IT engineer 
INR7"YEARLY"
IT ENGINEERFull Time (3-5 Yrs )Client of Al Sofi Manpower Consultant |
Oman
Not Mentioned
oman
0oman
|
23-08-2019 2019-11-21Good knowledge ina. IP CCTV Camera, NVR, VMS, ANPR, Video Analytics, NAS, SAN etc.b. Access control and attendance system, AC software modules and integration.c. Gate automation Boom barriers, turnstiles, sliding gates and its integration with ACSor BMSd. PA/BG system (IP/Digital)e. Networking (switching, routing, WLAN managed wifi, VLANs, VPN etc.)f. Firewalls, UTM and QoS policies, Authentication Methods etc.g. IT hardware, Servers, Workstations, Microsoft products configuration, activation andmaintenance.3. Good knowledge and experience in designing and implementing Passive network, structured cabling solution, Optical Fibre Network, FTTH etc.4. Experience in working with brands like of Cisco, Nortel, Allied Telesys, Extreme, Fortiget,Netgear, Checkpoint, Watchguard, Cyberoam, Motorola, Juniper, Aruba, HPE, SonicWALL, Avaya, AMP, Systemax,Belden, Honeywell, Bosch, Axis, Pelco etc.5. Hands on experience in Implementing Networking, IP CCTV, ELV, IT projects on site,managing technicians and labors.2019-08-23 12:59:23 |
Apply Now |
Sr. Mechanical Commissioning engineer (Rotating)
INR7"YEARLY"
Sr. Mechanical Commissioning Engineer (Rotating)Full Time (14-20 Yrs )Superiority of Modern Services LLC(SOMS) |
Muscat
,
Oman
Oman
0muscat
Al Batinah
,
Not Mentioned
al batinah
0al batinah
Ash Sharqiyah
,
Not Mentioned
ash sharqiyah
0ash sharqiyah
Oman
Not Mentioned
oman
0oman
|
23-08-2019 2019-11-2114-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on fractionation columns, LPG/NGL extraction, Gas compression, gas processioning• 14-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on cryogenic tanks (propane, propylene, ethylene, LNG), Boil of gas compression unit, propane/ propylene chilling packages. Some of key responsibilities.o Development & execution of the project facility commissioning & startup activities through the review of and input to the EPC contractorso Facilitate the final handover of the facility to the operations teamso Development of commissioning and operations procedures with the EPC contractor, vendor.2019-08-23 12:58:34 |
Apply Now |
Sr. Mechanical Commissioning engineer (Static)
INR7"YEARLY"
Sr. Mechanical Commissioning Engineer (Static)Full Time (14-20 Yrs )Superiority of Modern Services LLC(SOMS) |
Muscat
,
Oman
Oman
0muscat
Al Batinah
,
Not Mentioned
al batinah
0al batinah
Ash Sharqiyah
,
Not Mentioned
ash sharqiyah
0ash sharqiyah
Oman
Not Mentioned
oman
0oman
|
23-08-2019 2019-11-2114-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on fractionation columns, LPG/NGL extraction, Gas compression, gas processioning• 14-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on cryogenic tanks (propane, propylene, ethylene, LNG), Boil of gas compression unit, propane/ propylene chilling packages.o Development & execution of the project facility commissioning & startup activities through the review of and input to the EPC contractorso Facilitate the final handover of the facility to the operations teamso Development of commissioning and operations procedures with the EPC contractor, Facilitate the final handover of the facility to the operations teamso Development of commissioning and operations procedures with the EPC contractor, vendor.2019-08-23 12:58:34 |
Apply Now |
Sr. Telecom Commissioning engineer
INR7"YEARLY"
Sr. Telecom Commissioning EngineerFull Time (14-20 Yrs )Superiority of Modern Services LLC(SOMS) |
Muscat
,
Oman
Oman
0muscat
Al Batinah
,
Not Mentioned
al batinah
0al batinah
Ash Sharqiyah
,
Not Mentioned
ash sharqiyah
0ash sharqiyah
Oman
Not Mentioned
oman
0oman
|
23-08-2019 2019-11-21• 14-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on fractionation columns, LPG/NGL extraction, Gas compression, gas processioning • 14-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on cryogenic tanks (propane, propylene, ethylene, LNG), Boil of gas compression unit, propane/ propylene chilling packages.o Development & execution of the project facility commissioning & startup activities through the review of and input to the EPC contractorso Facilitate the final handover of the facility to the operations teamso Development of commissioning and operations procedures with the EPC contractor.2019-08-23 12:58:34 |
Apply Now |
HVAC-engineer/COORDINATOR – PROJECTS, SERVICES & MAINTENANCE
INR7"YEARLY"
HVAC-ENGINEER/COORDINATOR – PROJECTS, SERVICES & MAINTENANCEFull Time (10-16 Yrs )Al Noor Projects Engineering & Trading LLC |
Oman
Not Mentioned
oman
0oman
|
23-08-2019 2019-11-21Responsibilities:To provide all necessary support in general to the site supervisors (Projects & Maintenance) for department operations.
To coordinate all the activities of the department and ensure the works are done to the satisfaction of all customers/clients.
To review all site inspection reports, discuss with the department head, prepare a list of required materials, and arrange the materials through store/inventory.
To ensure a logbook is maintained, all daily complaints are recorded, and the actions are taken timely.
To prepare the work schedule on a daily basis based on the inspection reports received from the Supervisors and discuss the same with the department head.
All operational works for the Service and Projects department shall be planned and monitored by the Projects & the Service coordinator.
To prepare a service schedule for all AMC and keep monitoring on a regular basis.
To prepare a project’s completion schedule and keep monitoring its progress.
To ensure customers satisfaction at every level.
Ensure all complaints are reported and recorded on time, and the works are finished on time
Preparation and submission of tenders and quotations.
Ensure a vigorous follow-up till the approval is received from the clients/customers.
Ensure all steps are taken and followed from start to finish; the closer reports are prepared as per the time frame.
Ensure all invoices are submitted within a stipulated time as required by the department head/ management.
To monitor all assigned cases for customer support and update all activities on the company tracking system.
Administer all resources and ensure delivery of service works are fixed within a time frame.
Manage all customer issues and if required bring it to the head of services or technical head.
Pass on all technical issues to the service head/technical head/ GM if the problems are not getting solved by the supervisors and their technical team.
Maintain accurate customer documents and prepare reports for all issues and resolutions.2019-08-23 12:58:28 |
Apply Now |
Associate Specialist - Services Programs
INR7"YEARLY"
Associate Specialist - Services ProgramsFull Time (1-10 Yrs )General Electric (GE) |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Role Summary:Leading, EHS wise, a team responsible for day-to-day operations and maintenance activities at wind farm facility. This includes the development, planning and implementation of Environmental Health and Safety programs & policies as per the GE guidelines and industry best practices. This EHS coordinator position will function in a team which includes other members of plant level staff, Technicians to ensure EHS compliance and strengthen our Wind Turbine Service and Maintenance team in OmanEssential Responsibilities:Ensure compliance of wind power plant operations with regulatory requirements relating to air, solid & hazardous waste, chemical, water, oil, greases, working at height, confined space and environmental health and safety.. Provide proactive leadership on all EHS and medical issues.. Create and run training sessions, refreshers for site personnel. Create and grow safety culture at assigned project. Implement / modify EHS programs and procedures to ensure company compliance and customer expectations. Maintain an in-depth knowledge of applicable Omani regulatory requirements. Modify and implement compliance tracking programs and record keeping systems. Provide and determine alternatives for issue resolution. Develop and work with site teams focused on EHS program development, implementation and improvementDrive accountability with all functions and associates to aggressively reduce accident and injuries.. Able to carry out risk, safety and hazard analysis.Apply ergonomic principles to improve workstations and minimize injuries.Develop and maintain excellent local and state agency relationships. Ability to work independently on the implementation of fault analyses and repair of wind turbine generator systems, including clarification of any client queries.. Planned and preventive maintenance of wind turbine generator systems.. Documenting of call-out responses, fault finding and repair work in service reports, logbooks and checklists. Management and documentation of corporate processes and IT-applications. Briefing/induction of external service provider and suppliers on site. Work for the continuous improvement of products and processes. Assistance of the technical leader of the area. Support in the development of training concepts
REQUIREMENTS:
Qualifications/REQUIREMENTS:. Degree in HSE from an accredited university or equivalent e.g. Nebosh; Occupational Health, Industrial Hygiene, Root Cause Analysis, Machine Safety, Law and Regulations, Chemical Safety, Manual Handling, Risk analysis, Fire Safety, Noise and Vibrations) or equivalent knowledge or experience or professional training in electrical, mechanical, mechatronics engineering (engineer or Diploma certificate).3 years experience leading environmental and safety compliance programs in a power plant environment. Proven experience with exposure to several EHS areas in the field environment. Great knowledge in local (Omani) EHS legislation. Medical fitness and willingness for work at height (Basic Safety Training would be a plus). Fluency in English, oral and written communication, presentation, training, and negotiation skills. Strong oral and written communication skills and strong interpersonal and leadership skills. Have a high energy level and the ability to energize others. Team player with strong interpersonal skills, capable of working within a diverse team. Ability to interface effectively with all levels within the company as well as organizations outside GE (regulatory agencies)Demonstrated knowledge of EHS and government regulations.Advanced computer skills and familiar with MS-Office(word, excel, ppt etc.).. Able to work at heights and high level of physical fitness.. Willing to work sometimes also at the weekends.. Valid Omani Driving licence. Social skills and ability to motivate staff and performance assessment. Technician or minimum 3 years practical experience in the power sectorDesired Characteristics:. NEBOSH qualified or regional EHS qualifications with proven experience in power generation sector/Oil and Gas/ FMCG/ Fertilizer sector etc.. Professional EHS certifications .Experience managing projects and/or EHS complianceTeam player with strong interpersonal skills. Electrical/ mechanical service or maintenance experience and willingness to work in troubleshooting of wind turbines will be an additional advantage.2019-08-22 15:50:54 |
Apply Now |
Business Development a Marketing Manager
INR7"YEARLY"
Business Development a Marketing ManagerFull Time (1-10 Yrs )Green Gulf Careers |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20On behalf of our client, we are seeking a Business Development and Marketing Manager for a well-established FMCG company.Responsibilities:Development of new customers in export markets particularly Far East & EuropeDevelopment of new channels, new customers in UAE/GCC marketsBrand positioning with HORECA & institutional customers particularly in UAEProduct development, market feasibility for new mushroom products.Mushroom packaging developmentEfficient air-shipping logistics to reach new distant markets at minimum costAir-freight negotiations with competing airlinesDevelop new marketing strategy to beat competition and increase market share in UAE/GCC marketsBrand development & positioningCold-chain management for perishable air-cargoEducation & awareness campaign in Oman to increase fresh mushroom consumption
REQUIREMENTS:
Expert understanding of global markets for fresh produce and supply logisticsExcellent communication skills & tech- savvySkilled in making business plans & strategies, product development, packaging, brand positioning, social mediaMaking presentations before top managementKnowledge of foreign languages a plusWell-traveled with international business network2019-08-22 15:50:41 |
Apply Now |
Sr Project Manager Civil
INR7"YEARLY"
Sr Project Manager CivilFull Time (1-10 Yrs )Gulf Enterprises Exports |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Focal point for liaising and communicating on technical and contractual issues on the project.Lead, coordinate and manage project team for execution of the works in accordance with the Contract Specifications, Standards, Statutory Authority Regulations and completion of all project activities on time, within the agreed cost and to HSE & Quality Standards as per the Contract.Compliance with the Companys policies, standards and procedures on the project.Plan, execute, monitor and control of all the project activities in accordance with the Baseline Program of Works, HSE Plan, Quality Plan and Change / Variation Control procedures. Implement necessary preventive and corrective actions for deviations / variances.Evaluate and develop construction methods for optimum utilization of manpower, plant & equipment and materials to meet the companys norms and standards and thereby ensure profitability.Assess and review the Key Performance Indicators for the project to provide periodic updates to the management. Propose and take preventive and corrective actions for maintaining the project completion on target and within the approved budget.Close-out of the project for obtaining Completion and Maintenance Certificates.
REQUIREMENTS:
20 years experience as Planning engineer on a minimum of two large residential / commercial building projects. Must possess good verbal, and written communication skills.Proficient with planning and scheduling software (Primavera). Gulf experience will be given preferenceBachelor of engineering/B. Tech Civil (IIT Preferred) RO 1500/- to RO 3500/-"Family Status + CarLeave Cycle - 2 Years/ 2 Month paid leave2019-08-22 15:50:36 |
Apply Now |
Project engineer- Process Solution
INR7"YEARLY"
Project Engineer- Process SolutionFull Time (3-8 Yrs )Project Engineer- Process Solution
Yokogawa Middle East |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Job PurposeTo perform the project detailed engineering, design, assembly and testing team of various Process Solution Project such as Advanced Process Control [APC], Operator Training Simulation [OTS], Plant Information management Systems [PIMS].Key Responsibilities & Accountabilities• Reviewing the Customer Project technical requirements, Specifications and Standards.
• Preparation of work procedures and hardware/ product specifications.
• Performing the detailed engineering, design, assembly and testing of the system as per the Customer requirements.
• Preparation of Bill of Material for various Systems.
• Coordination with Customer engineers for technical issues.
• Preparation and review of Purchase Order for various Projects Materials including cost control
• Coordination with Project Manager
• Document Control work
• Attending internal audit by QC engineer for Inspection and audit related activities.
• Attending Internal Meeting/ Project walk through for achieving Project milestones.
• Adhering to the Project Schedule & Project Quality Plan.
• Participating site acceptance test, commissioning and start-up activities.2019-08-22 12:51:45 |
Apply Now |
Network Security engineer
INR7"YEARLY"
Network Security EngineerFull Time (5-10 Yrs )Network Security Engineer
Yokogawa Middle East |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Job Purpose:-Network Security engineers/ Specialist major responsibility is takes care of the Network Security Solutions and Telecom Solutions Business for the processing industries. The selected candidate will be task to implement Network Security Solutions based on Yokogawa’s Best Practice guideline.
Key Responsibilities & Accountabilities• The Network Security engineer principal role is to lead initiatives to design and implement Cyber security architecture onto the manufacturing environment.• Candidate is expected to go to customer site and conduct site survey, meeting, create specification, implementation, Factory acceptance Test, site commissioning activity, and submit final documentation. Key skills and competencies for the right candidate
• Proven hands-on system engineering experience, preferably in the process control domain.
MCSE, CCNA certified.
• Excellent communications & Documentation skills.
Endpoint Protection:
McAfee ePO suite, ENS, VSE & Application Control (Whitelisting)
Symantec Endpoint Protection
• Microsoft Platform:
Active Directory Services, Group Policy, System Hardening.
WSUS patch management.
• Backup & Recovery:
Acronis, Symantec/Veritas etc.
Familiar with bare metal backup & recovery.
SAN, LTO Tape library setup.
• Networking:
Switching and routing on Cisco platform.
