commissioning Engineer-Mechanical
Commissioning Engineer-Mechanical (8-15 Yrs )Alghanim International |
Al Kuwait
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
02-04-2018To manage commissioning teams and start-up activities, maintain technical standard and plan and direct start-up engineering assignments on the project including, undertaking the technical responsibility for interpretation, organizing, executing, and coordinating these assignments.2018-04-02 16:11:12 |
commissioning Inspector
Commissioning Inspector (7-14 Yrs )Tata Projects Limited |
Al Ahmadi
,
Kuwait
Kuwait
Al Kuwait
,
Kuwait
Kuwait
Hawali
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
27-03-2018Looking for commissioning Inspector for Kuwait location1. Piping Inspector-commissioningBE/B.Tech or Diploma Mechanical/Production7-10 YearsCSWIP 3.1/AWS & ASNT Level IIResp :Preparation QA/QC documents, site quality plans, inspection test plans, work procedure, welding procedures etc.,Familarity with International Standards codes ASME V and IX, ANSI B31.3/4/8, API 1104 EtcChecking the piping materials as per codes and process standard specifications.Ensure satisfactory identification of materials, proper protection of piping and fittings. Verify proper size and schedule of pipe, rating of flange face and fittings.Preparing take of list as per isometric drawing.Inspection of shop fabrication of piping spools and supports. Visual inspection of plant piping and preparing Punch list after installation.Preparation of Hydro test packages as per PID, Isometric drawings, hydrostatic drawings and all related documents.Make all installations checks prior to pre-commissioning activitiesMake pre and post commissioning checks for all mechanical installations Completing check lists provided by immediate supervisor/s2. Rotating Inspector-commissioningBE/B.Tech or Diploma Mechanical/Production7-10 YearsCSWIP 3.1/AWS & ASNT Level II'Check and inspect rotating equipment and/or components to ensure they meet project requirementsInspection of Rotating Equipments like Compressors Centrifuges,Gearbox,Pumps etc.. in compliance to various Codes, Standards and Project Specifications for the Equipments.Equipment receiving, storage and preservation and ensure inspection as per ITP, Inspection checklist, Material System Specification, Engineering Standard and Process Industry Practices.Familarity with International Standards codes ASME Sec I, V, VIII and IX, API ANSI B73.1M / ANSI B73.2M / API 610 / API 617 / API 618 / API 619 and AWS D1.1Verifying Mechanical Completion acceptance and punch lists prior to starting commissioning activities.Assuring Mechanical Completion and commissioning punch lists are properly detected, integrated within master punch list and then clearedPreparing handover documentation (validating/compiling all relevant check sheets, test reports and certificates).'3. Static Inspector-commissioningBE/B.Tech or Diploma Mechanical/Production7-10 YearsCSWIP 3.1/AWS & ASNT Level IIStage wise inspection of Pressure Vessel as per ITP.Inspection of Static Equipments like Pressure Vessels, Processing Columns and Storage Tanks in compliance to various Codes, Standards and Project Specifications for the Equipments and Pipelines fabricated at Shop/ ProjectPreparation of QAP / Weld Plan & Inspection Check List/ Material Heat Chart etc. for specific Project requirements.Equipment receiving, storage and preservation, pre-installation, elevation/alignment, internal installation and leak testing inspection as per ITP, Inspection checklist, Material System Specification, Engineering Standard and Process Industry Practices.Familarity with International Standards codes ASME Sec I, V, VIII and IX, API 620,650 and AWS D1.1.To review and provide inputs to contractor pre-commissioning, testing and commissioning execution plans, schedules, resources allocation, test procedures and final documentation.To supervise and clear commissioning related punchlist / outstanding works and To oversee all commissioning activities and ensure they are in compliance with the companys HSSE standards and safe practices.2018-03-27 15:27:08 |
commissioning Engineer
Commissioning Engineer (10-15 Yrs )Kentz Corporation Limited |
Al Kuwait
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-2018Due to continued expansion and growth we currently have a requirement for a commissioning Engineer, based in Kuwait.
Responsibilities
Agreeing with the commissioning Manager the resources needed on site for commissioning requirements.
Comply with commissioning Manager instructions in the setting up of a system to provide for the commissioning requirements.
