Principal engineer - Loss Prevention 
INR7"YEARLY"
Principal Engineer - Loss PreventionFull Time (18-20 Yrs )Petrofac |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Scope of Responsibilities: Lead a team of engineers and designers in carrying out detailed engineering work for large sized projects assuming entire responsibility for conceptual and detailed design and provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules. Should be able to develop Loss Prevention Philosophies, Specifications, conceptual/detailed design of Fire Protection (Hydrant, Foam, Deluge) systems, Fire & Gas detection systems, Hazardous Area Classification, Fire Proofing design, Escape Routes, Plant equipment layout reviews. Knowledge of engineering software PIPENET is mandatory. Roles and Responsibilities: Review the ITB (Invitation To Bid) documents submitted in the proposals stage, issue inquiry requisitions, review techno-commercial vendor offers, prepare equipment, material and man-hour estimates. Review contract requirements for project execution, organize the preparation of the Technical Document Register (TDR), identify requirements and scope of work; review specifications Process Data Sheets (PDS), Piping Material Specifications (PMS), Piping & Instrumentation Diagrams (P&IDs), Plot plans, General Arrangement (GA) drawings, Review Philosophies, Area Classification Drawings, Fire and Gas Detector Layout Drawings and other relevant documents. Establish contract review criteria, identify and resolve discrepancies and divergences from original proposal through the instigation of technical queries to projects/client. Verify and conceptualize the most optimum work route. Identify a clear scope of work/supply and accordingly plan/schedule the engineering activities and manpower resource. Identify and quantity total number of engineering deliverables, man-hour allocation, format of delivery, time schedules and other requirements for execution of the work. Coordinate with projects and planning on project time schedules, establish target completion dates, ensure target dates are achieved. Develop Manpower charts and schedules, recommend, assign and distribute manpower for the execution of engineering activities within budgeted project man-hours. Recommend cost effective measures to reduce overall manpower costs. Supervise the preparation of safety design documents and analysis including, Firewater Systems, hydraulic calculations, fire protection equipment layout, safety equipment layouts, safety sign layouts, schedule of hazardous sources, fire and gas cause-and-effect diagrams, fire and gas detection layouts, firefighting and safety equipment specifications, passive fire protection studies, Fie Protection Design Basis, Fire & Gas Philosophies and other safety engineering deliverables. Provide inputs for the preparation of plot plans, organize the issuance of engineering drawings and technical documents for Inter-Discipline Checks (IDCs) coordinate with other engineering discipline in the integration of data inputs. Direct the preparation of technical inquiry requests (Inquiry Requisitions) to vendors, participate in the technical evaluation of vendor bid offers. Direct and provide guidance in the Technical Bid Evaluations (TBE), review vendor drawings and documents. Supervise the review of design calculations, ensure vendor equipment specifications meet with client equipment specifications and are within budgeted costs. Coordinate the preparation of Purchase Requisitions for the procurement of equipment and materials. Ensure materials are obtained within scheduled timeframes and budgeted costs. Attend HAZOP, HAZID and ENVIID meetings. Participate in meetings with client and vendor representatives, clarify and ensure vendor specifications meet with client requirements in a cost effective manner. Interface and regularly meet with client and vendor representatives, conduct internal staff meetings, ensure the progress of project in accordance to schedule, allotted man hours and budgeted costs. Coordinate with projects and planning departments on schedule related issues. Update TDR progress reports through the use of PETROCEPT software. Interact with Quality Assurance for quality issues, strictly ensure compliance with Companys ISO Quality procedures. Coordinate Internal and Client audit requests, facilitate audit procedures of engineering systems within the department. Interface and provide clarification and guidance and technical support to construction sites and commissioning engineers. Participate in employee performance evaluations, establish performance criteria, identify employee strengths and weaknesses, recommend training and development requirements. Perform related duties as and when directed by Direct Supervisor.2019-12-10 11:03:15 |
Apply Now |
QA engineer
INR7"YEARLY"
QA EngineerFull Time (3-5 Yrs )Flowserve Corporation |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Summary A QA Associate participates in the entire life cycle of quality activities for the facility. This will include monitoring Flowserve QA processes, developing and implementing improvement projects, reviewing project and customer requirements and implementing those into the production process, and assisting with inspections and material reviews as required. Primary Responsibilities 1. Enforce strict Flowserve QA standards through all processes 2. Review specifications for current/future projects to insure compliance by Flowserve 3. Support Flowserve SHEA requirements in the facility at all times 4. Measure and evaluate critical work processes for targeted improvements 5. Perform internal audits as required by Flowserve policy 6. Conduct material inspection and review as required 7. Interact with customers during inspections and document reviews 8. Prepare documentation for orders as required by order quality stipulations 9. Resolve differences in specifications by garnering management support2019-12-10 11:03:15 |
Apply Now |
Area Maintenance Leader
INR7"YEARLY"