• Hardware:
HP, Dell, SAN, Tape Library2019-08-22 12:51:45 |
Apply Now |
Service engineer (Electrical - Level 1)
INR7"YEARLY"
Service Engineer (Electrical - Level 1)Full Time (2-3 Yrs )Service Engineer (Electrical - Level 1)
NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Skilled technicians competent to perform installation, commissioning and troubleshooting of products on site and provide corrective action necessary to achieve improved customer satisfaction.- Perform projects/jobs, which includes upgrading and/or installing products as well as repair/re-built product performance items- Investigate reported product problems and initiate corrective action following through on the corrective action requiredensuring successful implementation- Conduct operational analysis, make improvement recommendations and conduct retrofit management to assist in thedevelopment of products- Participate/assist in product design reviews through analyzing events, preparing review packages and recommending solutions as required.- Provide information and support all customers with equipment problems- Should be willing to drive company vehicle to customer locations and perform work if required.- Perform other work related task as required as assigned- Comply with all NOV Company and HSE procedures and policiesQualifications:- Bachelor's degree in Electrical engineering with 2 years experience in Oil&Gas sector.- Knowledge of drilling rig equipment/operations.- Good relationship with all Employees and Superiors- Good relationship with Client, Supplier & NOV global team members- Knowledge in Inspection, Measuring Instrument, Basic Computer knowledge in MS Office- Exposure to PLC, Java preferred.- Good report writing and communication skills- Able to read and interpret, drawings, diagrams2019-08-22 12:51:45 |
Apply Now |
Service engineer (Electrical - Level II)
INR7"YEARLY"
Service Engineer (Electrical - Level II)Full Time (5-6 Yrs )Service Engineer (Electrical - Level II)
NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Skilled technicians competent to perform installation, commissioning and troubleshooting of products on site and provide corrective action necessary to achieve improved customer satisfaction.- Perform projects/jobs, which includes upgrading and/or installing products as well as repair/re-built product performance items- Investigate reported product problems and initiate corrective action following through on the corrective action requiredensuring successful implementation- Conduct operational analysis, make improvement recommendations and conduct retrofit management to assist in thedevelopment of products- Participate/assist in product design reviews through analyzing events, preparing review packages and recommending solutions as required.- Provide information and support all customers with equipment problems- Should be willing to drive company vehicle to customer locations and perform work if required.- Perform other work related task as required as assigned- Comply with all NOV Company and HSE procedures and policiesQualifications:- Bachelor's degree in Electrical engineering or equivalent with 5 years experience in Oil&Gas sector- Knowledge of drilling rig equipment/operations.- Good relationship with all Employees and Superiors- Good relationship with Client, Supplier & NOV global team members- Knowledge in Inspection, Measuring Instrument, Basic Computer knowledge in MS Office- Exposure to PLC, Java preferred.- Good report writing and communication skills- Able to read and interpret, drawings, diagrams2019-08-22 12:51:45 |
Apply Now |
Service engineer (Mechanical - Level II)
INR7"YEARLY"
Service Engineer (Mechanical - Level II)Full Time (5-6 Yrs )Service Engineer (Mechanical - Level II)
NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Skilled technicians competent to perform installation, commissioning and troubleshooting of products on site and provide corrective action necessary to achieve improved customer satisfaction.- Perform projects/jobs, which includes upgrading and/or installing products as well as repair/re-built product performance items- Investigate reported product problems and initiate corrective action following through on the corrective action requiredensuring successful implementation- Conduct operational analysis, make improvement recommendations and conduct retrofit management to assist in thedevelopment of products- Participate/assist in product design reviews through analyzing events, preparing review packages and recommending solutions as required.- Provide information and support all customers with equipment problems- Should be willing to drive company vehicle to customer locations and perform work if required.- Perform other work related task as required as assigned- Comply with all NOV Company and HSE procedures and policiesQualifications:- Bachelor's degree in Mechanical engineering or equivalent with 5 years experience in Oil&Gas sector- Knowledge of drilling rig equipment/operations.- Good relationship with all Employees and Superiors- Good relationship with Client, Supplier & NOV global team members- Knowledge in Inspection, Measuring Instrument, Basic Computer knowledge in MS Office- Exposure to pneumatics/hydraulics.- Good report writing and communication skills- Able to read and interpret, drawings, diagrams2019-08-22 12:51:45 |
Apply Now |
Maintenance Refinery Position in Oman
INR7"YEARLY"
Maintenance Refinery Position in OmanFull Time (10-16 Yrs )Maintenance Refinery Position in Oman
Sofomation |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Dear Sir,Greetings!!We are - SOFOMATION - a human resource staffing agency providing highest standards of quality and professionalism. We pride ourselves on our efficient, professional and yet personal services both to our clients and applicants and our ability to supply the right staff complements the recruitment needs of our esteemed clients.Vacant position Available:
Team Leader Rotating (Maintenance)
Team Leader Static (Maintenance)
Team Leader Instrumentation (Maintenance)
Team Leader Electrical (Maintenance)
Supervisor Maintenance (Rotating, Static, Electrical, Instrumentation, Civil, fabrication & welding)
Senior Technician ((Rotating, Static, Electrical and Instrumentation, Civil, fabrication & welding)
Team Leader Planning (Maintenance)
Team Leader Warehouse
Team Leader Civil
Senior Planning
Supervisor Civil & Workshop
Senior Warehouse Specialist
Senior Performance Specialist
Team Leader / Sr. engineer– E&I Maintenance
Supervisor /Sr. Technician – E & I
Sr. Maintenance Planning engineer EDUCATION: Bachelor /Diploma is must
Refinery industry experience is mandatoryJob Location: OmanDirect hire with Refinery companyCandidates should have massive experience in Refinery Plant most specifically the following:
AREA A: Heavy Oils: Crude Distillation Unit (CDU) / Vacuum Distillation Unit (VDU) / Saturated Gas Plant (SGP) / LPG Treatment Unit (LTU) / Kerosene Treatment Unit (KTU) / Delayed Coker Unit (DCU) or Coke Handling
AREA B: Hydroprocessing: Hydro Cracker Unit (HCU) / Diesel Hydrotreating Unit (DHT) / Hydrogen Production Unit (HPU) / Pressure Swing Adsorption (PSA)
AREA C: Sulfur: Sulfur Recovery Unit (SRU) / Amine Recovery Unit (ARU) / Sour Water Stripping (SWS), UTILITIES (Waste Water Treatment Plant – WWTP)
AREA D: Offsite / Logistics / Solid HandlingKindly reply with Updated CV and below details:Speciality in which Area, kindly specify:
Position Applied for:
Total years of experience:
Years of Experience In refinery:
Current salary in USD per month (Basic):
Other Benefits:
Expected salary in USD per month (Basic):
Date of Birth:
Nationality:
Notice period:2019-08-22 12:51:41 |
Apply Now |
Welding engineer
INR7"YEARLY"
Welding EngineerFull Time (15-25 Yrs )Welding Engineer
Al Tasnim Enterprises LLC |
Muscat
,
Oman
Oman
0muscat
Sohar
,
Not Mentioned
sohar
0sohar
Salalah
,
Not Mentioned
salalah
0salalah
Suwaiq
,
Not Mentioned
suwaiq
0suwaiq
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-201. Review and approve vendors/ contractors proposed welding procedure specifications, construction welding procedure specifications and procedure qualification records.
2. Guiding Corrosion and materials departments on the material selection with respect to welding.
3. Advising and guiding Contractors in developing and qualifying welding procedure specifications.
4. Developing Welding specifications to ensure the integrity of equipment and facilities used in PDO.
5. Review and modification of existing welding specifications based on field experience and developments taking place in the O&G industry.
6. Carrying out failure analysis and finding solutions to welding related problems.
7. Maintain database of welding-related problems and their status.
8. Ensure effective management of welding operation and welding inspection personnel.
9. Planning, developing and qualifying new welding procedures for forthcoming jobs to ensure the integrity of equipment and facilities used in PDO.
10. Review and modification of existing welding specifications based on field experience and developments taking place in the oil and gas industry.
11. Carry out failure analysis and finding solutions to welding related problems.
12. Maintain a database of welding-related problems and their status.
13. Training and Qualifying welders in various processes through welding inspectors.
14. Maintaining records of all welders and ensure their qualification continuity.
15. Continuously monitoring the performance of the Welders through the feedback/reports received from Welding Inspection Personnel.
16. Guiding Welding Inspection Personnel in performing their tasks in an effective manner.
17. Analyze the welding-related non-conformances and resolve them by proper analysis.
18. Select the right consumables and guide for proper control of the consumables at the location.
19. Maintain and control all the records pertaining to welding including standard Procedure Qualification Records of PDO.
20. Audit Welding related activities periodically and appraise the QA-QC engineer / QA/QC Manager on potential non-conformances / improvements.
21. Review and approve vendors’ and subcontractors’ proposed welding procedure specifications, construction welding procedure specifications, and procedure qualification records.
22. Guide the Corrosion and Materials Departments on the material selection with respect to welding.
23. Welding engineer shall report to the Welding Manager/QA/QC Manager technically and administratively.2019-08-22 12:51:41 |
Apply Now |
Sales engineer–Lubricants & allied products (Oman)
INR7"YEARLY"
Sales Engineer–Lubricants & allied products (Oman)Full Time (2-3 Yrs )Sales Engineer–Lubricants & allied products (Oman)
Lobo Recruitment & Offshore LLP |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20- Should have minimum 2-3 years’ experience in Sales & Marketing of lubricants & allied products
- Young, dynamic and willing to take up tough challenges to achieve success in highly competitive market.
- With local driving license and GCC experience.
Please Note - Candidate should be available in Oman for Interview2019-08-22 12:51:39 |
Apply Now |
Planning engineer
INR7"YEARLY"
Planning EngineerFull Time (8-12 Yrs )Planning Engineer
Marvel HR Solutions FZ |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Vacancy for one of the leading Oil and gas company in Muscat.Job Experience- Maintenance & Operations in pumping station and generation station projects.Salary range- 550 OMR - 700 OMR2019-08-22 12:51:31 |
Apply Now |
Site Supervisor
INR7"YEARLY"
Site SupervisorFull Time (5-10 Yrs )Site Supervisor
Confidential Company |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20The Supervisor is responsible for the management of the Regular Services Crew at the PDO site in Oman and is expected to make a significant contribution to the strategic management of the power stations covered under the Contract.The Supervisor is also responsible in directing the weekly operational checks of remote Power Plants covered under the Contract, daily plant maintenance and repair of plant facilities and equipment.This job is on a rotation basis, 3 months ON and 1 month OFF.Main Duties and Responsibilities;•Control of all site related matters relating to the successful hook-up, installation and commissioning of the gas turbine and auxiliaries, its Control System, HMI/EWS interface to DCS, off-base cables and supports systems and ensuring site operations are in line with the budget
•Supervise Field Technicians and subcontractors for all site related issues
•Leads a team of multi-discipline Regular Services Crew (RSC) in conducting plant weekly operational checks on remote power stations
•Execute all site operations according to the company quality and HSE plans
•Promote engineering quality control, ensuring conformity to appropriate Gas Turbine engineering specifications in order to meet all customer and company requirements
•Supply a high level of technical support to client base and engineering staff
•Compiling and timely submission of detailed field reports
•Any other appropriate tasks as assigned by the Senior engineer
•To work safely and in accordance with all company Health, Safety and Environmental rules and recommendations, and be proactive in maintaining a safe working environment.2019-08-22 12:51:30 |
Apply Now |
Service engineer (Mechanical - Level III)
INR7"YEARLY"
Service Engineer (Mechanical - Level III)Full Time (12-13 Yrs )Service Engineer (Mechanical - Level III)
National Oilwell Varco |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Skilled technicians competent to perform installation, commissioning and troubleshooting of products on site and provide corrective action necessary to achieve improved customer satisfaction.- Perform projects/jobs, which includes upgrading and/or installing products as well as repair/re-built product performance items- Investigate reported product problems and initiate corrective action following through on the corrective action requiredensuring successful implementation- Conduct operational analysis, make improvement recommendations and conduct retrofit management to assist in thedevelopment of products- Participate/assist in product design reviews through analyzing events, preparing review packages and recommending solutions as required.- Provide information and support all customers with equipment problems- Should be willing to drive company vehicle to customer locations and perform work if required.- Perform other work related task as required as assigned- Comply with all NOV Company and HSE procedures and policies- Diploma in Mechanical engineering or equivalent with 12 years experience in Oil&Gas sector- Knowledge of drilling rig equipment/operations.- Good relationship with all Employees and Superiors- Good relationship with Client, Supplier & NOV global team members- Knowledge in Inspection, Measuring Instrument, Basic Computer knowledge in MS Office- Exposure to pneumatics/hydraulics.- Good report writing and communication skills- Able to read and interpret, drawings, diagrams2019-08-22 12:51:28 |
Apply Now |
Service engineer (Mechanical- Level 1) (Open for Omani Nationals Only)
INR7"YEARLY"
Service Engineer (Mechanical- Level 1) (Open for Omani Nationals Only)Full Time (6-7 Yrs )Service Engineer (Mechanical- Level 1) (Open for Omani Nationals Only)
NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Skilled technicians competent to perform installation, commissioning and troubleshooting of products on site and provide corrective action necessary to achieve improved customer satisfaction.- Perform projects/jobs, which includes upgrading and/or installing products as well as repair/re-built product performance items- Investigate reported product problems and initiate corrective action following through on the corrective action requiredensuring successful implementation- Conduct operational analysis, make improvement recommendations and conduct retrofit management to assist in thedevelopment of products- Participate/assist in product design reviews through analyzing events, preparing review packages and recommending solutions as required.- Provide information and support all customers with equipment problems- Should be willing to drive company vehicle to customer locations and perform work if required.- Perform other work related task as required as assigned- Comply with all NOV Company and HSE procedures and policiesQualifications:- Diploma in Mechanical engineering or equivalent with 6 years experience in Oil&Gas sector- Knowledge of drilling rig equipment/operations.- Good relationship with all Employees and Superiors- Good relationship with Client, Supplier & NOV global team members- Knowledge in Inspection, Measuring Instrument, Basic Computer knowledge in MS Office- Exposure to pneumatics/hydraulics.- Good report writing and communication skills- Able to read and interpret, drawings, diagram2019-08-22 12:51:28 |
Apply Now |
QA/QC engineer
INR7"YEARLY"
QA/QC EngineerFull Time (8-10 Yrs )QA/QC Engineer
Shella Consultants |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20QA/QC engineerJob Location : OmanJob Details :B.E / B.Tech Metallurgy or Mechanical with minimum 08 years of experience in Shutdown Refinery Maintenance in Oil and Gas Sector.CSWIP 3.1 or API 510 & 570 certified candidates preferred.2019-08-22 12:51:22 |
Apply Now |
Quantity Surveyor and site planning project co ordinator
INR7"YEARLY"
Quantity Surveyor and site planning project co ordinatorFull Time (3-8 Yrs )Quantity Surveyor and site planning project co ordinator
Peace Land Engineering Division |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Minimum 3 years experience in Petro chemical industry
Excellent knowledge in civil maintenance, Industrial painting, Industrial insulation and scaffolding
Excellent knowledge in Excel, word and E mail communication
Ability to interact with client engineers & managers for work acknowledgement
Cost control in and out materials
Direct involments in physical measurements from the site
Climb and enter the entire locations of plant to measure the measurements.2019-08-22 12:51:15 |
Apply Now |
Mud engineer
INR7"YEARLY"
Mud EngineerFull Time (10-11 Yrs )Mud Engineer
nes |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Mud engineer / Drilling Fluids ConsultantClient:A leading oilfield service company and they are currently looking for a number of Mud engineers / Drilling Fluid consultant for a 6 month contract. The role will be field based and will be on a 6 weeks on 3 weeks off bases in Oman.Experience Required:• Minimum of 10 years experience working within oilfield service and specialist within drilling fluids.• Expert in Oil Based Mud, knows the different chemical composition• Worked in the middle east before• Must be willing to work for the below Terms and conditions.2019-08-22 12:51:15 |
Apply Now |
Mechanical engineer
INR7"YEARLY"
Mechanical EngineerFull Time (6-8 Yrs )Mechanical Engineer
Shella Consultants |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Mechanical engineerJob Location : OmanRequirements :Candidate must have 6-8 years of exp in Oil and Gas IndustryCandidate must be working in Oil And Gas IndustryWorking experience as MECHANICAL engineer.2019-08-22 12:51:14 |
Apply Now |
Mechanical Site engineer
INR7"YEARLY"
Mechanical Site EngineerFull Time (6-12 Yrs )Mechanical Site Engineer
Pentascribe International |
Oman
,
Not Mentioned
oman
0oman
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
22-08-2019 2019-11-20Mechanical Site engineerJob Location : Saudi ArabiaRequirements :Minimum 6-12 Years experience in brown field mechanical construction and piping in oil & gas / refinery / petrochemical plant for review.Familiar with Aramco standards and experience will be an advantageSalary Negotiable Free Food Free Accommodation Free Transport Free Medical Free Insurance Free Ticket Paid Leaves Etc.2019-08-22 12:51:14 |
Apply Now |
Static Mechanical engineer
INR7"YEARLY"
Static Mechanical EngineerFull Time (5-6 Yrs )Static Mechanical Engineer