Collecting and reviewing physical progress data and reporting to the Project Manager on commissioning progress performance and trends.
Preparation of commissioning Manuals and Operating and Maintenance Manuals
Setting up the commissioning strategy document which outlines the procedures and processes to be utilised in commissioning the new facility.
Provision of a Testing & commissioning plan for the facility / Equipment to meet Health & Safety requirements.
Responsibility for the review and approval of all commissioning documentation received - contractors and equipment vendors in conjunction with the Project Engineers.
To co-ordinate and manage the completion of the commissioning activities in accordance with the agreed strategy and schedule.
Maintain the commissioning Plan for the facility/ Equipment
Manage commissioning contractor and vendor resources to ensure the commissioning effort is completed efficiently and on schedule.
Report on progress.
Education and Skills
Degree qualified
10 to 15 years experience in Oil and Gas
Sound Design Engineering knowledge
Sound knowledge of Installation practices
Knowledge of relevant specification / International standards.
Safety Rules and procedures
Key Benefits
Well supported by this global engineering and construction organisation
Long term rewarding career on offer
Excellent salary package with benefits
On-going professional and personal development
Gain valuable experience on major resource projects
*LI-SD2018-04-19 22:45:18 |
commissioning Engineer
Commissioning Engineer (10-15 Yrs )Client of Heston |
Al Kuwait
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-2018Minimum Requirements:
Bachelor Degree in Engineering.
Minimum 10 years of experience in field operations, of which 5 years in oil and gas industry preferably in thermal operations and 5 years in operations within related field, should have good knowledge of international codes and standards.
Very good written and spoken English.2018-04-19 20:19:00 |
Expression of Interest - Maintainence commissioning Specalist
Expression of Interest - Maintainence Commissioning Specalist (8-12 Yrs )Kentech |
Al Kuwait
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-2018Maintenance commissioning Specialist- Instrumentation•The experience shall be mainly in pre commissioning& commissioning activities of Electrical equipment such as HV/MV/LVSwitchgears, Protection Relays, PowerTransformers, Motor Control centers, MV/LVMotors, Variable Speed Drives, UPS & BatteryChargers, MOVs, Capacitor Banks, Electrical Heat tracing Systems, Fire Alarm & FireFighting Systems with at least four (4) years in a key commissioning role in large refinery or petrochemical industry.•Minimum Industrial experience: 8 years for Degree holders and 12 years for Diploma holders.•6 years’ experience in similar position.•B.S. Graduate or Diploma in Electrical Engineering discipline from a recognized InstituteMaintenance commissioning Specialist- Electrical•Good working (practical) knowledge about various process control instruments and skill to check, calibrate and repair them up to the DCS system. Should have a good knowledge on the DCS – Honeywell system•Working knowledge and understanding of Digital Electronics basics and able to use Electronic test equipment for trouble-shooting /testing purposes. Good knowledge in DCS, PLC and ESD’s of major international makes.•Minimum 8 years Industrial experience for Degree holders and 12 years for diploma holders•B.S. Graduate or Diploma in Instrument /Electronics Engineering discipline from recognized institute.Maintenance commissioning Specialist- Static and Rotary equipment •12 years commissioning experience in rotating/ static equipment with at least four (4) years in a key commissioning role•6 years of experience in the similar role•Minimum 8 years of industrial experience for degree holders and 12 years for diploma holders•B.S. Graduate or Diploma in Mechanical Engineering discipline from a recognized institute2018-04-19 16:25:18 |
Expression of Interest - HSE commissioning Specialist
Expression of Interest - HSE Commissioning Specialist (8-12 Yrs )Kentech |
Al Kuwait
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-2018•Experience in PMC or EPC organization in the field of Refinery/Petrochemical and must handle business activities related to major projects not less than US 250 Million each.•Strong experience in providing HSE support services for pre-commissioning, commissioning & operation etc. of mega refinery project.•Experience as HSE specialist in Operating Refineries / Petrochemicals units•Experience in the field of Marine and Offshore activities with regards to Construction/ Precomm/ commissioning and Operations.•Experience in conducting field HSE surveys and audits, report preparation and follow-up of gaps to closure•Experience in incident reporting & investigation and HSE statistics reports. Experience in presenting HSE performance in meetings with commissioning teams.•Close monitoring of refinery project commissioning activities etc.