MIDDLE EAST. |
Dubai
,
United Arab Emirates
United Arab Emirates
United Arab Emirates
Not Mentioned
United Arab Emirates
|
02-04-2018Electronics field having 4-5 years of experience in Preparation & Compilation of Tender documents for Submission, Preparation ofTender BOQ/MTO as per the requirement which includes Bulk Materials, Designing of JB/Instrument Location Drawing,Preparation of Instrument cable schedule, Design of Fire Alarm/CCTV/ ESD/PA System, Vendor/Clientcorrespondence. Salary shall be best in the industry based on the experience.2018-04-02 13:40:19 |
Instrumentation Engineer
Instrumentation Engineer (0-10 Yrs )Manav Corporate Consultants |
Dubai
,
United Arab Emirates
United Arab Emirates
UAE
Not Mentioned
UAE
|
02-04-20181) Experience in major oil/gas/petrochemical/refinery projects in the capacity of lead/principal Control/Instruiment Engineer with Engineering Contractor/Consultant organization.2) Fully familiar with international codes, standards and recommended practices to be adopted during FEED & EPC phases of oil/gas projects. thorough knowledge of ICE & DCS & SCADA systems.3) Familiarity with subsystems such as fire and gas, emergency shut down systems etc and advance process controls.2018-04-02 13:02:50 |
Senior Instrumentation Testing, Commissioning & Start-up Engineer
Senior Instrumentation Testing, Commissioning & Start-up Engineer (0-15 Yrs )Alloys Consulting Pvt Ltd |
Dubai
,
United Arab Emirates
United Arab Emirates
UAE
,
Not Mentioned
UAE
Saudi Arabia
Not Mentioned
Saudi Arabia
|
02-04-2018Senior Instrumentation Testing, Commissioning & Start&up Engineer:Dubai/UAENew Gas Plant Commissioning3&Month / 20&days15&Years2018-04-02 12:05:35 |
Electrical & Instrumentation Engineer
Electrical & Instrumentation Engineer (6-8 Yrs )Al Qabas Employment Services |
Dubai
,
United Arab Emirates
United Arab Emirates
United Arab Emirates
Not Mentioned
United Arab Emirates
|
02-04-2018We are looking for a Electrical & Instrumentation Engineer with a leading Oil & Gas Company based in Duabi.
We only prefer candidates from UAE.
Shall design Electrical, Fire & Gas, Telecom system for offshore living quarters, oil field camps & modular buildings.
Design of motor control centres, power distribution boards, lighting distribution boards, control panels etc.
Knowledge of various standards like IEC, IEEE, NFPA, BSI, DNV etc.2018-04-02 11:14:04 |
Instrumentation Engineer
Instrumentation Engineer (5-8 Yrs )McDermott |
Dubai
,
United Arab Emirates
United Arab Emirates
United Arab Emirates
Not Mentioned
United Arab Emirates
|
02-04-2018Familiar with scope of work, monitor scope change and raise change notifications.
Performs detail engineering and design/calculations. Initiates and reviews material lists, P&ID etc for Electrical & Instrument equipment / systems and services for detailing scope including for F&G and Telecomm. Systems.
Prepares / updates specifications and data sheets for Electrical, Instrument, F&G and Telecommunication equipment and bulk materials.
Initiates inquiry and purchase order requisitions, evaluates quotations, prepares bid tabulations and recommendations.
Reviews and approves vendor documentation.
Carries out single and multi-discipline checks on other discipline deliverables.
Provides technical directions and inputs to design drafting personnel.
Performs electrical system study / calculation, participation in HAZOP and SIL study.
Provides bid engineering support, estimation of engineering man-hours etc.
Issues bid technical clarifications, attends internal & external bid meetings, etc.
Prepares estimates for equipment and activities as required for proposals and when potential work scope change occurs. Captures scope change (additions / deletions) and submits claims as and when required and provides necessary inputs to DTCM system.2018-04-02 05:53:54 |
ELECTRONICS & INSTRUMENTATION Engineering Interview Questions