United Kingdom BP |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Job profile summary:Responsible for providing Static Mechanical expertise to projects or operations, including maintenance, inspection and turnaround, proactively interacting with other disciplines, teams, subfunctions and contractors to systematically resolve problems and applying sound engineering judgement to drive integrated, pragmatic solutions focused on risk management, operating efficiency, defect elimination and standardisation.Job Advert:Discover how our diverse, talented people are leading the way in making energy cleaner and better and how you can play your part in our world-class team.Join our team and advance your career as a/anStatic Mechanical engineerIf you join our team, you may have the following responsibilities:Accountable as the Equipment Class Owner (ECO) for delegated Region Static Mechanical Equipment Classes, e.g valves, pressure vessels, heat exchangers, flanged joints.Development and revision of delegated equipment class maintenance strategies.Supporting the Projects and Modifications Team by providing Mechanical engineering discipline reviews as needed to ensure small projects and modifications adhere to regulatory requirements, appropriate BP specifications, quality management requirements, and lifecycle operability standards.Supporting other Region Teams (e.g. AEST, TAR) by performance or review of complex or non-routine Mechanical engineering calculations and analyses that require deep discipline knowledge.Providing support for high risk discipline-related Management of Changes (MoC) or deviation requests to discipline technical practices.Participate in design reviews for Oman Region small projects and modifications that warrant strong Mechanical engineering discipline input.Provide Mechanical engineering expertise for incident investigations, RCFA, FMEA, and development of performance standards.Provide local Mechanical engineering interface support for brownfield GPO Projects.Provide Mechanical engineering expertise to support Fit for Service barrier evaluations, gap closure plans and improvements.Provide Mechanical engineering support for retirement, creation, or revision of site-specific engineering specifications.Provide Mechanical engineering technical input and review of complex, non-routine engineering procurement packages (e.g. critical valves, pressure vessels, process heat exchangers)Provide Mechanical engineering technical support for Region Category Management, SQM activities, and vendor/fabricator quality issues resolution.Identify opportunities for safety improvement, optimization and risk reduction across Region. Support hazard identification and risk assessment studies associated with revalidations, small projects, or modifications for existing assets (e.g.,MoCs, HAZOPs, LOPAs, HAZIDs, Human Factors Analysis and What-Ifs).Support or action assigned Region Mechanical engineering actions associated with HAZOP/ LOPA findings, HVL s, Alert bulletins, audit findings, traction activities, and complex engineering studies.Provide Mechanical engineering support in development of region-specific risk barrier diagrams (bow-ties) and Risk Action Plans (RAPs).Review and validate Mechanical engineering related incidents to ensure consistency in reporting and to identify Region-wide trends.Support Mechanical engineering learning by reviewing relevant incidents from BP or industry and proactively share lessons with Region and Global organizations.Record relevant learning in shared learning systems, incorporate in to local activities, specifications/practices/procedures and escalate high priority lessons.Support and participate in Region Mechanical engineering Discipline LCoP meetings, sharing lessons learned and sub-discipline trends & issues with others.Support Mechanical engineering training, mentoring, and development.In this role, we have the following requirements:Open for Omani nationals onlyBachelor degree in Mechanical engineer5 years of relevant professional experienceAbout BP:We are a global energy business involved in every aspect of the energy system. We have 75,000 employees in 80 countries, working towards delivering light, heat and mobility to millions of people, every day. We are one of the very few companies equipped to solve some of the big complex challenges that matter for the future. We have a real contribution to make to the world's ambition of a low carbon future. Join us, and be part of what we can accomplish together.BP is one of the world's leading international oil and gas companies. Through our work we provide customers with fuel for transportation, energy for heat and light, lubricants to keep engines moving, and the petrochemicals products used to make everyday items as diverse as paints, clothes and packaging. Our objective is to create value for shareholders and supplies of energy for the world in a safe and responsible way. We strive to be a safety leader in our industry, a world-class operator, a responsible corporate citizen and a good employer.Our Upstream segment is responsible for our activities in oil and natural gas exploration, field development and production, and midstream transportation, storage and processing.At the same time, we re investing in the talents of the 20,000 people who work to make these activities a reality.2019-08-22 12:51:08 |
Apply Now |
Occupational Health Advisor
INR7"YEARLY"
Occupational Health AdvisorFull Time (5-6 Yrs )Occupational Health Advisor
United Kingdom BP |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Job profile summary:Responsible for providing technical occupational health support to meet Operating Management System (OMS) and regulatory obligations using sounds technical capabilities, acting as point of contact for contract health service providers to verify that BP objectives and requirements are met, and supporting the delivery of occupational health programmes.Job Advert:Discover how our diverse, talented people are leading the way in making energy cleaner and better and how you can play your part in our world-class team.Join our team and advance your career as a/anOccupational Health AdvisorIf you join our team, you may have the following responsibilities:Provides/coordinates, monitors and evaluates risk-based occupational health programs and services to meet GOO/GWO /GPO, segment, OMS and regulatory health requirements.Supports GOO, GWO and GPO in the identification of health risks and the development and delivery of health facilities, competent staff, health programmes and systems to minimize the impact of risk. Facilitates health risk assessment for operation, projects, wells as required.Develops local OH procedures, work instructions, and training for, or requested by the region and interfaces with the Occupational Physician where appropriate.Under the direction of the Occupational Physician, supports the region in the management of fitness for work/task through health assessments, and health risk management programs (including health surveillance, drugs and alcohol, ergonomics and fatigue management, travel health, infection control and disease prevention, emergency medical response, etc.).Supports the region in the management of ill health through disability and case management programs and advises personnel, HR and line managers on aspects of sickness absence, rehabilitation and return to work. Provides consultancy for potential occupational illnesses and injuries, including appropriate monitoring and reporting.Promotes workplace health and well-being and provides strategic input to the Wellness program where applicable.Supports other medical / OH personnel (e.g. site medics) in their roles as required. Assists with recruitment, induction, training and development of health personnel.Conducts site OH visits and self -verification reviews.Collates and disseminates management information on the health status of the workforce and utilization of services. Supports occupational health service contracts as per company procurement standards and cost management strategies for efficient use of health resources and services.Compiles correspondence and reports to managers, external agencies and/or external health programs as required. Provide reporting of statistical data and health metrics as required OA - ReportingIn this role, we have the following requirements:Open for Omani nationals onlyQualified Occupational Health professional i.e. nurse or physician, holds or working towards recognized qualification of certificate/diploma/degree in occupational health.5 years of relevant professional experienceFundamental Principle of Industrial Hygiene and Fundamental Principle of Occupational Health is preferred.About BP:We are a global energy business involved in every aspect of the energy system. We have 75,000 employees in 80 countries, working towards delivering light, heat and mobility to millions of people, every day. We are one of the very few companies equipped to solve some of the big complex challenges that matter for the future. We have a real contribution to make to the world's ambition of a low carbon future. Join us, and be part of what we can accomplish together.BP is one of the world's leading international oil and gas companies. Through our work we provide customers with fuel for transportation, energy for heat and light, lubricants to keep engines moving, and the petrochemicals products used to make everyday items as diverse as paints, clothes and packaging. Our objective is to create value for shareholders and supplies of energy for the world in a safe and responsible way. We strive to be a safety leader in our industry, a world-class operator, a responsible corporate citizen and a good employer.Our Upstream segment is responsible for our activities in oil and natural gas exploration, field development and production, and midstream transportation, storage and processing.At the same time, we re investing in the talents of the 20,000 people who work to make these activities a reality.2019-08-22 12:51:08 |
Apply Now |
Mechanical Repair engineering - Rig Aftermarket (Omani Nationals Only)
INR7"YEARLY"
Mechanical Repair Engineering - Rig Aftermarket (Omani Nationals Only)Full Time (3-4 Yrs )Mechanical Repair Engineering - Rig Aftermarket (Omani Nationals Only)
NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20JOB PURPOSE:As Repair engineer (Mechanical) you will be responsible for reading andinterpreting mechanical drawings, positioning parts for assembly as well asperforming dis-assembly and assembly of mechanical components, reporting qualityissues of the day-to-day assembly and fitting of the full range of NOV Rig'sproduct line. You will support, improveand lead on-time repair of products through specific techniques as well as innovativeidea generation and creative, efficient problem solving. Your existing knowledge of best mechanicalengineering practices and hydraulic knowledge. Description: Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accuratelyassemble equipment and productsCarry out work instructions as given bySupervisor, e.g. work specifications, equipment operation.Monitor and control materials, productsor equipment to detect defects or faults.Identify product defects and completeappropriate documentation when defects are identifiedRework and/or repair assembledequipment and products according to engineering specification changesMaintain quality and quantity of production.Check workvia use of gauges, visuals and measuring toolsMaintain anorganised / visual workspace including inventory (5S understanding )Support keyinitiatives such as on time delivery, schedule attainment, cost of qualityGenerate andimplement improvement ideas and encourage idea generation among team membersand stop work for safety, stop production for quality, and escalate concernsBe familiarwith and use of proactive root cause problem solving (Fishbone etc.)Evaluate current production estimates and outputs.Support allNCR reporting.Support initiatives such as new techniques and products, purchases ofnew machinery.Attend daily team brief meetings, actively engaging in positivediscussions regarding potential problematic areas.Accurately describe events during quality related investigations, aidingthe Supervisor to understand the root cause where required.Willingly assist Supervisor to eradicate identified potential areas ofnon-conformance.Respond to identified process improvements and implement them willingly.Report discrepancies in job route times as soon as they are identified.Communicate them to the Supervisor and implement changes when requested.Strive to assist with maintaining all relevant KPIs in Safety, Quality,Cost, Delivery and Engagement whilst identifying areas for improvement.Action all tasks assigned to maintain high levels of target achievementas designated by Supervisor.Take part and contribute in toolbox talks.Demonstrate awareness of and promote company objectives, policies andprocedures.Ensure that all procedures/paperwork is completed, kept up to date andsigned off by the relevant person.Ensure all company policies surrounding, health & safety, qualityrequirements and housekeeping are met.Adheres to inspection criteria, policies and procedures withoutexception.Travel as and when required.Carry out other duties as and when business requirements dictate as maybe reasonably expected by line manager.General:- Any other day to day tasks as may be requiredQuality Assurance:- Carrying out all duties in accordance with the quality assurance procedures / departmental works instructions.Qualifications:QUALIFICATIONS: B Tech in Mechanical engineering.EXPERIENCE: Working knowledge within an assembly & manufacturing environment including the preparation of componentsWorking knowledge (3 year ) within a mechanical repair environment.SKILLS AND COMPETENCIES:• Computer literacy (including good command of Microsoft Office Excel, Word and Outlook).• Ability to read and interpret engineering drawings• Proficient in both written and spoken English2019-08-22 12:51:08 |
Apply Now |
QA/QC engineer (Exp. 9+ yrs.)
INR7"YEARLY"
QA/QC Engineer (Exp. 9+ yrs.)Full Time (9-10 Yrs )QA/QC Engineer (Exp. 9+ yrs.)
Client of Sofomation |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Job DetailsJob TitleQA/QC engineerIndustryOil & GasMain Function Areaengineering Oil / Gas / PetrochemicalSub Function AreaQA/QC engineerWork LocationMasqat, OmanCandidateProfileWork Experience9Years+Relevant Experience5Years+Highest QualificationBE/BTechOther QualificationMechanical engineeringJob SummaryMinimum 5 years experience in QA/QC mechanical with experience in GCCInternal Auditor / Lead Auditor ISO 9001 certificatesPiping / Pipeline / Structural and other mechanical equipment sOil and Gas and PowerSWIP /AWS or BGas certificationContact DetailsSend your CV s @jobs@sofomation.com2019-08-22 12:51:06 |
Apply Now |
Lead / Senior Piping engineer (Exp. 15+ yrs.)
INR7"YEARLY"
Lead / Senior Piping Engineer (Exp. 15+ yrs.)Full Time (15-16 Yrs )Lead / Senior Piping Engineer (Exp. 15+ yrs.)
Client of Sofomation |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Job DetailsJob TitleLead / Senior Piping engineerIndustryOil & GasMain Function Areaengineering Oil / Gas / PetrochemicalSub Function AreaPipingWork LocationMasqat, OmanCandidateProfileWork Experience15Years+Relevant Experience15Years+Highest QualificationB.E. OR B.Tec in MechanicalJob SummaryOil & Gas Construction Projects specially in Pipeline, at least 5 years as Senior Piping engineer in Pipeline (Oil & Gas) project. Minimum 3-4 years experience in GCC is a mustContact DetailsSend your CV s @jobs@sofomation.com2019-08-22 12:51:05 |
Apply Now |
Lead Planning engineer (Exp. 12+ yrs.)
INR7"YEARLY"
Lead Planning Engineer (Exp. 12+ yrs.)Full Time (12-13 Yrs )Lead Planning Engineer (Exp. 12+ yrs.)
Client of Sofomation |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Job DetailsJob TitleLead Planning engineerIndustryOil & GasMain Function Areaengineering Oil / Gas / PetrochemicalSub Function AreaPlanning / SchedulingWork LocationMuscat, OmanCandidateProfileWork Experience12Years+Relevant Experience5Years+Highest QualificationB.E. OR B.Tec in MechanicalJob SummaryExperience in project control, and planning & scheduling of construction activities of large scale project in oil & gas sector. At least 2 years of GCC experience is a must and familiar with prima vera latest version.Contact DetailsSend your CV s @jobs@sofomation.com2019-08-22 12:51:05 |
Apply Now |
Piping engineer (Exp. 20+ yrs.)
INR7"YEARLY"
Piping Engineer (Exp. 20+ yrs.)Full Time (20-21 Yrs )Piping Engineer (Exp. 20+ yrs.)
Client of Sofomation |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Job DetailsJob TitlePiping engineerIndustryOil & GasMain Function Areaengineering Oil / Gas / PetrochemicalSub Function AreaPipingWork LocationMasqat, OmanCandidateProfileWork Experience20Years+Relevant Experience20Years+Highest QualificationB.E. OR B.Tec in MechanicalJob Summary15 YEARS total experience. at least 8-10 years of oil & gas construction projects specially in pipeline of which at least 5 years as senior piping engineer in pipeline (oil & gas) project. Minimum 3-4 years experience in GCC is a MUSTContact DetailsSend your CV s @jobs@sofomation.com2019-08-22 12:51:05 |
Apply Now |
Project Control & Planning engineer (Exp. 5+ yrs.)
INR7"YEARLY"
Project Control & Planning Engineer (Exp. 5+ yrs.)Full Time (5-7 Yrs )Project Control & Planning Engineer (Exp. 5+ yrs.)
Client of Sofomation |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Job DetailsJob TitleProject Control & Planning engineerIndustryOil & GasMain Function Areaengineering Oil / Gas / PetrochemicalSub Function AreaPlanning / SchedulingWork LocationMuscat, OmanCandidateProfileJob DescriptionComputer Skill: Experience with Primavera planning is Must.Work Experience5Years+Relevant Experience0YearsHighest QualificationB.E. OR B.TecOther QualificationDegree (BE/ B-Tech) / Diploma in any engineering disciplineJob SummaryProvide cost & planning services in support of engineering, construction, commissioning & start-up (CSU) and maintenance.Develop in conjunction with project engineers, construction & maintenance engineers, activity plans for projects, construction services and CSU activities.Shall report to the relevant contractor lead project control & planning engineer, IAP planner and area construction or maintenance coordinator for day-day activities.Computer Skill: Experience with Primavera planning is Must.Contact DetailsSend your CV s @jobs@sofomation.com2019-08-22 12:51:05 |
Apply Now |
HSE Supervisor and HSE engineer
INR7"YEARLY"
HSE Supervisor and HSE EngineerFull Time (6-8 Yrs )HSE Supervisor and HSE Engineer
Shella Consultants |
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20HSE Supervisor and HSE engineerJob Location : OmanRequirements :Candidate must have 6-8 years of exp in Oil and Gas IndustryCandidate must be working in Oil And Gas IndustryWorking experience as HSE SUPERVISOR OR engineer.2019-08-22 12:50:56 |
Apply Now |
Commissioning engineer - Control & Automation - R-029967
INR7"YEARLY"
Commissioning Engineer - Control & Automation - R-029967Full Time (10-16 Yrs )Commissioning Engineer - Control & Automation - R-029967
SNC-Lavalin |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20Job DescriptionTo coordinate the onsite commission and startup of control & automation equipment & provide specialist knowledge and advice to both client and subcontractor.Principal AccountabilitiesProvide specialist knowledge and advice relating to control & automation, cause and effective testing, complex loop checking,
Loop tuning
Logic modification, logic troubleshooting.
Partake in walk-downs & verification of subsystem handover
Progress reporting
Coordination with other disciplines
Partake in client and subcontractor meetings
Integration testing.
Perform hands-on commissioning in both Greenfield and Brownfield environments.
Industrial communication / networking.
Subsystem handover and management
Verification of check sheets & verification of completed work.
Lead and participate in HSSE Safety Leadership walk downs / workshops
Lead and participate in Flawless Delivery Leadership walk downs / workshops
Demonstrate personal HSSE leadership and excellent HSE behavior at all times, and ensure that safety expectations are communicated and maintained.
Attend all mandatory training as specified in HSE, and Permit To Work training schedule, and to act as Performing and/or Area Authority
Act as Company Representative at all times reporting to site CSU Lead but not be limited to site, liaising with PDO engineering teams if and when required but also with close liaison with key vendor specialists.
Lead Subsystem handover and management for your discipline
Attend and execute the Site Acceptance Testing (SAT) when required.
Ensure all packages have clear defined preservation requirements identified and applied.
Responding to engineering site queries where clarification of design is required and liaise with engineering contractor where a response to TQ’s as required.
Ensuring that commissioning procedures and paperwork is completed to enable a smooth hand over of systems to Operations.2019-08-22 12:50:35 |
Apply Now |
Instrumentation engineer
INR7"YEARLY"
Instrumentation EngineerFull Time (7-14 Yrs )Instrumentation Engineer
Bahwan Engineering Group |
Duqm
,
Not Mentioned
duqm
0duqm
Oman
Not Mentioned
oman
0oman
|
22-08-2019 2019-11-20• Responsible for site activity day to day scheduling and achievement to meet customer satisfaction with proper safety at site i.e. overall site work monitoring and reporting.
• Overall control on Supervisors, workforce and Organization erection material & Equipment.
• Three week look ahead, daily activity scheduling and deputing the workforce; Coordination with Main contractor.
• Review all project Drawings, specifications and ITPs and evaluate with actual site conditions; if required prepare STQ to engineering Department.
• Attend Daily and Weekly Progress meeting with Main Contractor and Client.
• Coordination with other subcontractors for early releasing of work fronts and Clarence/handover.
• Leader for preparing the Test Packages/loop folders and Handover Documentation.
• Overall Responsible for safety and Quality of work and workforce.2019-08-22 12:50:34 |
Apply Now |
Data Network engineer
INR7"YEARLY"
Data Network EngineerFull Time (1-10 Yrs )Page Europa |
Oman
Not Mentioned
oman
0oman
|
21-08-2019 2019-11-19SUMMARY:The Data Network engineer is an expert specialized in LAN/WAN systems, wired and wireless, within high level complex integrated projects. The role has the following peculiarities:- Capability to work in a multicultural environment and interface internal and external stakeholders.- The engineer can act as system engineer, lead engineer, project engineering manager depending from the project and the experience.- Capability to work closely with vendors and stakeholders to deploy solutions from design to user acceptance.- Capability to provide System engineering services such as system design, implementation, configuration and commissioning.ROLE DESCRIPTION:-Specialized in network engineering, this role will provide network system engineering, design, configuration and implementation.-Ability to define and implement the design of a network system in compliance to established system architecture, project specifications and drawings, security policies, standards and best practices, and ability to author and maintain support documentation-Provisioning of technical services for new system proposals including Bill Of Material implementation and system optimization advices-Preparation of technical documentation such as System Description, System Manual, System Specification, etc..-Capability to coordinate with the CAD department by providing all the required inputs for the production of documents such as General Arrangement, System Block Diagrams, System Interconnection, preliminary detailed design engineering drawings including as-built drawings, etc.-Active participation in meeting with customers, consultants, manufacturers and other technical personnel.-Ability to create detailed technical design specifications and use cases.