•Advising corrective actions for HSE issues and ensuring their implementation with commissioning team etc.•Experience of implementing Process Safety Management requirements during pre commissioning, commissioning & operation of new refinery /petrochemicals project.•Possess good knowledge of OHSAS 18001, ISO 14001 and HSE international standards/regulations.•Develop HSE Plan for Pre-commissioning and commissioning activities.•Develop Risk Assessment for Pre-commissioning and commissioning activities.•Develop Pre Start up Safety Review for Units. Site HSE Audit for all activities. Site Audit for Permit to Work implementation.•Develop Emergency Plan during Pre-commissioning and commissioning activities.•Provide training on HSE issues & Good level of verbal & written English knowledge.•Develop HSE related Checklists for each phase of commissioning ensuring all HSE aspects.•Develop Process Safety Management (PSM) requirements and ensure implementation etc.PERSON SPECIFICATIONSkills:•Strong English capability. •Have a technical appreciation to assist in manging Pre-qualificationsQualification:•Degree in technical subject or marketingExperience:•Number of years post qualification experience: 15•Number of years relevant industry experience: 15•Number of years relevant experience in the role: 8•Number of years overseas experience: NA2018-04-19 16:25:16 |
Expression of Interest - commissioning Specialist
Expression of Interest - Commissioning Specialist (8-12 Yrs )Kentech |
Al Kuwait
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-2018commissioning Specialists•Strong people management and interpersonal skills.•Good written, verbal communication and Presentation skills in English.•A minimum of 12 years’ of experience in operating and commissioning of the field of refinery / petrochemicals.•At least 5 years’ experience in a similar positon in the field of refinery handling process related to pre-commissioning and commissioning activities.•Specific process units experience relevant to the project (CDU / DHT/ KHT / NHT / ARDS / HOC / SGU/HYDROGEN/SULPHUR / UTILITIES/ TANKFARM/ MARINE).•Degree/Diploma in Chemical Engineering / Diploma from Accredited Technological InstituteField commissioning Specialists•Experience in the field of Refinery /Petrochemicals industries in handling activities related to Refinery Field Operators.•Experience in specific / similar unit shall be preferred.•Experience in similar position For Diploma Holders - 5 years•Age 25 – 60 years•Degree/Diploma in Chemical Engineering from Accredited Technological InstituteDCS commissioning Specialists•A minimum of 10 years’ of experience in operating and commissioning of the field of refinery / petrochemicals.•At least 3 years’ experience in a similar positon in to DCS and Process control activities for pre- commissioning and commissioning or Refinery units•Specific process units experience relevant to the project (CDU / DHT/ KHT / NHT / ARDS / HOC / SGU/HYDROGEN/SULPHUR / UTILITIES/ TANKFARM/MARINE).•Strong interpersonal skills.•Good written , verbal communication and Presentation skills in English•Degree/Diploma in Chemical Engineering / Diploma from Accredited Technological InstituteScheduling Specialists•A minimum of 12 years’ of experience in Technical Service department and Operations of Refinery / Petrochemicals.•At least 6 years’ experience in a similar position with a pre-commissioning and commissioning project(s)•Proven experience in handling Operations Scheduling activities related to refinery Operations using planning and scheduling software’s tools.•Proven experience for renowned clients in region.•Specific experience in Process Units relevant to the project.•Strong people management and interpersonal skills.•Good written, verbal communication and presentation skills in English•B.E in Chemical Engineering or EquivalentOperations Specialists•Experience in commissioning of Refinery / Petrochemicals.•At least 6 years’ experience in a similar position with a pre-commissioning and commissioning project(s)•Proven experience in handling activities related to refinery Operations.•Specific Process Units experience relevant to the project (CDU / KHU / NHTU / ARDS / HOC / SGU/ HYDROGEN/SULPHUR/SWS/ARU/FLARES/UTILITIES/•TANKFARM AND MARINE).•Proven experience for renowned clients in region•Specific experience in Process Units relevant to the project.•Strong people management and interpersonal skills.•Good written, verbal communication and presentation skills in English.•B.E in Chemical Engineering or EquivalentProcess Specialists•A minimum of 12 years’ of experience in Technical Service department and Operations of Refinery / Petrochemicals.•At least 6 years’ experience in a similar position with a pre-commissioning and commissioning project(s)•Proven experience in handling activities related to refinery Operations.•Specific Process Units experience relevant to the project (CDU / KHU / NHTU / ARDS / HOC / SGU/ HYDROGEN/SULPHUR/SWS/ARU/FLARES/UTILITIES/TANKFARM AND MARINE).•Proven experience for renowned clients in region.•Strong people management and interpersonal skills.•Good written, verbal communication and presentation skills in English.•B.E in Chemical Engineering or EquivalentOperations Readiness Specialist•Operations Readiness Program for Projects in Refinery/ Petrochemical / Oil & Gas industry•Experience in Grass root refinery/ Petrochemical projects added advantage.•Strong people management and interpersonal skills.•Good written, verbal communication, presentation skills in English.•B.E in Engineering or equivalent2018-04-19 16:25:16 |