Area Maintenance LeaderFull Time (10-11 Yrs )Saudi Aramco Total Refining And Petrochemical Company(SATORP) |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Provide technical leadership and on the ground support to all routine maintenance activities including maintenance, repair and calibration of a wide range of mechanical, electrical, instrumentation, piping, heat, ventilation and air conditioning systems within the designated area of responsibility with Ensure optimizing the availability and reliability of all equipment and systems in the designated area through inspecting repair and maintenance works performed by SATORPs employees and contractors on a regular basis with distribute and coordinate work assignments among the area maintenance team to execute daily routine maintenance plans and ensure timely completion. Skills Strong knowledge of Maintenance Management principles and theories, with Strong knowledge of the maintenance and repair of Refinery equipment, with Good knowledge of petroleum Production systems and equipment.2019-12-10 11:03:15 |
Apply Now |
Construction Manager
INR7"YEARLY"
Construction ManagerFull Time (15-18 Yrs )Petrofac |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Scope of Responsibilities: Executing the project construction activities (or part thereof), in line with the project specifications, scope of work, schedule, and client requirements. Leads a team of construction superintendents, and manages the construction subcontractors construction managers in completing the subcontracted works, while maintaining the required HSE and Quality standards. Represents Petrofac during the execution of the construction works Roles and Responsibilities: Review and understand the project HSE and Quality requirement, scope of work, specifications, and project overall schedule. Prepares Construction Management Organisation chart, identify key positions, and prepares mobilisation plan, in coordination with Project Director (or Field Project Manager). Establish clear definition of responsibilities for the construction management personnel. Reviews and leads the implementation of the project HSE & Quality plans. Contribute to project constructability review workshops at home office during engineering activities, in coordination with construction support engineer, and subcontractors construction managers. Prepares, in coordination with construction subcontractors managers, and the project director, the subcontracting and mobilisation plan. Prepares the construction schedule in conjunction with the planning engineers with details on specific activities and respective dates of completion. Ensure the mobilization of all labor, materials and equipment in the most cost effective and efficient manner to achieve the construction objectives. Commence the construction as per guidelines set and ensure the completion of the same as per the above plan. Leads the construction management team, fostering continuous inter-discipline coordination to ensure the smooth completion of all activities with minimum interruptions & reworks. Promotes excellent working relationships with construction subcontractor team members. Ensures continuous construction work fronts availability through preparation and review of look ahead schedules , commodity charts , engineering deliverables and material delivery schedules Constantly identify bottlenecks for progress on construction and proactively take action to resolve the same. Chairs daily , weekly & monthly internal meetings , and ensures action points are liquidated in a timely manner Carry out any other duties as directed by the reporting supervisor. Continuously assess, with the QC & HSE managers, the status of Construction Quality & HSE, and ensures timely closures of corrective actions & non conformances. Coordinate and liaison with client/contractor and certifying and regulatory authorities in order to ensure that the project is in compliance with all requirements. Ensures proper and timely hand over of systems / subsystems to commissioning teams, and provide assistance as required. Continuous performance assessment of subordinates, giving them feed back on their performances, their strengths and weaknesses, giving them clear guidance on areas where they should improve. Ensures that this system is cascaded down in his organization at site. Reviews lessons learned recorded by construction superintendents, chairs review sessions, and raise the final list to superior for further action.2019-12-10 11:03:15 |
Apply Now |
Project Control engineer
INR7"YEARLY"
Project Control EngineerFull Time (15-20 Yrs )Petrofac |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Scope of Responsibilities: Support end-to-end execution of projects from conceptualization to planning, monitoring, completion and final handover of the project to ensure smooth implementation of project plans and schedules within the time and budgetary parameters, optimizing resource utilization. Roles and Responsibilities: Participate in the tendering process provide inputs in terms of scope of the job and technical specifications for various requirements which forms the basis for the project schedule in co-ordination with the projects team. Prepare detailed plans and project schedules to be followed by the project management and functional teams such as engineering, pre commissioning, commissioning, start-up, procurement, construction drawing in expertise from different disciplines to pool in combined knowledge. Facilitate reporting of project status and trend and ensure completion of the project within the parameters of time, cost, quality. Implement work schedules and monitor progress of projects from conceptualization to completion and final handover for timely execution of projects in terms of cost, resource deployment, time overruns and quality compliance. Monitor construction activities, generation and analysis of periodic daily, monthly, weekly reports to apprise the management and client with respect to action plans/schedule. Carry out follow-up of progress and periodic updation of the status to analyse the progress trend for highlighting conformance to the plan as well as areas of shortfall with a view to minimize the deviations. Periodic reviews are organized at various levels to deliberate upon the Progress Trend wherein decisions on alternative action plans are firmed up to arrest slippages, reinforce deployment of resources and continue conformance to the plan requirements. Conduct a cost benefit analysis of the project and work out schedules for material requirement planning viz. piping, from procurement to construction, inventory control as per the contractual terms and scheduled completion dates to ensure availability in a phased and sequential manner as per the plan requirements. Monitor quality of incoming materials and implement quality control and process capabilities to optimize resource utilization. Adhere to organizational work procedures and systems to ensure conformance to the system and incorporate innovations and suggestions for improvement. Manage the team and mentor them, foster role clarity, involvement and team spirit to facilitate smooth execution of the project . Perform any related duties and responsibilities as and when required.2019-12-10 11:03:15 |