REQUIREMENTS:
QUALIFICATIONS:-Expert working knowledge of networking and routing protocol such as TCP/IP, OSPF, LAN switching including VLANs, VLAN aggregation, LAG, LACP, VRRP, PVLANs, Spanning Tree, 802.1X, 802.1Q.-Expert working knowledge of firewall technologies including IPSEC/SSL VPN, ACL, App & User-ID, and firewall management tools.-Experience in working with cabling infrastructure vendors.-Extensive experience with Juniper portfolio including JUNOS, EX switching and SRX firewall and Palo Alto Networks firewall.-Experience with Cisco IOS, Nexus switches, ASA firewalls, ISR Routers.-Experience with IP telephony is a plus.-Experience with various tools including SNMP monitoring, Syslog, packet capturing (Wireshark), NetBrain, network load testing, and application performance.-Proficient Pc Skills Including Word Processing, Spreadsheet, Project And Presentation Software, Excel, PowerPoint, Visio.-Experience in working with Cisco Commerce Workspace.EDUCATION:-Bachelors degree in Telecommunication engineering or equivalent (required).EXPERIENCE:-7+ Years in Large Scale Network System Design, Implementation, Site Supervision and Commissioning.CERTIFICATION:-CCNA or equivalent (required).-CCNP or equivalent (preferred skill).LANGUAGE SKILLS:-English (fluent written and spoken) is required.-Arab (preferred skill).ADDITIONAL SKILLS:-Teamwork skills, Communication Skills, Presentation and Facilitating skills.2019-08-21 16:07:40 |
Apply Now |
Radio System engineer
INR7"YEARLY"
Radio System EngineerFull Time (1-10 Yrs )Page Europa |
Oman
Not Mentioned
oman
0oman
|
21-08-2019 2019-11-19SUMMARY:-The Radio System engineer is an expert specialized in Radio systems, within high level complex integrated projects. The role has the following peculiarities:-Capability to work in a multicultural environment and interface internal and external stakeholders.-The engineer can act as system engineer, lead engineer, project engineering manager depending from the project and the experience.-Capability to work closely with vendors and stakeholders to deploy solutions from design to user acceptance.-Capability to provide System engineering services such as system design, implementation, configuration and commissioning.ROLE DESCRIPTION:-Specialized in Radio Systems engineering, this role will provide System engineering, design, configuration and implementation.-engineer will be able to define and implement the design of a Radio system in compliance to established system architecture, project specifications and drawings, security policies, standards and best practices, and author and maintain support documentation-engineer will provide technical services for new system proposals including Bill Of Material implementation and system optimization advices-engineer will be also able to provide technical documentation such as System Description, System Manual, System Specification, etc.-engineer will give all the required inputs for the production of documents such as General Arrangement, System Block Diagrams, System Interconnection, preliminary and as-built drawings, etc-engineer will participate in meeting with customers, consultants, manufacturers and other technical personnel.-engineer will work in a team of engineers and will coordinate with them when required.
REQUIREMENTS:
QUALIFICATIONS:-Knowledge of the RF propagation in the HF (ground wave and ionospheric), VHF, UHF and higher ranges for LOS and VSAT connections implementation-Capability to select the proper Radio System devices (Antennas, RF Cables, Lighting protection, Connectors, etc.) in order to design the System in full compliance with the specifications-Knowledge of the main Tools and Software for coverage study and link budget analysis (i.e. Radio mobile, Pathloss, Vocap, ASAPS 6 or NEC)-Knowledge of DMR (TIER II and TIER III) technology and related devices configuration (repeater, radio, Server, etc.)-Knowledge of the TETRA technology and related devices configuration (repeater, radio, Server, etc.)-Working knowledge of Data Communications and Network Systems appropriate to Radio Systems.-Capability to estimate the impact of a mutual interference among different antennas, (even if they are part of different systems) coexisting in a given area in order to provide optimization of the system design.-Knowledge of Radar Technology-Proficient Pc Skills Including Word Processing, Spreadsheet, Project and Presentation Software, Excel, PowerPoint, VisioEDUCATION:-Bachelors degree in Telecommunication engineering or equivalent (required).EXPERIENCE:-4+ years working knowledge of Radio Communications including HF, VHF, UHF and Trunk radio Systems (Portable, Mobiles, repeaters, Base Stations). Design, Implementation, Site Supervision and CommissioningCERTIFICATION:-Specific Radio System Certifications (e.g. vendors certifications)LANGUAGE SKILLS:-English (fluent written and spoken) is required.-Arab (preferred skill).ADDITIONAL SKILLS:-Teamwork skills, Communication Skills, Presentation and Facilitating skills.2019-08-21 16:07:39 |
Apply Now |
ELV engineer
INR7"YEARLY"
ELV EngineerFull Time (1-10 Yrs )Page Europa |
Oman
Not Mentioned
oman
0oman
|
21-08-2019 2019-11-19SUMMARY:-The ELV engineer is an expert specialized in Security/Special/Audio-Video systems for high level complex integrated projects. The role has the following peculiarities.-Capability to work in a multicultural environment interfacing internal and external stakeholders.-The engineer can act as system engineer, lead engineer, project engineering manager it depends from the project and the experience.-Capability to provide System engineering services such as system design, implementation, configuration and commissioning.-Capability to work closely with vendors and stakeholders to deploy solutions from design to user acceptance.-Capability to work in a Team of engineers and coordinate with them when required.ROLE DESCRIPTION:-Ability to define and implement the design of a system in compliance to established system architecture, project specifications and drawings, security policies, standards and best practices and ability to author and maintain all the related support documentation.-Deep understanding of a system specification in order to implement the system and select the related devices accordingly.-Provisioning of technical services for new system proposals including Bill Of Material implementation and system optimization.-Preparation of technical documentation such as System Description, System Manual, System Specification, etc.-Capability to coordinate with the CAD department by providing all the required inputs for the production of documents such as General Arrangement, System Block Diagrams, System Interconnection, preliminary detailed design engineering drawings including as-built drawings, etc.-Active participation in meeting with customers, consultants, manufacturers and other technical personnel.-Ability to create detailed technical design specifications and use cases.
REQUIREMENTS:
QUALIFICATIONS:-Specific Security System Certifications (e.g. vendors certifications).-Knowledge of main Devices, Topologies, Architectures, Signals Transmission Technologies and main Vendors of Security Systems such as CCTV, IDS, PIDS, ISMS, VMS, PAGA, UVSS/ANPR, F&G, Gate Management, Thermal Imaging.-Knowledge of PLC and knowledge of Power Distribution Systems is a plus.-Working knowledge of Data Communications and Network Systems appropriate to Security Systems.-Experience in design of one or more of the following platforms (Lenel, Genetec, Milestone, Tyco, CEM, Synectics, , Honeywell).-System analysis and design experience in mapping user problems to reusable design and technology solutions-Good understanding of design tools as well as development tools and technologies to help in implementation of rapid prototypes or to solve integration problems.-Knowledge of application, database, operating system, and network issues for both clients and servers with a variety of operating systems, server hardware, and network topologies.-Proficient PC Skills Including Word Processing, Spreadsheet, Project And Presentation Software, Excel, PowerPoint, Visio.EDUCATION:-Bachelors degree in Telecommunication engineering or equivalent (required).EXPERIENCE:-6+ years working knowledge of Security Systems including Physical Security and Control Automation Systems for Design, Implementation, Site Supervision and Commissioning.CERTIFICATION:-Specific Security System Certifications (e.g. vendors certifications).LANGUAGE SKILLS:-English (fluent written and spoken) is required.-Arab (preferred skill).ADDITIONAL SKILLS:-Teamwork skills, Communication Skills, Presentation and Facilitating skills.2019-08-21 16:07:39 |
Apply Now |
Tendering and Procurement engineer
INR7"YEARLY"
Tendering and Procurement EngineerFull Time (4-10 Yrs )Talentz Hunter |
Oman
Not Mentioned
oman
0oman
|
20-08-2019 2019-11-18Tendering and Procurement engineerJob Location : OmanJob Details :Candidate must have experience in Tendering, Cost control, Estimation, Material Sourcing of Mechanical,E&I, Civil Products.Gulf Experience must.Well versed in Pivot Table, etc...Well known about Dubai Market.2019-08-20 16:03:31 |
Apply Now |
ELV Sr.Sales Solutions engineer
INR7"YEARLY"
ELV Sr.Sales Solutions EngineerFull Time (0-10 Yrs )HARWEEL INTEGRATED |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
17-08-2019 2019-11-15Job DescriptionHARWEEL is currently looking for an experienced Senior Sales Executive for ELV, Electronic Security Solutions Division. Reporting to the Head of Operations, the successful candidate will be responsible for generating new business for ELV electronic security. The incumbent will ensure revenue growth. He/she will also be responsible for addition of new customers, complaint resolution and managing client’s expectations.
Â
This role will focus specifically on LV, ELV and ICT related projects.This role will form an integral part of their team by supporting for bid submissions, tender proposals for future projects.
Â
Requirements
Electrical engineering DegreeProven track record of tendering successfully for GCC based projects (ideally buildings orientated)5 to 10 years’ experience of tendering / bidding experience, ideally on Mid Scale commercial, residential and industrial projects.Must have LV, ELV and ICT related project experience
Â
Role Responsibility:
Ensure delivery of services to the clients as per their expectations and in accordance with the contractual obligations, thus contributing to the growth of the Company.Improve and implement laid down policies, systems and procedures for smooth conduct of Sales and Implementations with the specific aim of providing high quality service to our clients across the country.Responsible for the recurring business for Maintenance services for ESS division and will be tasked to grow the business in line with the aggressive targets to deliver year on year growth in both turnover and margin.Develop short and long term business strategies for delivering the key objectives.Accomplish human resource objectives by recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising, and reviewing job contributions; planning and reviewing compensation actions; enforcing policies and proceduresMeets financial objectives by forecasting requirements; invoicing projections; scheduling expenditures; analyzing variances; initiating corrective actions.Develop & Lead a multi cultural team of Sales personnel, engineers, technicians and helpers.Enhances department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments
 2019-08-17 12:27:49 |
Apply Now |
Technician Aircraft intenance Third Party a Tech Support Oni
INR7"YEARLY"
Technician Aircraft intenance Third Party a Tech Support OniFull Time (1-10 Yrs )Oman Air |
Oman
Not Mentioned
oman
0oman
|
16-08-2019 2019-11-14-Responsible for provision of basic ground handling services to all Company and contracted parties as per maintenance requirements.-Ensure to follow instructions issued by Lead- Charge hand and carry out the work as required.-Ensure that all manuals and publications are maintained in good order and kept up to date to the last revision.-Ensure that all tools and equipment used are operated correctly, safely and maintained in good working condition, update tool list as per EPM.-Responsible for tool control of tool box in his possession report any missing tools as per EPM.-Record and maintain respective records for all maintenance work carried out.-Ensure-Perform Aircraft arrival and pre departure checks, walk around and carry out snag rectification as required by the Licensed engineer attending the aircraft-Maintain a current permanent record of tools and equipment in accordance with procedure.-Assist in the training and development of Omani National staff placed under his control.-Report any unserviceability of equipment or tooling or occurrences, to his Charge hand.-Ensure adequate pre work preparation is carried out to ensure efficient work process.-Adhere to the Airport Authorities rules and company procedures and regulations.-Record all delays and incidence-accidents occurrence on the required forms and submit to the Lead charge hand or his deputy for his action to completion.-Adhere to the HSE-administration-disciplinary policies of the company.-Carry out Aircraft maintenance and rectification work as directed by immediately reporting personnels.-Undertake any other task as instructed by immediate Supervisor.-Ensure-responsible to keep tool box at allocated place after attending aircraft.-Responsible to maintain equipments clean by disposing off used items-FODs in the rubbish bins after attending allocated aircraft.
REQUIREMENTS:
-Two years college Diploma in Aircraft Maintenance engineering-OR EASA Certificate of Recognition in category B1.1-OR ICAO Type II LWTR-For Non Omanis any one of the above with 04 years experience as Technician Aircraft.2019-08-16 16:06:39 |
Apply Now |
Sales engineer
INR7"YEARLY"
Sales EngineerFull Time (5-10 Yrs )Universal Overseas Consultants |
Oman
Not Mentioned
oman
0oman
|
16-08-2019 2019-11-14Sales engineerJob Location : OmanJob Details :Minimum 5 years of experience in selling of Pipes & Pipe Fittings and other Mechanical products.Dip / B.TECH Mechanical engineering candidates can apply.Salary range - 300 - 400 OMR ,Depend upon experience. Free Accommodation Yearly once ticket provide by the company.2019-08-16 13:17:21 |
Apply Now |
Sales engineer & Sr. Sales engineer
INR7"YEARLY"
Sales Engineer & Sr. Sales EngineerFull Time (3-8 Yrs )Al Hashar Group |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
16-08-2019 2019-11-141. Prospecting
2. Site inspection / application study & preparation of offer
3. Presentation of suitable products
4. Knowledge of Cost of ownership / Life cycle costLocation of posting:Muscat / Sohar / Salalah / Ibri / Sur / Nizwa2019-08-16 13:16:27 |
Apply Now |
Purchase engineer
INR7"YEARLY"
Purchase EngineerFull Time (7-10 Yrs )Voltech HR Services Pvt Ltd |
Oman
Not Mentioned
oman
0oman
|
14-08-2019 2019-11-12Job Description :Minimum of 7 years' experience in Purchase / Procurement with Oil & Gas Background.Proven negotiation skills with vendor management capabilities.Ability to lead a large team of cross functional engineers/ Managers to deliver projects on time costInterested candidates can apply your resume.2019-08-14 16:13:27 |
Apply Now |
Civil Planning engineers
INR7"YEARLY"
Civil Planning EngineersFull Time (15-20 Yrs )Seagull International |
Oman
Not Mentioned
oman
0oman
|
14-08-2019 2019-11-12Civil Planning engineersJob Location : OmanJob Details : Oil & Gas Exp. to -15 Years in Planning & Project controls in EPC Projects in Refinery, Power Plant and Oil & Gas Sector Planning engineer, Familiar with soft-ware like Primavera, MSP, Power point etc.Interested candidates can apply with your resume.2019-08-14 16:00:24 |
Apply Now |
Hydraulic Design engineer
INR7"YEARLY"
Hydraulic Design EngineerFull Time (2-5 Yrs )Renardet |
Muscat
,
Oman
Oman
0muscat
Oman
,
Not Mentioned
oman
0oman
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
13-08-2019 2019-11-11Renardet is looking for a Hydraulic Design engineer for its branches located in Muscat (Oman) and Riyadh (Saudi Arabia)Expected starting date: as soon as possibleMinimum Qualifications Requirements:• BSc or MSc Degree in Civil or Environmental engineering• 2-5 years experience in road drainage design, culvert sizing, bridge hydraulic analysis including scouring calculations• Experience with Autocad, Civil 3D, HEC-HMS, Aquaveo WSM , HEC-RAS (1D and 2D), HY-8, and ArcGIS or other open source GIS• Proficiency in English language• Strong technical, verbal, written and interpersonal skills2019-08-13 13:18:17 |
Apply Now |
Site Supervisor
INR7"YEARLY"
Site SupervisorFull Time (5-10 Yrs )Confidential Company |
Oman
Not Mentioned
oman
0oman
|
12-08-2019 2019-11-10The Supervisor is responsible for the management of the Regular Services Crew at the PDO site in Oman and is expected to make a significant contribution to the strategic management of the power stations covered under the Contract.The Supervisor is also responsible in directing the weekly operational checks of remote Power Plants covered under the Contract, daily plant maintenance and repair of plant facilities and equipment.This job is on a rotation basis, 3 months ON and 1 month OFF.Main Duties and Responsibilities;•Control of all site related matters relating to the successful hook-up, installation and commissioning of the gas turbine and auxiliaries, its Control System, HMI/EWS interface to DCS, off-base cables and supports systems and ensuring site operations are in line with the budget
•Supervise Field Technicians and subcontractors for all site related issues
•Leads a team of multi-discipline Regular Services Crew (RSC) in conducting plant weekly operational checks on remote power stations
•Execute all site operations according to the company quality and HSE plans
•Promote engineering quality control, ensuring conformity to appropriate Gas Turbine engineering specifications in order to meet all customer and company requirements
•Supply a high level of technical support to client base and engineering staff
•Compiling and timely submission of detailed field reports
•Any other appropriate tasks as assigned by the Senior engineer
•To work safely and in accordance with all company Health, Safety and Environmental rules and recommendations, and be proactive in maintaining a safe working environment.2019-08-12 15:21:11 |
Apply Now |
Operations Maintenance Coordinator
INR7"YEARLY"
Operations Maintenance CoordinatorFull Time (5-6 Yrs )Client of Petroplan Aberdeen |
Oman
Not Mentioned
oman
0oman
|
12-08-2019 2019-11-10JOB DESCRIPTIONOperations Maintenance CoordinatorPURPOSE:Coordinates, interfaces and approves all maintenance activity for all the operations area, unit and process at Client's under Operations Area Team Leader scope, acting as central point of accountability and contact for all maintenance related activities at the designed area for the maintenance work plus operations activities needed to prepare equipment for maintenance, including the issuance of permit to work, and return of equipment to service through: (1) Interfaces with Operations and Complex Manager (to ensure high quality work notifications are written clearly, equipment is ready for hand over to Maintenance as scheduled, safe work permits are ready when Maintenance crews show up to work, and equipment is returned to service, (2) Interfaces with Operations and Maintenance to ensure all maintenance work is appropriately risk ranked, planned, and scheduled, (3) Chairs the daily risk ranking meeting with Maintenance and Operations to appropriately risk rank and prioritize work, (4) Interfaces with Maintenance Scheduler to ensure maintenance work is scheduled at the optimal time (once work is scheduled only the OMC can break the schedule), and (5) Shares KPIs with Area Manager and Maintenance Manager, in order to ensure an incident and injury free work place, team-work and collaboration among Operations and Maintenance such that work notifications are well written, operators care for equipment to maximise performance and time between repairs, maximize plant safety, availability, and efficiency, for the quality delivery of products.Operation Maintenance Coordinator (OCM) position will act in accordance with Client's values and strategies, policies, guidelines, technology platform, HSE standards, Omani's government and other legal justification's, and best international practices in consonance with national objectives and Ethics standards.Education Requirements:Minimum Qualifications for this position is a Diploma in engineering or similar (preferably mechanic or electric and instrumentation specialization)Minimum Requirements:Minimum of 5 years relevant experience as Maintenance Coordinator, Maintenance Planner, Maintenance engineer, Operator Day Supervisor, or Operator Shift Supervisor within oil & gas refinery and Petrochemical industry. Knowledge of the Refining process and plant equipment.Experience in supporting the installation of at least one SAP system for maintenance management on behalf of the Operations team.The incumbent must have good communication skills in verbal and written English. Display calmness under pressure, ability to focus on team prioritiesSeasoned maintenance coordinator or operators shift supervisor, with in depth expertise in one or several of the following processes:• Heavy Oils: Crude Distillation Unit (CDU) / Vacuum Distillation Unit (VDU) / Saturated Gas Plant (SGP) / LPG Treatment Unit (LTU) / Kerosene Treatment Unit (KTU) / Delayed Coker Unit (DCU)• Hydroprocessing: Hydro Cracker Unit (HCU) / Diesel Hydrotreating Unit (DHT) / Hydrogen Production Unit (HPU) / Pressure Swing Adsorption (PSA)• Sulfur: Sulfur Recovery Unit (SRU) / Amine Recovery Unit (ARU) / Sour Water Stripping (SWS) /• Utilities: Waste Water Treatment Plant (WWTP)• Offsite / Logistics / Solid HandlingAbout Petroplan:Petroplan is a global organisation which specialises in connecting skilled professionals with exceptional contract and permanent career opportunities throughout the oil, gas and energy industry. This has been our focus since Petroplan was formed in 1976.Our company aim isn't to be the largest industry recruitment specialist but rather the best. As such, our recruitment services, contractor management and specialised support is tailored to meet the individual needs of candidates, contractors and clients. Petroplan's local offices across Europe, the Middle East, North America, Asia-Pacific, Africa and Australasia support projects throughout forty countries. Our client portfolio includes multi-national companies, together with niche organisations focusing on a specialist discipline or location.For more information please feel free to visit our website http://petroplan.com2019-08-12 15:21:11 |