EPC-commissioning Manager (Building Services - MEP)
EPC-Commissioning Manager (Building Services - MEP) (15-25 Yrs )Kharafi National |
Al Kuwait
Kuwait
Kuwait
|
19-04-2018JOB OBJECTIVES 1.          To plan, develop, co-ordinate and direct start-up activities for the assigned project. Provide start-up assistance at the jobsite. 2.           To assist with the identification of hand over systems and the establishment of priorities and sequence of completion. 3.           To review during the construction phase the status of testing and punch listing to ensure systems are turned over to commissioning and start-up in a smooth, safe and efficient manner. 4.          To interface with Client’s operation staff and keep them informed of system completion status. 5.          To supervise, co-ordinate and review the work of assigned engineers, estimate staffing needs and schedules, and assign work to meet completion dates. 6.          To prepare or direct the preparation of operations manuals. 7.          To ensure that work being performed is within scope of services and within budget. 8.         To input to project management, engineering, and construction to ensure start-up requirements are incorporated into project activities, including review of project designs and construction to ensure plant operability and operating personnel safety. 9.         To co-ordinate with client representatives to obtain approval on work as it is accomplished. 10.       To review and approve key start-up methods, procedures, and schedules on assigned project(s). 11.       To perform personnel evaluations for personnel supervised and ensure that they receive appropriate on-the-job training for their professional development. 12.         To make contact with client management at key points throughout projects to ensure that start-up aspects are meeting client requirements. 13.          To regularly review and appraise the structure of the start-up organisation, in terms of its ability to meet short and long term objectives, and institute appropriate changes. EDUCATION, SKILLS AND EXPERIENCE  Essential: ·              A recognized Degree in an Engineering or Scientific discipline from an accredited College or University or a professional license in an Engineering discipline or a sufficient number of specialised courses in relevant general Engineering or an appropriate Engineering discipline to meet the job requirements ·              Solid background and expertise on EPC Projects, specifically on Oil/Gas, Utility and/or Infrastructure type Projects ·              Technical knowledge of start-up operations, maintenance, and/or testing, including the development of commissioning and start-up manuals and associated method statements ·              Knowledge of engineering systems and calculations, applications of both engineering and start-up methods, coupled with knowledge of computer applications related to the close out and resolution of engineering problems ·              An extensive knowledge of precedents in the start-up and operations areas and a broad knowledge of principles and practices of related areas ·              A broad knowledge of industry and regulatory standards and criteria pertinent to start-up, maintenance, operations, or testing ·              Skill in oral and written communication ·              Demonstrated skill in leadership ·              Broad progressive work experience to the degree necessary to perform the responsibilities outlined above aligned with commissioning, initial start-up and operation activities or other relevant experience in design engineering, construction, field engineering or plant operation in industrial, process, or marine facilities ·               15 to 20 years of experience in the related field.  2018-04-19 15:18:38 |
EPC-commissioning Manager (Water & Waste Water)
EPC-Commissioning Manager (Water & Waste Water) (15-25 Yrs )Kharafi National |
Al Kuwait
Kuwait
Kuwait
|
19-04-20181.         To plan, develop, co-ordinate and direct start-up activities for the water & wasterwater project. Provide start-up assistance at the jobsite. 2.         To assist with the identification of hand over systems and the establishment of priorities and sequence of completion. 3.         To review during the construction phase the status of testing and punch listing to ensure systems are turned over to commissioning and start-up in a smooth, safe and efficient manner. 4.         To interface with Client’s operation staff and keep them informed of system completion status. 5.         To supervise, co-ordinate and review the work of assigned engineers, estimate staffing needs and schedules, and assign work to meet completion dates. 6.         To prepare or direct the preparation of operations manuals. 7.         to ensure that work being performed is within scope of services and within budget. 8.            To input to project management, engineering, and construction to ensure start-up requirements are incorporated into water & wastewater project activities, including review of project designs and construction to ensure plant operability and operating personnel safety. 9.            To co-ordinate with client representatives to obtain approval on work as it is accomplished. 10.         To review and approve key start-up methods, procedures, and schedules on assigned waste & wastewater project(s). 11.         To perform personnel evaluations for personnel supervised and ensure that they receive appropriate on-the-job training for their professional development. 12.         To make contact with client management at key points throughout projects to ensure that start-up aspects are meeting client requirements. 13.          To regularly review and appraise the structure of the start-up organisation, in terms of its ability to meet short and long term objectives, and institute appropriate changes.  EDUCATION, SKILLS AND EXPERIENCE Essential: ·              A recognized Degree in Mechanical Engineering discipline from an accredited University or a professional license in an Engineering discipline or a sufficient number of specialized courses in relevant general Engineering or an appropriate Engineering discipline to meet the job requirements. ·              Solid background and expertise on EPC Projects, specifically on Waste & WasteWater Projects. ·              Technical knowledge of start-up operations, maintenance, and/or testing, including the development of commissioning and start-up manuals and associated method statements ·              Knowledge of engineering systems and calculations, applications of both engineering and start-up methods, coupled with knowledge of computer applications related to the close out and resolution of engineering problems ·              An extensive knowledge of precedents in the start-up and operations areas and a broad knowledge of principles and practices of related areas ·              A broad knowledge of industry and regulatory standards and criteria pertinent to start-up, maintenance, operations, or testing. ·              Skill in oral and written communication. ·          Ability to travel and has a passport that allows travel flexibility. ·              Demonstrated skill in leadership. ·              Broad progressive work experience to the degree necessary to perform the responsibilities outlined above aligned with commissioning, initial start-up and operation activities or other relevant experience in design engineering, construction, field engineering or plant operation in industrial, process, or marine facilities.  ·15 to 20 years of experience in the similar field.2018-04-19 15:18:38 |
Lead Construction Engineer - commissioning
Lead Construction Engineer - Commissioning (2-4 Yrs )AMEC |
Al Ahmadi
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-2018Management of an assigned construction workscope, through effective teamworking with the Contractor to ensure the work is performed safely to the agreed schedule and to an acceptable standard.
Provide leadership and direction to an assigned team of PMC personnel to effectively coordinate, monitor, and facilitate the work.
Key aims and objectives
Assigned scope of work is carried out without any significant HSE incidents.
AMEC reputation is enhanced by completing the assigned scope of work within schedule and budget to an acceptable standard.
Prime responsibilities and duties
Promote HSE awareness and ensure that all client and AMEC HSE requirements are implemented and adhered to.
Provide effective and practical construction input into study, FEED, and contract action phases of projects to ensure constructability aspects of project execution are adequately considered.
Ensure that construction hazards and risks are fully considered by designers and contractors and that the appropriate mitigation actions are implemented during the project execution phase.
Coordinate with all project stakeholders, especially Clients, to facilitate the project execution with minimum disruption and hazards to both ongoing operations and the construction Contractor.
Liaise with the Contractor and other PMC groups to ensure timely and effective release of construction data/drawings and resolution of problems.
Ensure that efficient and effective communications are maintained between the Contractor and PMC, ensuring that all reporting requirements are met.
Ensure, through review and monitoring, that the construction schedules are achievable and that early mitigation of slippage or use of opportunities is identified and appropriate action taken.