Apply Now |
Site engineer - Solar
INR7"YEARLY"
Site Engineer - SolarFull Time (2-5 Yrs )Hussam Technology Company |
Oman
Not Mentioned
oman
0oman
|
12-08-2019 2019-11-10The Site engineer (SE) is a pivotal member of the Solar Solutions Team. The SE is expected to have had 2-5 years of hands on experience with the full cycle of interaction with solar design team, design comprehension, project management, scope break-down, resource mapping, HSE coordination, execution, team management, logistics management, customer
and local supply coordination and site documentation while adhering to ISO 9001. Additionally, Training and supervising technical leads, quality control and modifications to engineering drawings to match as-built conditions.2019-08-12 15:21:10 |
Apply Now |
Technician - Aircraft Maintenance
INR7"YEARLY"
Technician - Aircraft MaintenanceFull Time (2-3 Yrs )Oman Air |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
12-08-2019 2019-11-101. Responsible for provision of basic ground handling services to all Company and contracted parties as per maintenance requirements.2. Ensure to follow instructions issued by Lead/ Charge hand and carry out the work as required.3. Ensure that all manuals and publications are maintained in good order and kept up to date to the last revision.4. Ensure that all tools and equipment used are operated correctly, safely and maintained in good working condition, update tool list as per EPM.5. Responsible for tool control of tool box in his possession report any missing tools as per EPM.6. Record and maintain respective records for all maintenance work carried out.7. Ensure/Perform Aircraft arrival and pre departure checks, walk around and carry out snag rectification as required by the Licensed engineer attending the aircraft8. Maintain a current permanent record of tools and equipment in accordance with procedure.9. Assist in the training and development of Omani National staff placed under his control.10. Report any unserviceability of equipment or tooling or occurrences, to his Charge hand.11. Ensure adequate pre work preparation is carried out to ensure efficient work process.12. Adhere to the Airport Authorities rules and company procedures and regulations.13. Record all delays and incidence/accidents occurrence on the required forms and submit to the Lead charge hand or his deputy for his action to completion.14. Adhere to the HSE/administration/disciplinary policies of the company.15. Carry out Aircraft maintenance and rectification work as directed by immediately reporting personnel s.16. Undertake any other task as instructed by immediate Supervisor.17. Ensure/responsible to keep tool box at allocated place after attending aircraft.18. Responsible to maintain equipment s clean by disposing off used items/FODs in the rubbish bins after attending allocated aircraft.2019-08-12 15:20:42 |
Apply Now |
Construction engineer (Electrical)
INR7"YEARLY"
Construction Engineer (Electrical)Full Time (8-10 Yrs )Seagull International |
Oman
Not Mentioned
oman
0oman
|
09-08-2019 2019-11-07Construction engineer (Electrical)Job Location : OmanJob Details :Degree/Diploma in Electrical engineeringMinimum of 8 year experience in Oil & Gas construction and pre commissioning activities in the Large engineering & construction organization.Fluent spoken and written English.Good interpersonal and communication skill. Able to motivate a team within matrix type organization.Must have sound basic skills in relevant branch of engineering.Good knowledge of on site HSE Management.Computer literate.Good management skill.Familiar with design and engineering standards. Read and understand drawings.2019-08-09 13:19:48 |
Apply Now |
Processing engineer-3D
INR7"YEARLY"
Processing Engineer-3DFull Time (9-15 Yrs )Indman DMCC |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
09-08-2019 2019-11-07• Creating Mesh 3D Models using Bentley Context Capture Software – Point cloud data
• 3D data modeling based on ESRI (ArcGIS, ArcScene)
• Creating Vector 3D Models with all the superstructures of the buildings
• Create Real textured models of multiple buildings
• LOD3 (Level of Detail) covers building height – building footprint – roof construction detail – texture of building and roof construction with real texture extracted from the newly captured images
• Optimization of 3D to be used on Web based applications
• DTM - Digital Terrain Model & GSD - Geometric Scene Description2019-08-09 13:19:36 |
Apply Now |
Sales Coordinator, Omani only
INR7"YEARLY"
Sales Coordinator, Omani onlyFull Time (2-3 Yrs )Al Bustan Palace, A Ritz-Carlton Hotel |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04At more than 80 award-winning properties worldwide, The Ritz-Carlton Ladies and Gentlemen create experiences so exceptional that long after a guest stays with us, the experience stays with them. As the premier worldwide provider of luxury experiences, we set the standard for rare and special luxury service the world over. We invite you to explore The Ritz-Carlton.Job SummaryPerform general office duties to support Sales & Marketing (e.g., filing, sending emails, typing, faxing, copying). Prepare sales-related documents throughout the sales process (e.g., proposals, contracts, or banquet event orders). Promote awareness of brand image internally and externally. Gather materials and assemble information packages (e.g., brochures, promotional materials). Use sales techniques that maximize revenue while maintaining existing guest loyalty to Marriott. Enter, retrieve, reconcile, and verify information (e.g., commissions, leads, third parties) in software involved in the sales process. Answer guest questions about property facilities/services (e.g., hours of operation, rates and room types, packages, promotions, entertainment, restaurants, special events). Serve as the point of contact for clients and communicate with them by phone and email to respond to questions and requests.Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests' service needs; thank guests with genuine appreciation. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Comply with quality assurance expectations and standards. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.The Ritz-Carlton is an equal opportunity employer committed to hiring a diverse workforce and sustaining an inclusive culture. The Ritz-Carlton does not discriminate on the basis of disability, veteran status or any other basis protected under federal, state or local laws.2019-08-06 16:43:20 |
Apply Now |
Sr. Telecom Commissioning engineer
INR7"YEARLY"
Sr. Telecom Commissioning EngineerFull Time (14-20 Yrs )Superiority of Modern Services LLC(SOMS) |
Muscat
,
Oman
Oman
0muscat
Al Batinah
,
Not Mentioned
al batinah
0al batinah
Ash Sharqiyah
,
Not Mentioned
ash sharqiyah
0ash sharqiyah
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04• 14-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on fractionation columns, LPG/NGL extraction, Gas compression, gas processioning • 14-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on cryogenic tanks (propane, propylene, ethylene, LNG), Boil of gas compression unit, propane/ propylene chilling packages.o Development & execution of the project facility commissioning & startup activities through the review of and input to the EPC contractorso Facilitate the final handover of the facility to the operations teamso Development of commissioning and operations procedures with the EPC contractor.2019-08-06 16:43:19 |
Apply Now |
Sr. Mechanical Commissioning engineer (Rotating)
INR7"YEARLY"
Sr. Mechanical Commissioning Engineer (Rotating)Full Time (14-20 Yrs )Superiority of Modern Services LLC(SOMS) |
Muscat
,
Oman
Oman
0muscat
Al Batinah
,
Not Mentioned
al batinah
0al batinah
Ash Sharqiyah
,
Not Mentioned
ash sharqiyah
0ash sharqiyah
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-0414-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on fractionation columns, LPG/NGL extraction, Gas compression, gas processioning• 14-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on cryogenic tanks (propane, propylene, ethylene, LNG), Boil of gas compression unit, propane/ propylene chilling packages. Some of key responsibilities.o Development & execution of the project facility commissioning & startup activities through the review of and input to the EPC contractorso Facilitate the final handover of the facility to the operations teamso Development of commissioning and operations procedures with the EPC contractor, vendor.2019-08-06 16:43:19 |
Apply Now |
Sr. Mechanical Commissioning engineer (Static)
INR7"YEARLY"
Sr. Mechanical Commissioning Engineer (Static)Full Time (14-20 Yrs )Superiority of Modern Services LLC(SOMS) |
Muscat
,
Oman
Oman
0muscat
Al Batinah
,
Not Mentioned
al batinah
0al batinah
Ash Sharqiyah
,
Not Mentioned
ash sharqiyah
0ash sharqiyah
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-0414-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on fractionation columns, LPG/NGL extraction, Gas compression, gas processioning• 14-20 years of experience, minimum of 8 years of experience in commissioning, start-up & handover• Experience on cryogenic tanks (propane, propylene, ethylene, LNG), Boil of gas compression unit, propane/ propylene chilling packages.o Development & execution of the project facility commissioning & startup activities through the review of and input to the EPC contractorso Facilitate the final handover of the facility to the operations teamso Development of commissioning and operations procedures with the EPC contractor, Facilitate the final handover of the facility to the operations teamso Development of commissioning and operations procedures with the EPC contractor, vendor.2019-08-06 16:43:19 |
Apply Now |
Planning engineer
INR7"YEARLY"
Planning EngineerFull Time (8-12 Yrs )Marvel HR Solutions FZ |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Vacancy for one of the leading Oil and gas company in Muscat.Job Experience- Maintenance & Operations in pumping station and generation station projects.Salary range- 550 OMR - 700 OMR2019-08-06 16:43:18 |
Apply Now |
Structural engineer - Design/Construction - Hospital
INR7"YEARLY"
Structural Engineer - Design/Construction - HospitalFull Time (15-26 Yrs )CG resourcing |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Required to join an international engineering consultancy working on the construction of the hospital in Muscat. The successful candidate will be responsible for the management of Structural engineering Design on this project, This includes•Reviews, evaluates and approve design submissions, drawings, calculations, material submissions, method statements and documents for accuracy and contractual compliance with the applied standards and specifications.
•Verifies that Employer Requirements, applicable codes and engineering standard practices are being met.
•Specifying, designing and analyzing new and existing structural systems utilizing engineering standards and specialist tools and software, including computer-aided design systems.
• Create engineering drawings and technical specifications for Client designs/works/methods/processes
as requested
•Resolves issues or problems concerning conflicting design requirements, specifications and/or difficult interface/coordination requirementsApplicants should meet the following criteria15 +years of experience in RCC structural engineering design and analysis works. Experience in the design of structural building systems including multi-storey buildings, heavy civil structures, hospitals, commercial, educational buildings, and other infrastructure projects (minimum 10 years’ experience in a design consultancy company). Experience in steel construction works is an added value.Extensive working experience on design development of Hospitals/Healthcare facilities•Sound experience and thorough knowledge of structural engineering design and code requirements supported with good design experience with the latest UK health related standards (such as HBN and HTM).•Fully conversant with relevant international standards. Highly experienced in working with the latest international technical standards for structural works, current industry Standards, Codes of Practice and best practice.Conversant with and experienced working within BIM modelling environmentSound experience in conceptual, front end (preliminary) and detailed design development and review.•Highly experienced in using various international structural design software’s for structures, bridges and tunnels such as AutoCAD, Midas, SAP, Civil Design.2019-08-06 16:43:17 |
Apply Now |
Manufacturing engineer
INR7"YEARLY"
Manufacturing EngineerFull Time (1-4 Yrs )Oman Bolts |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Need experienced person in nut bolt manufacturing unit, with knowledge of all materials SS, MS, GI, HDG all grades of nut bolts manufacturing,2019-08-06 16:43:16 |
Apply Now |
Urgent Requirement of Inspection engineer- Muscat, Oman
INR7"YEARLY"
Urgent Requirement of Inspection Engineer- Muscat, OmanFull Time (3-7 Yrs )Confidential Company |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04• Responsible for managing the overall process of functional and visual inspection of the vehicles
• Identify mechanical, electrical, or cosmetic defects in vehicle; take necessary actions to resolve any imperfections and estimate costs for repairs
• Ensure vehicle meets highest quality standards.2019-08-06 16:43:16 |
Apply Now |
Planning engineer
INR7"YEARLY"
Planning EngineerFull Time (5-10 Yrs )Al Turki Enterprises LLC |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Planning engineerJob Location : OmanJob Description :Proficient with planning and scheduling software PrimaveraTechnical awareness of civil electro-mechanical and architectural works drawings and specificationsPrepare micro level construction program loaded with resources as per targets and milestones prescribed by client and revise as per current status of work progress for each phase based on the project planMonitor critical activities based on the project schedule and advise project managementPrepare and submit updated work program and cash flow curve showing actual progress and identify areas of weakness and establishes meansInterested candidates can send their CV.2019-08-06 16:43:14 |
Apply Now |
Project Manager/Head of Water Supply Design Department
INR7"YEARLY"
Project Manager/Head of Water Supply Design DepartmentFull Time (10-11 Yrs )Renardet |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04The engineer will be responsible for the water supply sector and will manage planning, permitting, design and construction related projects mainly in water transmission and distribution systems.Duties include client interaction, technical coordination of the projects, mentoring of junior engineers, report writing, cost estimating, hydraulic analysis, proposal preparation including scope definition and fee estimates, project management including budget and schedule tracking.The engineer should start working as soon as possible.2019-08-06 16:43:14 |
Apply Now |
Mechanical engineer
INR7"YEARLY"
Mechanical EngineerFull Time (5-16 Yrs )Dairy Company |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Urgently required "Mechanical engineer" for a well established Dairy firm at Oman.1. Salary: - Minimum of 1000 OMR.Salary can be raised as per the candidates experience.Free food, free accommodation, life insurance, health insurance, 2 way ticket yearly, 30 days paid leave, 5 working days / 2 days off weekly,annual bonus as per performance2. Job PurposeThis position is responsible for designing, testing, perfecting and maintaining products, machinery and equipment. The role helps establish plant maintenance policies, procedures and flow charts for all mechanical, hydraulic and diesel-powered equipment and includes resolving motor, pump, conveyor and hydraulic problems. The position is also responsible for layout, fits, welding fabricated components to assemble structural forms and ensure maintenance of the same3. Main Tasks & Account abilitiesTask Description Key Result Areas Support productionEvaluate all engineering drawings andEnsure adequate support to process ensure implementation according to production with reduced engineering (mechanical) specifications instances of equipmentDesigning, testing, perfecting andBreakdowns maintaining products, machinery and Address breakdowns equipment urgently to get productionEnsure mechanical operations, back on track standards and controls are maintained at high qualityOversee performing of all fabrication/welding work including molding fixtures as requiredCheck equipment and operating systems and correct wherever necessaryAnalyzing machine test results using diagnostic software to make adjustments for optimal performanceEnsure Meticulous Records of Machine Service History are maintained PreventiveDesign, implement and maintainPlanned maintenance and Maintenance preventive as well as predictive scheduled shutdown.JOB DESCRIPTIONMaintenance programs with the help of maintenance schedules with the maintenance team associated timelinesRepair and perform preventiveLower instances of maintenance on machines as per unscheduled shutdown established standards to avoid machine leading to reduced downtime production losses CurativeInvestigate and resolve technicalAddress faults in equipment Maintenance problems within stipulated timelines with and machines in a time the help of a competent team bound mannerOversee diagnosing the issue for malfunctioning machines, and ensure repair work within stipulated timeHelp troubleshoot electrical controls for machines Quality controlMonitor and control maintenanceEnsure plant and equipment standards for the section function as per documentedEvaluate finished products and perform performance standards quality checks on productsAssemble old units and perform modification and repair work if required Hygiene,HealthMonitoring work environment for hazardsSafe workplace for and Safety and maintain healthy ventilation levels to employees compliance avoid particle or gas inhalationAccountable for meeting theFollowing safety protocol, including overall safety,quality,and wearing heat-resistant gloves, protective performance objectives masks, and safety shoes including implementing bestEnsuring occupational health and safety practices related to the compliance as mandated by the plant function policies and government regulationsImplement all company policies particularly with respect to hygieneManage all state & federal compliance issues i.e. lock out/tag out, confined space, etc.Responsible for all mechanical engineering section safety related matters Team BuildingEnsure an optimized work force in termsEnsure creation/timely Planning, of quantity and quality updating of staffing plan acquisition andEffective communication within andCreate and develop a high mentoring outside the team performing team, holding selfCreate a supportive environment for the and others accountable for team members resultsContribute to the team, letting others know information that may be useful or importantHelp to create a fun, supportive work environment PeopleEnsure accurate and up to date, daily,Effective coordination across management and weekly, monthly records as required by functions to achieve targets reporting the management.responsibilitiesEnsure tasks are understood by the team members, and performed responsibly and diligentlyHelp others in the team if needed; Support relief staff in their duties7. Person Specification (Qualifications, Knowledge & Experience)7.1: Education Level BTech / engineering degree in Mechanical engineering Minimum Requirement7.2: Professional MBA (Manufacturing / Operations Management) preferredQualifications have a valid driver s license7.3: Work Experience Overall experience of 7 years or more in manufacturing withminimum of five (5) years Plant (Mechanical) Maintenanceexperience in an FMCG company/agribusinessExperience in overseeing manufacturing of dairy products will be preferredExperience with cultured products is a huge plusStrong understanding of the Middle East especially Oman3 JOB DESCRIPTION7.4: Job Specific Skills Ability to work in adverse weather conditionsIntimate knowledge of mechanical maintenance requirementsin agribusiness/dairy/FMCG production environmentCapacity to create and implement plant maintenance (mechanical) plans at the production siteExperience with GMP, Quality, Environmental, Safety, and Employment Standards regulatory requirementsAbility to deal with operational challenges in a production environmentFinancial awareness to understand and interpret numbers Excellent written & verbal communication / presentationTeam player with excellent motivational skills7.5 Generic Skills Must be alert, strive for accuracy, and have ability to exercise independent thinking and judgment, be a self- motivator, and attention to detailDisplays cultural, gender, religion, race, nationality and age sensitivity and adaptabilityIntegrity, discretion and loyalty2019-08-06 16:43:14 |