Provide notification of any potential commercial risk or opportunity to the Contract group for further action.
Develop close working relationships between all assigned construction team members and the HSEQ team to provide a consistent approach and effective resolution of issues. Encourage the same degree of cooperation within the Contractor organisation.
Develop a good team spirit within assigned PMC personnel and encourage team working with the Contractor and other client groups.
Ensure that construction quality is maintained at an acceptable level, including all required records and tests; thus ensuring that pre commissioning, commissioning and handover are achieved.2018-04-19 14:38:14 |
Senior commissioning Specialist - Offsites
Senior Commissioning Specialist - Offsites (11-20 Yrs )SPIE Oil & Gas Services Middle East L.L.C. |
Al Ahmadi
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-2018We currently have an opportunity within SPIE Oil & Gas Services Middle East LLC in GCC for a: SENIOR commissioning SPECIALIST - OPERATIONS OFFSITESThis is an opportunity for you to be the superintendent of the pre-commissioning / commissioning activities according to detailed procedures.Your main duties will be:-- Develop and coordinate a detailed master plan of all commissioning and start-up of the project. - Ensure capturing lessons learned from previous projects. identify opportunities for increasing readiness assurance. mitigate pre-commissioning, commissioning and start-up risks; and provide suggested improvements for identified gaps.- Supervise progress of preparations, secured requested materials and manpower for scheduled daily activities.- Participated in start up and Run test for Dynamic Equipment together with Vendor.- Coordinate Licensors plan and overall management of their activities at site during commissioning and start up - Participate to plant inspection for mechanical completion.- Perform with success performance tests and interim operation.SPIE Oil and Gas Services is acting as an Employment Business in relation to this vacancy.2018-04-19 12:54:25 |
LEAD commissioning ENGINEER
LEAD COMMISSIONING ENGINEER (8-15 Yrs )Kentz Management Ltd. |
Al Kuwait
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-2018Kentz is a global engineering specialist solutions provider, with 14,500 employees operating in 30 countries worldwide. We have provided Engineering, Procurement and Construction (EPC) services, Construction, and Technical Support Services (TSS) to clients in the energy and resources sectors for more than 90 years. Kentz is listed on the London Stock Exchange (symbol: KENZ) and is a member of the FTSE 250.
Kentz now has an urgent requirement for a Lead commissioning Engineer, based in Kuwait.
Responsibilities
Reports to his Line Manager.
Must have managed large sized projects in oil and gas industry leading a Team and shall have precommissioning, commissioning and performance testing experience.
Must have a minimum recent one (1) year experience with the Contractor in the similar position.
Education and Skills
Bachelors Engineering degree from an accredited college/university.
Total minimum experience of 10 years.
8 years minimum experience in Oil & Gas / Refinery / Petrochemical Industry.
5 years minimum experience in related designation.
Key Benefits
Well supported by this global engineering and construction organization
Long term rewarding career on offer
Excellent salary package with benefits
On-going professional and personal development
Gain valuable experience on major resource projects.2018-04-19 12:07:35 |
DCS commissioning Specialists (Utilities)
DCS Commissioning Specialists (Utilities) (10-20 Yrs )SPIE Oil & Gas Services Middle East L.L.C. |
Al Ahmadi
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-2018We currently have an opportunity within SPIE Oil & Gas Services Middle East LLC in Kuwait for a: DCS commissioning SPECIALISTS / CONSOLE OPERATOR (UTILITIES)This is an opportunity for you to operate the plant in a safe and optimal manner from the console using the process automation system in place.Your main duties will be:-- Relieving the head operator and rotation in all positions to maintain skills when qualified- To control continuous operation of the units under his care- To execute appropriate processes needed for start, operation and interruption of an installation / equipment or a production unit, in compliance with procedures and instructions- To ensure implementation of operation procedures and safety and environment rulesSPIE Oil and Gas Services is acting as an Employment Agency in relation to this vacancy.2018-04-19 11:42:07 |
Senior commissioning Specialist - Utilities
Senior Commissioning Specialist - Utilities (15-20 Yrs )SPIE Oil & Gas Services Middle East L.L.C. |
Al Ahmadi
Kuwait
Kuwait
|
19-04-2018We currently have an opportunity within SPIE Oil & Gas Services Middle East LLC in Kuwait for a: SENIOR commissioning SPECIALIST - UTILITIESThis is an opportunity for you to be the superintendent of the pre-commissioning / commissioning activities according to detailed procedures.Your main duties will be:-- Develop and coordinate a detailed master plan of all commissioning and start-up of the project.