Apply Now |
Electrical Design engineer - Solar
INR7"YEARLY"
Electrical Design Engineer - SolarFull Time (4-6 Yrs )Hussam Technology Company |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04The Design engineer (DE) is a pivotal member of the Solar Solutions Team. The DE is expected to have had 4-6 years of hands on experience with the full cycle of Solar Design, from conceptualisation, detailed design, procurement recommendation, and supporting site execution. This includes but is not limited to designing the PV Design using tools such as PVsyst, Helioscope, Mounting system design, documentation while adhering to ISO 9001, AutoCAD and Sketch-up usage for content creation, SLD generation, cable sizing, interacting with vendors and customers, creating technical feasibility studies utilising the team under their disposal. Detailed knowledge of system components is a must. Knowledge of DG (diesel generators) and hybrid PV is a bonus we would value.2019-08-06 16:43:14 |
Apply Now |
Road Design engineer
INR7"YEARLY"
Road Design EngineerFull Time (2-5 Yrs )Renardet |
Muscat
,
Oman
Oman
0muscat
Oman
,
Not Mentioned
oman
0oman
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
06-08-2019 2019-11-04Renardet is looking for a Road Design engineer for its branches located in Muscat (Oman) and Riyadh (Saudi Arabia)Minimum Qualifications Requirements:• BSc or MSc Degree in Civil or Environmental engineering• 2-5 years experience in road drainage design, culvert sizing, bridge hydraulic analysis including scouring calculations• Experience with Autocad, Civil 3D, HEC-HMS, Aquaveo WSM , HEC-RAS (1D and 2D), HY-8, and ArcGIS or other open source GIS• Proficiency in English language• Strong technical, verbal, written and interpersonal skills2019-08-06 16:43:14 |
Apply Now |
Bridge Design engineer
INR7"YEARLY"
Bridge Design EngineerFull Time (5-10 Yrs )Renardet |
Muscat
,
Oman
Oman
0muscat
Oman
,
Not Mentioned
oman
0oman
Riyadh
,
Saudi Arabia
Saudi Arabia
0riyadh
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
06-08-2019 2019-11-04Renardet is looking for a Bridge Design engineer for its branches located in Muscat (Oman) and Riyadh (Saudi Arabia)Expected starting date: as soon as possibleMinimum Qualifications Requirements:• BSc or MSc Degree in Civil engineering / Structural engineering• 5-10 years experience in the design of river bridges and interchanges• Should be proficient in Voided Slab Structure, PSC Girder Slab Bridges, Box Girder Bridges, open and pile foundation with sound knowledge of AASHTO Code• Should be familiar with main structural design softwares like Maidas, SAP2000, CSi Bridge, Prokon, STAAD, etc• Proficiency in English language• Having GCC /Oman experience will be an added advantage• Strong technical, verbal, written and interpersonal skills2019-08-06 16:43:14 |
Apply Now |
Quantity Surveyor and site planning project co ordinator
INR7"YEARLY"
Quantity Surveyor and site planning project co ordinatorFull Time (3-8 Yrs )Peace Land Engineering Division |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Minimum 3 years experience in Petro chemical industry
Excellent knowledge in civil maintenance, Industrial painting, Industrial insulation and scaffolding
Excellent knowledge in Excel, word and E mail communication
Ability to interact with client engineers & managers for work acknowledgement
Cost control in and out materials
Direct involments in physical measurements from the site
Climb and enter the entire locations of plant to measure the measurements.2019-08-06 16:43:13 |
Apply Now |
Draftsman - Piping (For Chennai)
INR7"YEARLY"
Draftsman - Piping (For Chennai)Full Time (1-4 Yrs )Composite Pipes Industry LLC (binuraju@cpioman.com) |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Prepare all project related or non-project related drawings inline with the designs providing by the technical support engineer. He is also responsible for issuing all drawings to provide client and other departments with the required details in a comprehensible form.2019-08-06 16:43:13 |
Apply Now |
Jr engineer
INR7"YEARLY"
Jr EngineerFull Time (4-8 Yrs )Premier Travels |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Requirements :BE/Diploma - Civil with PDO Earthwork Experience,Should have 4 - 8 years experience in same fieldBenefits : Free Food & Accommodation, Yearly once vacationInterested candidates can send their CV.2019-08-06 16:43:13 |
Apply Now |
Site engineer - Solar
INR7"YEARLY"
Site Engineer - SolarFull Time (2-5 Yrs )Hussam Technology Company |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04The Site engineer (SE) is a pivotal member of the Solar Solutions Team. The SE is expected to have had 2-5 years of hands on experience with the full cycle of interaction with solar design team, design comprehension, project management, scope break-down, resource mapping, HSE coordination, execution, team management, logistics management, customer
and local supply coordination and site documentation while adhering to ISO 9001. Additionally, Training and supervising technical leads, quality control and modifications to engineering drawings to match as-built conditions.2019-08-06 16:43:13 |
Apply Now |
Network Presales engineer
INR7"YEARLY"
Network Presales EngineerFull Time (3-8 Yrs )Computer Network Systems (www.cns-me.com) |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Job Purpose:
Responsible to manage all aspects of Network and Communications solution portfolio lifecycles. Provides Pre Sales and Solution Design support for Network and Communications to Sales and Services. Stays abreast of trends in the Network and Communications marketplace to ensure the solutions competitive position.
Job Responsibilities:
Manage the Network and Communications Portfolio
? Maintain the existing Network and Communications solution portfolio
? Propose new solution portfolio based on market and innovation trends
? Provide Network and Communications pre-sales solution support internally.
Provide Pre Sales and Solution Design Support
? Provide pre-sales support Sales and Customers.
? Support sales with accurate solution information, configurations, and presentations.
? Support with the scope of demo’s and proof of concepts and follow up on the progress.
Manage Partnerships with Vendors
? Maintaining the relationship with the principals on technical issues and pricelists
? Provide presales support Sales and Customers with Vendors.
? Engagement with Vendors on all aspects of the partnerships
? Manage Vendor Certifications
Provide Pre Sales and Solution Design Support to Services.
? Interact with the service department to ensure alignment on Solutions.
? Support Implementation team technically and during customer meetings and support the full implementation process from a technical angle till the solution goes to mainstream support.
General
? Ensure quality of the Pre Sales department
? Protect company interest at all times.
? Strive for continuous improvement in the department processes so that these align with the changing business needs of the company.2019-08-06 16:43:12 |
Apply Now |
Job opening for Sales engineer (SMATV/IP Systems) for Oman
INR7"YEARLY"
Job opening for Sales Engineer (SMATV/IP Systems) for OmanFull Time (3-8 Yrs )Le Human Resources Solutions Pvt Ltd |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Bachelor’s Degree Required and/or relevant experience
A minimum of 3-4 years of experience as an Electronics Sales engineer
Ability to understand, present and demonstrate Multimedia/ IP System products and services to end user customers
Experience in handling brands like Ikusi, Philips, WISI, TRIAX , Televe’s, - IPTV system For Hotel system
Knowledge SMATV/IP system Design standards & practices, software tools&essential2019-08-06 16:43:11 |
Apply Now |
Project engineer - MEP
INR7"YEARLY"
Project Engineer - MEPFull Time (10-16 Yrs )Al Tasnim Enterprises LLC |
Muscat
,
Oman
Oman
0muscat
Salalah
,
Not Mentioned
salalah
0salalah
Suwaiq
,
Not Mentioned
suwaiq
0suwaiq
Khasab
,
Not Mentioned
khasab
0khasab
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-041. Checks IFC drawings with the tender drawings
2. Compares discrepancies in drawings and BOQ and brings to the notice of Quantity surveyor
3. Take off quantities from the drawings, check quantities with BOQ
4. Works-out drawing schedule with the Chief Draughtsman for submission to the Consultants. Ensure shop drawing for technical compliance and to contractual obligation of Contractor
5. Keeps a track of all cost variations and works closely with the QS and Client/Consultant for engineering Instruction (EI)
6. Attends Weekly / Fortnightly progress review meetings
7. Follows all contract document procedures and maintains record of the same
8. Follows up with Consultants for drawings and material approvals
9. Ensures that all letters are responded to in time and prompt letters are written for all contractual implication on project
10. Carries out Heat Load calculations, Duct/Pipe Sizing, check and verify the design including ESP/Static head calculations
11. Keeps records of all the verbal instruction issued by the consultant / client by generating “Confirmation of Verbal instructions” and follow up with consultant for converting the same into an E.I.
12. Follows up with the consultants for an E.I. before proceeding with the procurement of the material where variations are involved
13. Raises queries to the Consultants for non-clarity of work in the drawings
14. Prepares and submit Material Approval Submittals for all items to be used on the project for approval from Consultant
15. Follows up with draughtsman and ensure all “As-Built” Drawings are submitted immediately upon completion of the works
16. Orders all materials through SAP in time and ensure that the same is delivered to meet the program schedule through regular follow-ups with vendors
17. Creates, maintains & updates formats such as Material tracking schedule, drawing status schedule, MAS schedule, RFI schedule, PI schedule, etc.
18. Prepares O&M Manuals
19. Responsible for testing, commissioning and handing over of all documents required for the same to the Consultant for approval2019-08-06 16:43:11 |
Apply Now |
Sales engineer–Lubricants & allied products (Oman)
INR7"YEARLY"
Sales Engineer–Lubricants & allied products (Oman)Full Time (2-3 Yrs )Lobo Recruitment & Offshore LLP |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04- Should have minimum 2-3 years’ experience in Sales & Marketing of lubricants & allied products
- Young, dynamic and willing to take up tough challenges to achieve success in highly competitive market.
- With local driving license and GCC experience.
Please Note - Candidate should be available in Oman for Interview2019-08-06 16:43:11 |
Apply Now |
Service engineer (Mechanical - Level II)
INR7"YEARLY"
Service Engineer (Mechanical - Level II)Full Time (5-6 Yrs )NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Skilled technicians competent to perform installation, commissioning and troubleshooting of products on site and provide corrective action necessary to achieve improved customer satisfaction.- Perform projects/jobs, which includes upgrading and/or installing products as well as repair/re-built product performance items- Investigate reported product problems and initiate corrective action following through on the corrective action requiredensuring successful implementation- Conduct operational analysis, make improvement recommendations and conduct retrofit management to assist in thedevelopment of products- Participate/assist in product design reviews through analyzing events, preparing review packages and recommending solutions as required.- Provide information and support all customers with equipment problems- Should be willing to drive company vehicle to customer locations and perform work if required.- Perform other work related task as required as assigned- Comply with all NOV Company and HSE procedures and policiesQualifications:- Bachelor's degree in Mechanical engineering or equivalent with 5 years experience in Oil&Gas sector- Knowledge of drilling rig equipment/operations.- Good relationship with all Employees and Superiors- Good relationship with Client, Supplier & NOV global team members- Knowledge in Inspection, Measuring Instrument, Basic Computer knowledge in MS Office- Exposure to pneumatics/hydraulics.- Good report writing and communication skills- Able to read and interpret, drawings, diagrams2019-08-06 16:43:09 |
Apply Now |
Service engineer (Mechanical - Level III)
INR7"YEARLY"
Service Engineer (Mechanical - Level III)Full Time (12-13 Yrs )NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Skilled technicians competent to perform installation, commissioning and troubleshooting of products on site and provide corrective action necessary to achieve improved customer satisfaction.- Perform projects/jobs, which includes upgrading and/or installing products as well as repair/re-built product performance items- Investigate reported product problems and initiate corrective action following through on the corrective action requiredensuring successful implementation- Conduct operational analysis, make improvement recommendations and conduct retrofit management to assist in thedevelopment of products- Participate/assist in product design reviews through analyzing events, preparing review packages and recommending solutions as required.- Provide information and support all customers with equipment problems- Should be willing to drive company vehicle to customer locations and perform work if required.- Perform other work related task as required as assigned- Comply with all NOV Company and HSE procedures and policiesQualifications:- Diploma in Mechanical engineering or equivalent with 12 years experience in Oil&Gas sector- Knowledge of drilling rig equipment/operations.- Good relationship with all Employees and Superiors- Good relationship with Client, Supplier & NOV global team members- Knowledge in Inspection, Measuring Instrument, Basic Computer knowledge in MS Office- Exposure to pneumatics/hydraulics.- Good report writing and communication skills- Able to read and interpret, drawings, diagrams2019-08-06 16:43:09 |
Apply Now |
Service engineer (Electrical - Level II)
INR7"YEARLY"
Service Engineer (Electrical - Level II)Full Time (5-6 Yrs )NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Skilled technicians competent to perform installation, commissioning and troubleshooting of products on site and provide corrective action necessary to achieve improved customer satisfaction.- Perform projects/jobs, which includes upgrading and/or installing products as well as repair/re-built product performance items- Investigate reported product problems and initiate corrective action following through on the corrective action requiredensuring successful implementation- Conduct operational analysis, make improvement recommendations and conduct retrofit management to assist in thedevelopment of products- Participate/assist in product design reviews through analyzing events, preparing review packages and recommending solutions as required.- Provide information and support all customers with equipment problems- Should be willing to drive company vehicle to customer locations and perform work if required.- Perform other work related task as required as assigned- Comply with all NOV Company and HSE procedures and policiesQualifications:- Bachelor's degree in Electrical engineering or equivalent with 5 years experience in Oil&Gas sector- Knowledge of drilling rig equipment/operations.- Good relationship with all Employees and Superiors- Good relationship with Client, Supplier & NOV global team members- Knowledge in Inspection, Measuring Instrument, Basic Computer knowledge in MS Office- Exposure to PLC, Java preferred.- Good report writing and communication skills- Able to read and interpret, drawings, diagrams2019-08-06 16:43:09 |
Apply Now |
Service engineer (Electrical - Level 1)
INR7"YEARLY"
Service Engineer (Electrical - Level 1)Full Time (2-3 Yrs )NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Skilled technicians competent to perform installation, commissioning and troubleshooting of products on site and provide corrective action necessary to achieve improved customer satisfaction.- Perform projects/jobs, which includes upgrading and/or installing products as well as repair/re-built product performance items- Investigate reported product problems and initiate corrective action following through on the corrective action requiredensuring successful implementation- Conduct operational analysis, make improvement recommendations and conduct retrofit management to assist in thedevelopment of products- Participate/assist in product design reviews through analyzing events, preparing review packages and recommending solutions as required.- Provide information and support all customers with equipment problems- Should be willing to drive company vehicle to customer locations and perform work if required.- Perform other work related task as required as assigned- Comply with all NOV Company and HSE procedures and policiesQualifications:- Bachelor's degree in Electrical engineering with 2 years experience in Oil&Gas sector.- Knowledge of drilling rig equipment/operations.- Good relationship with all Employees and Superiors- Good relationship with Client, Supplier & NOV global team members- Knowledge in Inspection, Measuring Instrument, Basic Computer knowledge in MS Office- Exposure to PLC, Java preferred.- Good report writing and communication skills- Able to read and interpret, drawings, diagrams2019-08-06 16:43:09 |
Apply Now |
Service engineer (Mechanical- Level 1)
INR7"YEARLY"
Service Engineer (Mechanical- Level 1)Full Time (6-7 Yrs )NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Skilled technicians competent to perform installation, commissioning and troubleshooting of products on site and provide corrective action necessary to achieve improved customer satisfaction.- Perform projects/jobs, which includes upgrading and/or installing products as well as repair/re-built product performance items- Investigate reported product problems and initiate corrective action following through on the corrective action requiredensuring successful implementation- Conduct operational analysis, make improvement recommendations and conduct retrofit management to assist in thedevelopment of products- Participate/assist in product design reviews through analyzing events, preparing review packages and recommending solutions as required.- Provide information and support all customers with equipment problems- Should be willing to drive company vehicle to customer locations and perform work if required.- Perform other work related task as required as assigned- Comply with all NOV Company and HSE procedures and policiesQualifications:- Diploma in Mechanical engineering or equivalent with 6 years experience in Oil&Gas sector- Knowledge of drilling rig equipment/operations.- Good relationship with all Employees and Superiors- Good relationship with Client, Supplier & NOV global team members- Knowledge in Inspection, Measuring Instrument, Basic Computer knowledge in MS Office- Exposure to pneumatics/hydraulics.- Good report writing and communication skills- Able to read and interpret, drawings, diagram2019-08-06 16:43:09 |
Apply Now |
Diesel Engine Mechanic
INR7"YEARLY"
Diesel Engine MechanicFull Time (5-10 Yrs )Hyster Oman |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Global renowned Forklift truck company requires a diesel engine mechanic with knowledge of hydraulic and forklifts with valid gulf driving license2019-08-06 16:43:09 |
Apply Now |
Mechanical Repair engineering - Rig Aftermarket (Omani Nationals Only)
INR7"YEARLY"
Mechanical Repair Engineering - Rig Aftermarket (Omani Nationals Only)Full Time (3-4 Yrs )NOV |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04JOB PURPOSE:As Repair engineer (Mechanical) you will be responsible for reading andinterpreting mechanical drawings, positioning parts for assembly as well asperforming dis-assembly and assembly of mechanical components, reporting qualityissues of the day-to-day assembly and fitting of the full range of NOV Rig'sproduct line. You will support, improveand lead on-time repair of products through specific techniques as well as innovativeidea generation and creative, efficient problem solving. Your existing knowledge of best mechanicalengineering practices and hydraulic knowledge. Description: Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accuratelyassemble equipment and productsCarry out work instructions as given bySupervisor, e.g. work specifications, equipment operation.Monitor and control materials, productsor equipment to detect defects or faults.Identify product defects and completeappropriate documentation when defects are identifiedRework and/or repair assembledequipment and products according to engineering specification changesMaintain quality and quantity of production.Check workvia use of gauges, visuals and measuring toolsMaintain anorganised / visual workspace including inventory (5S understanding )Support keyinitiatives such as on time delivery, schedule attainment, cost of qualityGenerate andimplement improvement ideas and encourage idea generation among team membersand stop work for safety, stop production for quality, and escalate concernsBe familiarwith and use of proactive root cause problem solving (Fishbone etc.)Evaluate current production estimates and outputs.Support allNCR reporting.Support initiatives such as new techniques and products, purchases ofnew machinery.Attend daily team brief meetings, actively engaging in positivediscussions regarding potential problematic areas.Accurately describe events during quality related investigations, aidingthe Supervisor to understand the root cause where required.Willingly assist Supervisor to eradicate identified potential areas ofnon-conformance.Respond to identified process improvements and implement them willingly.Report discrepancies in job route times as soon as they are identified.Communicate them to the Supervisor and implement changes when requested.Strive to assist with maintaining all relevant KPIs in Safety, Quality,Cost, Delivery and Engagement whilst identifying areas for improvement.Action all tasks assigned to maintain high levels of target achievementas designated by Supervisor.Take part and contribute in toolbox talks.Demonstrate awareness of and promote company objectives, policies andprocedures.Ensure that all procedures/paperwork is completed, kept up to date andsigned off by the relevant person.Ensure all company policies surrounding, health & safety, qualityrequirements and housekeeping are met.Adheres to inspection criteria, policies and procedures withoutexception.Travel as and when required.Carry out other duties as and when business requirements dictate as maybe reasonably expected by line manager.General:- Any other day to day tasks as may be requiredQuality Assurance:- Carrying out all duties in accordance with the quality assurance procedures / departmental works instructions.Qualifications:QUALIFICATIONS: B Tech in Mechanical engineering.EXPERIENCE: Working knowledge within an assembly & manufacturing environment including the preparation of componentsWorking knowledge (3 year ) within a mechanical repair environment.SKILLS AND COMPETENCIES:• Computer literacy (including good command of Microsoft Office Excel, Word and Outlook).• Ability to read and interpret engineering drawings• Proficient in both written and spoken English2019-08-06 16:43:08 |
Apply Now |
CMMS engineer
INR7"YEARLY"
CMMS EngineerFull Time (5-10 Yrs )Voltech HR Services Pvt Ltd |
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04CMMS engineerJob Location : OmanAttractive Salary + Food Allowance + AccommodationRequirements : Candidates with 5 + Years of experience as CMMS engineer Should be able to attend client interview in MumbaiInterested candidate can apply with your updated resume2019-08-06 15:58:57 |
Apply Now |
Purchase engineer
INR7"YEARLY"
Purchase EngineerFull Time (7-10 Yrs )Voltech HR Services Pvt Ltd |
Oman
Not Mentioned
oman
0oman
|
05-08-2019 2019-11-03Purchase engineerJob Location : OmanJob Description : Minimum of 7+ years experience in Purchase / Procurement with Oil & Gas Background. Proven negotiation skills with vendor management capabilities. Ability to lead a large team of cross functional engineers/ Managers to deliver projects on time cost Interested candidates can apply your resume.2019-08-05 15:31:53 |
Apply Now |
engineer Infortion Security
INR7"YEARLY"
Engineer Infortion SecurityFull Time (1-10 Yrs )Ooredoo Group |
Oman
Not Mentioned
oman
0oman
|
05-08-2019 2019-11-03Ooredoo Oman Family Member:As the engineer - Information Security you will be responsible for operating Security Operations Centre (SoC), conducting period security assessments & reviews, handling and responding to security incidents, correlating data & developing reports, in addition to other information security operational duties.Core Responsibilities:Your main responsibilities will be working closely with Information Technology and other relevant departments within Ooredoo to carry out reviews and other information security related activities, following up on security vulnerabilities, recommendations and risks with relevant departments to ensure on time closure, liaising with concerned parties prior to conducting security assessments.You will develop Information Security Operational Manual along with relevant parties and define all operational activities, developing and maintaining report templates, installing, configuring and maintaining SoC hardware and software, monitoring the network and the related components to ensure that levels of security standards are adhered to, developing and maintaining an Information Security Operations road map, preparing daily, weekly, monthly, quarterly and yearly and on demand reports for various security systems, maintaining and managing Security Operations Centre, and identify new technologies to improve SoC function, developing and maintaining incident response guidelines.You will be managing and maintaining a risk tracker to follow up on open items, activating incident response plan in an event of a security breach, maintaining/monitoring assigned systems within environment to ensure optimal performance, submitting review and assessment reports to Section Head ISM Director in accordance with the reporting schedule, providing support in reviewing technical procedures and processes related to different systems within Ooredoo, ensuring all network activities are tracked and logged.The Person:To apply for this position you should have the followings:- Bachelors degree in Information Technology or relevant domain- 3+ years total working experience at least 1 years of Information & Network Security experience ideally in a technical environment where managing confidential information is paramount- Comprehensive technical knowledge in networking with strong background of underlying technology.- Hands one experience and ability to promptly grasp new technologies.- Good technical analytical skill sets and knowledge.- Knowledge on various security assessment methods and tools.- Ability to manage and monitor various systems effectively- Security web system, Filtering and Blocking devices for traffic management, content-based filtering, service protection (Blue Coat and Flow-Inspect
REQUIREMENTS:
Preferred certification(s):- CCNA (Cisco Certified Network Administrator)- CEH (Certified Ethical Hacker)- Security +Other relevant certificationTechnical Skills Required:- SoC management- Incident response- Risk assessment - Strong communication skill sets- Strong technical analytical skill sets- Good documentation and reporting skill sets- Fluent in English and ArabicBehavioural skills Required:- Strong communication and reporting skills- Analytical thinking and attention to detail- Good planning & organising skills- Self & quick learner- Responsive & Result Orientated- Team playerNote: you will be required to attach the following:- Resume / cv- Passport-size photograph2019-08-05 15:30:10 |
Apply Now |
On Site Services Specialist
INR7"YEARLY"
On Site Services SpecialistFull Time (1-10 Yrs )General Electric (GE) |
Oman
Not Mentioned
oman
0oman
|
02-08-2019 2019-10-31Role Summary:This role will provide technical and hands-on expertise to support / resolve customers Motors and Generators problems. The Rotating Machines Field Service engineer will have a high level of expertise related to the mechanical/Electrical aspects of large electrical motors and generators, be capable of planning and executing jobs for self / site team, have a great customer reputation, and an entrepreneurial spirit.Essential Responsibilities:As the Rotating Machines Field Service engineer, you will:- Execute electrical tests in MV AC Electrical Motors and Generators: insulation resistance, winding resistance, voltage drop test, transformation ratio, partial discharge test, hipot & dc leakage test, dissipation factor test;- Perform tests and inspections in medium and large DC rotating machines: neutral zone adjustments, brush and brush holders tests / adjustments, commutation inspection (surface condition, sparkling conditions, etc.);- Perform motors and generators start-up / commissioning: static tests, operational tests (temperature elevation, vibrational tests, electrical parameters, etc.)- Execute assembly / disassembly of electrical components, such as cables, capacitors, rtds, surge arresters, fan motors, CTs, winding (coil assembly, parts insulation, etc.), etc.- Execute mechanical inspections in large and medium electrical rotating machines (motors & generators): dimensional control sleeve & roller bearings, air-gap inspections, metrology skills, etc.- Perform shaft alignments: motor-gear box / load machines, generator-gear box / turbine;- Execute assembly / disassembly of mechanical components and machine parts, such as rotor, stator, covers, heat exchanger, sleeve bearings, roller bearings, couplings, etc.- Assure GEs Environmental, Health and Safety (EHS) procedures are strictly followed in the job site;
REQUIREMENTS:
Qualifications/REQUIREMENTS:- Bachelors Degree in Mechanical/Electrical engineering or related discipline from an accredited college or university;- Minimum of 5 years of experience working with maintenance of large and medium rotating machines;- Fluent in Arabic and EnglishDesired Characteristics:- Strong oral and written communication skills. Strong interpersonal and leadership skills. Ability to work independently. Strong problem solving skills;- Ability and willingness to travel 70% of the time;- Field service and commissioning experience with rotating machines;- Experience in solving vibrations issues and balancing execution of high speed rotating machines;- Ability to execute increasingly complicated assignments that require considerable engineering; skill, creative ability and independent judgment;- Knowledge, competence and expertise with installation, commissioning tasks and services;About Us:GE (NYSE:GE) drives the world forward by tackling its biggest challenges. By combining world-class engineering with software and analytics, GE helps the world work more efficiently, reliably, and safely. GE people are global, diverse and dedicated, operating with the highest integrity and passion to fulfill GEs mission and deliver for our customers.2019-08-02 15:29:39 |
Apply Now |
Mechanical engineer
INR7"YEARLY"
Mechanical EngineerFull Time (5-16 Yrs )Dairy Company |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
01-08-2019 2019-10-30Urgently required Mechanical engineer for a well established Dairy firm at Oman.1. Salary: - Minimum of 1000 OMR. Salary can be raised as per the candidates experience.Free food, free accommodation, life insurance, health insurance, 2 way ticket yearly, 30 days paid leave, 5 working days / 2 days off weekly, annual bonus as per performance 2. Job PurposeThis position is responsible for designing, testing, perfecting and maintaining products, machinery and equipment. The role helps establish plant maintenance policies, procedures and flow charts for all mechanical, hydraulic and diesel-powered equipment and includes resolving motor, pump, conveyor and hydraulic problems. The position is also responsible for layout, fits, welding fabricated components to assemble structural forms and ensure maintenance of the same3. Main Tasks & Account abilitiesTask Description Key Result Areas Support production Evaluate all engineering drawings and Ensure adequate support to process ensure implementation according to production with reduced engineering (mechanical) specifications instances of equipment Designing, testing, perfecting and Breakdowns maintaining products, machinery and Address breakdowns equipment urgently to get production Ensure mechanical operations, back on track standards and controls are maintained at high quality Oversee performing of all fabrication/welding work including molding fixtures as required Check equipment and operating systems and correct wherever necessary Analyzing machine test results using diagnostic software to make adjustments for optimal performance Ensure Meticulous Records of Machine Service History are maintained Preventive Design, implement and maintain Planned maintenance and Maintenance preventive as well as predictive scheduled shutdown. JOB DESCRIPTIONMaintenance programs with the help of maintenance schedules with the maintenance team associated timelines Repair and perform preventive Lower instances of maintenance on machines as per unscheduled shutdown established standards to avoid machine leading to reduced downtime production losses Curative Investigate and resolve technical Address faults in equipment Maintenance problems within stipulated timelines with and machines in a time the help of a competent team bound manner Oversee diagnosing the issue for malfunctioning machines, and ensure repair work within stipulated time Help troubleshoot electrical controls for machines Quality control Monitor and control maintenance Ensure plant and equipment standards for the section function as per documented Evaluate finished products and perform performance standards quality checks on products Assemble old units and perform modification and repair work if required Hygiene,Health Monitoring work environment for hazards Safe workplace for and Safety and maintain healthy ventilation levels to employees compliance avoid particle or gas inhalation Accountable for meeting the Following safety protocol, including overall safety,quality,and wearing heat-resistant gloves, protective performance objectives masks, and safety shoes including implementing best Ensuring occupational health and safety practices related to the compliance as mandated by the plant function policies and government regulations Implement all company policies particularly with respect to hygiene Manage all state & federal compliance issues i.e. lock out/tag out, confined space, etc. Responsible for all mechanical engineering section safety related matters Team Building Ensure an optimized work force in terms Ensure creation/timely Planning, of quantity and quality updating of staffing plan acquisition and Effective communication within and Create and develop a high mentoring outside the team performing team, holding self Create a supportive environment for the and others accountable for team members results Contribute to the team, letting others know information that may be useful or important Help to create a fun, supportive work environment People Ensure accurate and up to date, daily, Effective coordination across management and weekly, monthly records as required by functions to achieve targets reporting the management. responsibilities Ensure tasks are understood by the team members, and performed responsibly and diligently Help others in the team if needed; Support relief staff in their duties7. Person Specification (Qualifications, Knowledge & Experience) 7.1: Education Level BTech / engineering degree in Mechanical engineering Minimum Requirement 7.2: Professional MBA (Manufacturing / Operations Management) preferred Qualifications have a valid drivers license 7.3: Work Experience Overall experience of 7 years or more in manufacturing with minimum of five (5) years Plant (Mechanical) Maintenance experience in an FMCG company/agribusiness Experience in overseeing manufacturing of dairy products will be preferred Experience with cultured products is a huge plus Strong understanding of the Middle East especially Oman 3 JOB DESCRIPTION7.4: Job Specific Skills Ability to work in adverse weather conditions Intimate knowledge of mechanical maintenance requirements in agribusiness/dairy/FMCG production environment Capacity to create and implement plant maintenance (mechanical) plans at the production site Experience with GMP, Quality, Environmental, Safety, and Employment Standards regulatory requirements Ability to deal with operational challenges in a production environment Financial awareness to understand and interpret numbers Excellent written & verbal communication / presentation Team player with excellent motivational skills 7.5 Generic Skills Must be alert, strive for accuracy, and have ability to exercise independent thinking and judgment, be a self- motivator, and attention to detail Displays cultural, gender, religion, race, nationality and age sensitivity and adaptability Integrity, discretion and loyalty Documents Needed:(Mandatory for CV selection) 1.Updated CV, 2.Photo, 3.Passport Scan 4.Educational Certificates 5.Experience Certificates 6. Attached Grid - Please FillPlease fill the below details:Current CTC:Expected CTC:Notice period:Current Location:Total Years of Experience:Relevant Experience:Gulf Experience:Mobile:Alternate Mobile:Mail Id:Relocation (Yes/No):Interview Process: CV Selection Telephonic Interview with ClientKindly send mentioned documents contact on 91+8977440780.2019-08-01 15:50:17 |
Apply Now |
Reservoir engineer
INR7"YEARLY"
Reservoir EngineerFull Time (5-6 Yrs )Shell |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
01-08-2019 2019-10-30PurposeThe primary role as a reservoir engineer with reserves experience is to report the Joint Venture (JV) Business Plan and Annual Review of Petroleum Resources (ARPR) through Shell Reserves Reporting Tool in a timely and compliant manner with support from the JV ARPR focal point and Shell Development Oman (SDO) Country Reserves Focal Point (CRFP). The candidate will be the primary interface along with SDO CRFP between the business process requirements, Reserves Assurance and Reporting (RAR) Team, Global Hydrocarbon Maturation (GHCM) Team and the JV Focal Points.Success is measured by the compliant and timely delivery of JV data for Business Plan and ARPR through Shell Reserves Reporting, the understanding of the data requirements and workflows in JV with respect to the Shell Reserves reporting requirements. In addition, the quality of the captured data and process improvements enabling simplifications, sustainable, and efficient delivery of the reporting processesAccountabilitiesCommunications:• Establish and keep regular contact with the JV's ARPR Focal Point (FP) and Cluster FP's in PDO.• Identify business support needs/data gaps in JV's data (capture & Understand PDO plans and needs).• Collect feedback from different teams - JV/SDO, central teams and share with each other to improve future delivery processes.Support Business Processes:• Accountable to QA/QC input reserves data and final data reporting using internal Shell Tools during Business Plan and ARPR delivery.• Support GHCM with analysis of HCM contents of business plan using internal Shell Tools, familiar with the applications such as Spotfire etc.• Support RAR with analysis of ARPR content in internal Shell Tool.Support Data Migration:• Help data migration between applications and data base environments• Manage handover to successorAuto req ID:115317BRSkillpool:Reservoir engineeringCountry of Work Location:OmanEmployment Type:Full TimeCompany Description:Shell in Oman has been a partner in the country's remarkable development and progress over the last several decades. In Shell, we have been providing pioneering technologies and expertise in the energy industry and creating value for the community that we have proudly been long part of.Disclaimer:Please note: We occasionally amend or withdraw Shell jobs and reserve the right to do so at any time, including prior to the advertised closing date.Before applying, you are advised to read our data protection policy. This policy describes the processing that may be associated with your personal data and informs you that your personal data may be transferred to Royal Dutch/Shell Group companies around the world.The Shell Group and its approved recruitment consultants will never ask you for a fee to process or consider your application for a career with Shell. Anyone who demands such a fee is not an authorised Shell representative and you are strongly advised to refuse any such demand.Shell is an Equal Opportunity Employer.Work Location:Muscat - Shell Development OmanRequirements:• Minimum Bachelors or preferable Master's University Degree in Petroleum engineering or Chemical engineering or Physics or equivalent.• Preferable seven years but not less than five years minimum experience in Reservoir engineering discipline specifically in Reserves Estimation, Reporting, and Accounting.• Basic understanding of Petroleum engineering, Production Forecasting, Hydrocarbon Maturation and Resource Volumes Accounting.• Maturity to deal with most confidential data.• Proven Experience in Resources/Reserves Estimation, Classification as resources mature in the Business, Classification SEC (US Securities and Exchange Commission) and Reporting including key controls that mitigate/minimize business risks.• Understand underlying fundamentals: resource uncertainty and maturity, both technical and commercial.• Experience with Technical Data Management.• Communication & Team Working: ability to interact with multiple people/disciplines to obtain & understand data & tools requirements. Mindful of relationship with key stakeholders.• Excel data analysis, visualization of large quantities of data, and programs like Spotfire.• Ability to quickly focus on key issues and learnings amongst large amounts of data.• Ability to work through others and build relationships to drive insights.• Being able to deliver requested results despite hectic schedules during the ARPR cycle.• High degree of achievement drive and initiative.• Proficiency in English.City, State (if applicable):Muscat2019-08-01 13:02:11 |
Apply Now |
Mechanical engineer
INR7"YEARLY"
Mechanical EngineerFull Time (6-8 Yrs )Shella Consultants |
Oman
Not Mentioned
oman
0oman
|
01-08-2019 2019-10-30Mechanical engineerJob Location : OmanRequirements :Candidate must have 6-8 years of exp in Oil and Gas IndustryCandidate must be working in Oil And Gas IndustryWorking experience as MECHANICAL engineer.2019-08-01 13:02:02 |
Apply Now |
Mechanical Site engineer
INR7"YEARLY"
Mechanical Site EngineerFull Time (6-12 Yrs )Pentascribe International |
Oman
,
Not Mentioned
oman
0oman
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
01-08-2019 2019-10-30Mechanical Site engineerJob Location : Saudi ArabiaRequirements :Minimum 6-12 Years experience in brown field mechanical construction and piping in oil & gas / refinery / petrochemical plant for review.Familiar with Aramco standards and experience will be an advantageSalary Negotiable Free Food Free Accommodation Free Transport Free Medical Free Insurance Free Ticket Paid Leaves Etc.2019-08-01 13:02:02 |
Apply Now |
Lead / Senior Piping engineer (Exp. 15+ yrs.)