- Ensure capturing lessons learned from previous projects. identify opportunities for increasing readiness assurance. mitigate pre-commissioning, commissioning and start-up risks; and provide suggested improvements for identified gaps.
- Supervise progress of preparations, secured requested materials and manpower for scheduled daily activities.
- Participated in start up and Run test for Dynamic Equipment together with Vendor.
- Coordinate Licensors plan and overall management of their activities at site during commissioning and start up
- Participate to plant inspection for mechanical completion.
- Perform with success perforSPIE Oil and Gas Services is acting as an Employment Business in relation to this vacancy.2018-04-19 11:29:28 |
commissioning manager
Commissioning manager (15-20 Yrs )Alghanim International |
Al Kuwait
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-20181. To manage a team of Pre-commissioning & commissioning working Power Project. The commissioning Manager will manage commissioning and start-up activities of the power generation plant.
2. To plan, develop, co-ordinate and direct start-up activities for the power plant project.
3. Provide start-up assistance at the jobsite.
4. To review during the construction phase the status of testing and punch listing to ensure systems are turned over to commissioning and start-up in a smooth, safe and efficient manner.
5. To interface with Clients operation staff and keep them informed of system completion status.
6. To supervise, co-ordinate and review the work of assigned engineers, estimate staffing needs and schedules, and assign work to meet completion dates.
7. To prepare or direct the preparation of operations manuals.
8. To ensure that work being performed is within scope of services and within budget.
9. To input to project management, engineering, and construction to ensure start-up requirements are incorporated into power plant project activities, including review of project designs and construction to ensure plant operability and operating personnel safety.
10. To review and approve key start-up methods, procedures, and schedules on assigned power plant project(s).
11. To make contact with client management at key points throughout projects to ensure that start-up aspects are meeting client requirements.2018-04-19 11:07:18 |
commissioning Specialist
Commissioning Specialist (10-17 Yrs )SPIE Oil & Gas Services Middle East L.L.C. |
Al Ahmadi
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-20181We currently have an opportunity within SPIE Oil & Gas Services Middle East LLC in Kuwait for a: commissioning SPECIALISTS / SHIFT SUPERVISORThis is an opportunity for you to supervise, train, coordinate and evaluate the work of staff involved commissioning and operation phases.Your main duties will be:-- Supervises and directs the activities of staff within the assigned Unit.- Schedules, coordinates and provides field supervision of staff involved in operation Team- Prepares work plans for the day to day activities.- Maintains records and prepares reports.SPIE Oil and Gas Services is acting as an Employment Agency in relation to this vacancy.2018-04-19 10:40:29 |
commissioning Manager
Commissioning Manager (12-15 Yrs )Larsen & Toubro Limited |
Al Kuwait
,
Kuwait
Kuwait
Kuwait
Not Mentioned
Kuwait
|
19-04-2018Experience in medium to large (USD($) 1Billion) Oil & Gas projects in commissioning.
Experience in working with Major EPC / Construction companies and exposure to major International project Consultants is essential.
Should have worked as commissioning manager for at least 2 major EPC projects.
Should be able to Manage, Motivate & Guide the commissioning team, develop project commissioning procedures and method statements necessary to safely start up the facilities and review & approve all commissioning procedures prepared by the various project contractors.
Resource scheduling & optimization for timely mobilization and demobilization.
Advise, implement and control the undertaking of all pre- commissoning, commissioning and start up activities.
Experience in operational support and development of engineering roles.
Relocation for E&P work may be required. Responsible for successful commissioning including Guarantee Test Run.
Experience in handling Projects of KOC/KNPC in Kuwait for a minimum of 3-5 years is highly desirable. In case of experience with oil companies other than KOC/KNPC then, experience in oil gathering & gas processing projects, is essential.2018-04-19 10:24:10 |
Field commissioning Specialists
Field Commissioning Specialists (10-15 Yrs )SPIE Oil & Gas Services Middle East L.L.C. |
Al Ahmadi
Kuwait
Kuwait
|
19-04-2018We currently have an opportunity within SPIE Oil & Gas Services Middle East LLC in the GCC for a: FEILD commissioning SPECIALISTS / OPERATORThis is an opportunity for you to be in the field to operate the plant in a safe and optimal manner.Your main duties will be:-- Ensures all personnel adhere to a high standard of Safety under the PTW system and is responsible for all jobs on the Plant (Cold, Hot )
- Conducts of Tool Box Talks on daily basis for jobs on the Plant
- Conducts of Job Safety Analysis in case of job to be carried out with potential hazards
- Communicates and informs CR about job progress and, if need be, about any problem encountered
- Acts as On scene Operator in case of emergency
- Performs a Plant inspection (Checking of any leak, Safety - Equipment checks, checking of rotating equipment condition )
- Takes Field Parameters Readings (DCS, Separators )
- Checks Chemical pumps, adjusting dosing rates and chemical filling
- Performs jobs as per Control Room requirements including the re-setting of valves for restarting after a shutdown
- Assists Maintenance Team for Mechanical Isolations / De-isolation, CO2018-04-19 10:19:33 |
commissioning MANAGER
COMMISSIONING MANAGER (18-30 Yrs )SPIE OIL &GAS SERVICES |
Al Jubail
,
Not Mentioned
Al Jubail
Saudi Arabia
Not Mentioned
Saudi Arabia
|
09-04-2018In order to support this growth, SPIE Oil & Gas Services is always seeking talented individuals to join its teams. We currently have an opportunity within SPIE Oil & Gas Services Middle East LLCfor a:
commissioning MANAGER - IMMEDIATELY AVAILABLE
This position is a unique opportunity to lead, direct and supervise a team of discipline Engineers in preparation and execution of commissioning of process plants assuming entire responsibility for the completion of the implementation in conformance with the clients needs and HSE standards.
Your main duties will be:
- To carry out a detailed assessment of the work involved in the individual group as well as discipline with respect to the commissioning and assess the available resources and possible constraints in the execution of the same.
- Prepare manpower organization to fulfill the commissioning schedule. Coordinate with other departments/ agencies to resolve interface problems.
- Oversee all construction activities are completed prior to taking up the system for commissioning and ensure the setting up of safety procedures for the same.
- Provide guidance to the commissioning Engineers in analyzing the scope as per contract and battery limit /guarantees as well as ensure the preparation of procedures for systematic and sequential pre commissioning/commissioning/start up of plant.
- Carries out detailed analysis of plant commissioning, assessing the requirements of special tools /temporary facilities/equipment's required for pre commissioning and commissioning, prepares Equipment/Tools list and initiate procurement.
- Ensures that all safety and precautionary requirements and procedures are followed during the commissioning process.2018-04-09 16:34:03 |
Electrical commissioning Technician
Electrical Commissioning Technician (10-18 Yrs )Air Energi |
Al Madina Al Munawarah
,
Saudi Arabia
Saudi Arabia
Saudi Arabia
Not Mentioned
Saudi Arabia
|
09-04-2018Our client, one of the leading engineering and construction groups in the world and a major player in the ownership of infrastructure, is hiring for 8 Electrical commissioning Technicians on 15 months Contract for a Refinery Project to be based inSaudi Arabia. Skills and Experience Required:Familiar with the pre-commissioning/commissioning of HV/LV Electrical Equipment and Switchgear.Competent to work within Substations and having a Switching Assessment of AEP or CP.Having full awareness of Pertmit to Work and LOTO Systems.Familiar with the commissioning Documentation.Experience with Oil & Gas, Petrochemical or Refinery Projects.8 to 10 years Electrical commissioning Experience. ADDITIONAL INFORMATIONLocalisation : Yanbu -SAUDI ARABIAStart Date: ASAPProject duration : 06/2015Work Hours: 6 days worked per weekRotations: 14x2Accommodation, transporation and Food will be provided.Air Transportation: Economic ClassLanguages: English, Arabic is a plus.Please Email: [email protected]2018-04-09 15:31:10 |