INR7"YEARLY"
Lead / Senior Piping Engineer (Exp. 15+ yrs.)Full Time (15-16 Yrs )Client of Sofomation |
Oman
Not Mentioned
oman
0oman
|
01-08-2019 2019-10-30Job DetailsJob TitleLead / Senior Piping engineerIndustryOil & GasMain Function Areaengineering Oil / Gas / PetrochemicalSub Function AreaPipingWork LocationMasqat, OmanCandidateProfileWork Experience15Years+Relevant Experience15Years+Highest QualificationB.E. OR B.Tec in MechanicalJob SummaryOil & Gas Construction Projects specially in Pipeline, at least 5 years as Senior Piping engineer in Pipeline (Oil & Gas) project. Minimum 3-4 years experience in GCC is a mustContact DetailsSend your CV s @jobs@sofomation.com2019-08-01 13:01:51 |
Apply Now |
Commissioning engineer - Control & Automation - R-029967
INR7"YEARLY"
Commissioning Engineer - Control & Automation - R-029967Full Time (10-16 Yrs )SNC-Lavalin |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
01-08-2019 2019-10-30Job DescriptionTo coordinate the onsite commission and startup of control & automation equipment & provide specialist knowledge and advice to both client and subcontractor.Principal AccountabilitiesProvide specialist knowledge and advice relating to control & automation, cause and effective testing, complex loop checking,
Loop tuning
Logic modification, logic troubleshooting.
Partake in walk-downs & verification of subsystem handover
Progress reporting
Coordination with other disciplines
Partake in client and subcontractor meetings
Integration testing.
Perform hands-on commissioning in both Greenfield and Brownfield environments.
Industrial communication / networking.
Subsystem handover and management
Verification of check sheets & verification of completed work.
Lead and participate in HSSE Safety Leadership walk downs / workshops
Lead and participate in Flawless Delivery Leadership walk downs / workshops
Demonstrate personal HSSE leadership and excellent HSE behavior at all times, and ensure that safety expectations are communicated and maintained.
Attend all mandatory training as specified in HSE, and Permit To Work training schedule, and to act as Performing and/or Area Authority
Act as Company Representative at all times reporting to site CSU Lead but not be limited to site, liaising with PDO engineering teams if and when required but also with close liaison with key vendor specialists.
Lead Subsystem handover and management for your discipline
Attend and execute the Site Acceptance Testing (SAT) when required.
Ensure all packages have clear defined preservation requirements identified and applied.
Responding to engineering site queries where clarification of design is required and liaise with engineering contractor where a response to TQ’s as required.
Ensuring that commissioning procedures and paperwork is completed to enable a smooth hand over of systems to Operations.2019-08-01 13:01:45 |
Apply Now |
HSE Supervisor and HSE engineer
INR7"YEARLY"
HSE Supervisor and HSE EngineerFull Time (6-8 Yrs )Shella Consultants |
Oman
Not Mentioned
oman
0oman
|
01-08-2019 2019-10-30HSE Supervisor and HSE engineerJob Location : OmanRequirements :Candidate must have 6-8 years of exp in Oil and Gas IndustryCandidate must be working in Oil And Gas IndustryWorking experience as HSE SUPERVISOR OR engineer.2019-08-01 13:01:44 |
Apply Now |
Mechanical engineer
INR7"YEARLY"
Mechanical EngineerFull Time (4-9 Yrs )Tata Projects |
Oman
Not Mentioned
oman
0oman
|
01-08-2019 2019-10-30Ability to produce project specific procedures, Preservation & Maintenance check sheets, matrix andschedules.Ability to find out technical problems associated with rotating/static equipment and mechanicalpackages/valves are identified and resolved or coordinated with the respective vendor.Ability to preserve and maintain rotating equipment after equipment commissioning and start-up.Ability to perform various activities related to rotating equipment likes lube oil flushing, alignment,lubrication, vibration checks, start-up etc.Ability to perform various activities related to static equipment likes proper installation of internalinside the vessels as per drawing & specifications.Ability to perform various activities such as mechanical interlock, pipeline pigging activities, springsupport, hot & cold setting.Ability to perform air blowing, flushing, leak testing, flange management, drying & inerting of variouspiping.2019-08-01 13:01:32 |
Apply Now |
Mechanical engineer - Design/Construction - Hospital
INR7"YEARLY"
Mechanical Engineer - Design/Construction - HospitalFull Time (15-26 Yrs )CG resourcing |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
31-07-2019 2019-10-29Required to join an international consultancy working on the design and construction of a hospital project in Oman. The successful candidate will have the following responsibilities
Reviews, evaluates and approve design submissions, drawings, calculations, material submissions, method statements and documents for accuracy and compliance with the applied standards and specifications.
Ensuring that design, assessments, calculations and drawings are in accordance with the Employer Requirements, current industry Standards, Codes of Practice and Best Practice.Respond to the site RFIs and support worksite progress to ensure conformance to design, specifications and safety standards.Assists project stakeholders in preparation of project management plans. Adheres to project management plans as determined by project stakeholders.
Applicants should meet the following criteria
• 15+ years of extensive experience in MEP engineering design works (minimum 10 years’ experience in an engineering design company)• 10 or more years of working experience on design development of Hospitals/Healthcare facilities Multi- millions OMR projects.
• Sound experience and thorough knowledge of MEP design and code requirements supported with sound design experience with the latest UK health related standards (such as HBN and HTM).
• Specialized building services mechanical engineering works/systems for hospitals such as Piping, Pumps, Valves and accessories, HVAC, Firefighting systems, medical gasses/compressed air systems, STPs etc.
• Fully conversant with relevant international standards. Highly experienced in working with the latest international technical standards for mechanical works, current industry Standards, Codes of Practice and best practice.
• Conversant with and experienced working within BIM modelling environment
• Experience in conceptual, front end (preliminary) and detailed design required2019-07-31 13:21:08 |
Apply Now |
Electrical engineer - Design/Construction - Hospital
INR7"YEARLY"
Electrical Engineer - Design/Construction - HospitalFull Time (15-26 Yrs )CG resourcing |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
31-07-2019 2019-10-29Required to join an international engineering design consultancy working on the construction of a hospital in Oman. The successful candidate will be responsible for the following
Reviews, evaluates and approve design submissions, drawings, calculations, material submissions, method statements and documents for accuracy and contractual compliance with the applied standards and specifications.
•Verifies that Employer Requirements, applicable codes and engineering standard practices are being met and complied with by the D&B contractor.
•Specifying, designing and analysing new and existing electrical systems utilising engineering standards and specialist tools and software, including computer-aided design systems.
•Create engineering drawings and technical specifications for Client electrical/control designs/works/methods/processes as requested.
•Resolves issues or problems concerning conflicting design requirements, specifications and/or difficult interface/coordination requirements.
• Professional presentation and reporting to higher management.Applicants should meet the following criteria
15 years + of experience in electrical engineering design works, electric sub-stations and HV/MV/LV systems. Experience in the design of electrical building systems including lighting, MV/LV power distribution, standby generators, UPSs.
•10 or more years of working experience on design development of Hospitals/Healthcare facilities Multi- millions OMR projects.
•Sound experience and thorough knowledge of electrical design and code requirements supported with sound design experience with the latest UK health related standards (such as HBN and HTM).
• Experience in the design of technology systems including IT, security, CCTV, Access Control.
•Sound experience in design and construction of health facilities electrical works including wiring, lighting, panels, electrical installations and accessories. Fire-Alarm systems, communication systems, control systems, and other electrical systems. (minimum 10 years’ experience in an engineering consultancy company)
•Fully conversant with relevant international standards. Highly experienced in working with the latest international technical standards for electrical works, current industry Standards, Codes of Practice and best practice.
• Conversant with and experienced working within BIM modelling environment
• Experience in conceptual, front end (preliminary) and detailed design required.2019-07-31 13:21:08 |
Apply Now |
Planning engineer - Civil
INR7"YEARLY"
Planning Engineer - CivilFull Time (5-10 Yrs )Al Tasnim Enterprises LLC |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
31-07-2019 2019-10-29Proficient with planning and scheduling software (Primavera).Technical awareness of civil, electro-mechanical and architectural works, drawings and specifications.Prepare micro level construction program (loaded with resources) and set target milestones for each phase based on the project plan.Monitor critical activities based on the project schedule and advise project management.Prepare and submit updated work program and cash flow curve showing actual progress and identify areas of weakness and establishes means and methods for recovery, if any, as well as new critical activities.Monitor day to day work progress and prepare bi-weekly and monthly look-ahead programs.Prepare monthly report reflecting work progress (planned Vs actual) summary, MAS & shop drawing schedules, resources etc.Report to the Project Manager about the current work progress and make comparison between plan and actual progress and study impact of alternative approaches to work.Assist in preparing work program, cash flow and manpower histogram for tenders.Apply excellent communication /presentation skills in the Progress Review Meetings .2019-07-31 13:21:01 |
Apply Now |
Project Control & Planning engineer (Electrical)
INR7"YEARLY"
Project Control & Planning Engineer (Electrical)Full Time (5-10 Yrs )Seagull International |
Oman
Not Mentioned
oman
0oman
|
31-07-2019 2019-10-29Project Control & Planning engineer (Electrical)Job Location : OmanJob Details :Bachelor of engineering in Electrical from an approved University.Minimum 5 year experience with project control and planning ,primavera p3e and sap on oil and gas engineering, construction, CSU and maintenance activities in an EP related business and/or a contracting company servicing a petrochemicalProficiency in the use of PCs, data management and planning software for oil & gas projectsExperience primavera P3 planning is a must.Good communication skill.Proficiency in project control, planning and reporting software.Interested candidates can send their CV.2019-07-31 13:21:01 |
Apply Now |
Estimation engineer( Civil) - Al Naba Infrastructure LLC ( Oman)
INR7"YEARLY"
Estimation Engineer( Civil) - Al Naba Infrastructure LLC ( Oman)Full Time (10-16 Yrs )Al Naba |
Muscat
,
Oman
Oman
0muscat
Oman
Not Mentioned
oman
0oman
|
31-07-2019 2019-10-29Preparing complete cost of estimation for civil & architectural elements which includes; material, labor, erection equipments, testing / commissioning man hours, direct & indirect resources in line with BOQ, scope of work, project specifications & standards.DUTIES AND RESPONSIBILITIES:
• Study tender documents including drawings, project specification, BOQ, scope of work, contract details and conditions.
• Preparing tender study report by analyzing the scope of work.
• Study tender BOQ, quantities take off, sending enquiries to the vendors/ subcontractors to get competitive quotations.
• Implement tender strategy as communicated by proposals / estimation manager.
• Liaise with construction / operations team to establish execution / method statements and reflect the same in estimation.
• Establish direct cost resources required to execute various activities.
• Prepare man-hour calculations for various activities.
• Preparing technical clarifications to client for discrepancies in tender documents after reviewing, incorporating the changes after response.
• Participate in pre- tender meetings, site visits and preparing site visit report to analyze the project scope of work.
• Analyze vendor technical offers and commercial as well in view of project specifications and standards.
• Preparing comparative statements to analyze and select the most appropriate vendors and subcontractors.
• Prepare vendors cost comparative study report to get financial selection of vendors/ subcontractor & price.
• Preparing required bid documents includes commercial and technical submittals.
• Collect all vendors’ technical data sheets, vendor’s specification, drawings and compile in line with tender documents to prepare technical bid submission.
• Preparing coordinating post tender technical clarifications and commercial as well.
• Coordinating with vendor post tender clarification to technical qualifications.
• Assist the management for post tender commercial negotiations with client and vendors as well to reach competitive pricing.SECONDARY DUTIES AND RESPONSIBILITIES:
• Assist the project and procurement team after award / in the initial phase of the project.2019-07-31 13:21:00 |
Apply Now |
Associate Specialist - Services Programs
INR7"YEARLY"
Associate Specialist - Services ProgramsFull Time (1-10 Yrs )General Electric (GE) |
Oman
Not Mentioned
oman
0oman
|
06-08-2019 2019-11-04Role Summary:Leading, EHS wise, a team responsible for day-to-day operations and maintenance activities at wind farm facility. This includes the development, planning and implementation of Environmental Health and Safety programs & policies as per the GE guidelines and industry best practices. This EHS coordinator position will function in a team which includes other members of plant level staff, Technicians to ensure EHS compliance and strengthen our Wind Turbine Service and Maintenance team in OmanEssential Responsibilities:Ensure compliance of wind power plant operations with regulatory requirements relating to air, solid & hazardous waste, chemical, water, oil, greases, working at height, confined space and environmental health and safety.. Provide proactive leadership on all EHS and medical issues.. Create and run training sessions, refreshers for site personnel. Create and grow safety culture at assigned project. Implement / modify EHS programs and procedures to ensure company compliance and customer expectations. Maintain an in-depth knowledge of applicable Omani regulatory requirements. Modify and implement compliance tracking programs and record keeping systems. Provide and determine alternatives for issue resolution. Develop and work with site teams focused on EHS program development, implementation and improvementDrive accountability with all functions and associates to aggressively reduce accident and injuries.. Able to carry out risk, safety and hazard analysis.Apply ergonomic principles to improve workstations and minimize injuries.Develop and maintain excellent local and state agency relationships. Ability to work independently on the implementation of fault analyses and repair of wind turbine generator systems, including clarification of any client queries.. Planned and preventive maintenance of wind turbine generator systems.. Documenting of call-out responses, fault finding and repair work in service reports, logbooks and checklists. Management and documentation of corporate processes and IT-applications. Briefing/induction of external service provider and suppliers on site. Work for the continuous improvement of products and processes. Assistance of the technical leader of the area. Support in the development of training concepts
REQUIREMENTS:
Qualifications/REQUIREMENTS:. Degree in HSE from an accredited university or equivalent e.g. Nebosh; Occupational Health, Industrial Hygiene, Root Cause Analysis, Machine Safety, Law and Regulations, Chemical Safety, Manual Handling, Risk analysis, Fire Safety, Noise and Vibrations) or equivalent knowledge or experience or professional training in electrical, mechanical, mechatronics engineering (engineer or Diploma certificate).3 years experience leading environmental and safety compliance programs in a power plant environment. Proven experience with exposure to several EHS areas in the field environment. Great knowledge in local (Omani) EHS legislation. Medical fitness and willingness for work at height (Basic Safety Training would be a plus). Fluency in English, oral and written communication, presentation, training, and negotiation skills. Strong oral and written communication skills and strong interpersonal and leadership skills. Have a high energy level and the ability to energize others. Team player with strong interpersonal skills, capable of working within a diverse team. Ability to interface effectively with all levels within the company as well as organizations outside GE (regulatory agencies)Demonstrated knowledge of EHS and government regulations.Advanced computer skills and familiar with MS-Office(word, excel, ppt etc.).. Able to work at heights and high level of physical fitness.. Willing to work sometimes also at the weekends.. Valid Omani Driving licence. Social skills and ability to motivate staff and performance assessment. Technician or minimum 3 years practical experience in the power sectorDesired Characteristics:. NEBOSH qualified or regional EHS qualifications with proven experience in power generation sector/Oil and Gas/ FMCG/ Fertilizer sector etc.. Professional EHS certifications .Experience managing projects and/or EHS complianceTeam player with strong interpersonal skills. Electrical/ mechanical service or maintenance experience and willingness to work in troubleshooting of wind turbines will be an additional advantage.2019-08-06 21:02:14 |
Apply Now |