Apply Now |
engineer I - HSE Design
INR7"YEARLY"
Engineer I - HSE DesignFull Time (10-15 Yrs )Petrofac |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Scope of Responsibilities: carry out Safety Design activities and provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules. Roles and Responsibilities: Review the ITB (Invitation To Bid) documents submitted in the proposals stage, issue inquiry requisitions, review techno-commercial vendor offers, prepare equipment, material and man-hour estimates. Review contract requirements for project execution, organize the preparation of the Technical Document Register (TDR), identify requirements and scope of work; review specifications Process Data Sheets (PDS), Piping Material Specifications (PMS), Piping & Instrumentation Diagrams (P&IDs), Plot plans, General Arrangement (GA) drawings, Review Philosophies, Area Classification Drawings, Fire and Gas Detector Layout Drawings and other relevant documents. Establish contract review criteria, identify and resolve discrepancies and divergences from original proposal through the instigation of technical queries to projects/client. Verify scope of work, budgeted man hours, budgeted quantities, total of deliverables, format of delivery, time schedules and other specifications for execution of the work. Prepare Manpower schedules and Manpower Plans, evaluate manpower requirements, assign engineers in accordance to areas of specialization. Monitor and track man-hours, ensure actual man-hours are within budgeted costs, identify variations between Contract and proposal, take corrective action as necessary. Supervise the preparation of HSE safety designs and philosophies, including HAZOP & HAZID analysis and reports, shutdown and blow down philosophies, fire proofing requirements, site environmental and metallurgy data, Consequence Analysis Reports, Fire and Explosion Reports, Risk assessment Reports, Emergency Evacuation analysis, Flare radiation analysis, noise studies and other risk assessment reports. Supervise and provide guidance in the preparation and evaluation of plot plans, engineering drawings and technical documents issued for Internal Design Checks (IDCs) and the integration of other engineering discipline data inputs. Prepare technical document requirements for equipment specifications. Attend HAZOP, HAZID and ENVIID meetings. Participate in meetings with client and vendor representatives, clarify and ensure vendor specifications meet with client requirements in a cost effective manner. Participate in progress meetings, submit project progress reports through the update of information on the PETROCEPTS software. Interact with Quality Assurance for quality issues, strictly ensure compliance with Companys ISO Quality procedures. Coordinate Internal and Client audit requests, facilitate audit procedures of engineering systems within the department. Interface and provide clarification and guidance and technical support to construction sites and commissioning engineers. Perform related duties as and when directed by Direct Supervisor.2019-12-10 11:03:15 |
Apply Now |
Welding engineer
INR7"YEARLY"
Welding EngineerFull Time (8-14 Yrs )Petrofac |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Scope of Responsibilities: This position provides the opportunity to work in a project team environment with other engineers involved in performing failure analysis & metallurgical evaluations at Oil & Gas Projects. This will involve conducting metallurgical evaluations of selected Plant equipment, components, and materials. Experience in failure analysis of observed welding techniques and associated processes will be used to determine the root cause of the failure and recommend corrective actions. Duties include review of contractor''s welding procedures for engineering approval prior to welding on client''s systems and providing technical support to project teams. Roles and Responsibilities: Candidates should have a proficient working knowledge of welding processes such as: (GTAW, SMAW, SAW, GMAW, FCAW, etc.) and the welding and fabrication codes, such as API, ASME B31.1, ANSI B31.7, ASME Section I, II, III, VIII, IX, XI, AWS D1.1, D1.2, D1.5, D1.6 and D9.1. Additional knowledge and understanding of nondestructive methods and selection of the right application for a particular inspection code (UT, RT, PT, MT, etc.). Expected to define and supervise projects to completion, develop technical reports and presentations, interact with internal and external customers and perform assigned tasks with limited supervision. Should be responsible for preparation of project quality plan / procedures. Ensure implementation of quality plans and procedures. Supervision of welding and NDT activity. Reviews and internal / external audits of quality management systems. Planning and implementation of the Quality Assurance activates within major projects and coordination, implementation of the major projects quality control activities. Review, preparation, acceptance of Quality Manuals, quality plans, inspection & test plans, QA procedures, QC procedures, work-site instructions. Preparation/acceptance of QC certification records, mechanical completion certificates and associated records / test sheets, to the issuing of certificates of safety for the plant / works.2019-12-10 11:03:15 |
Apply Now |
Expeditor
INR7"YEARLY"
ExpeditorFull Time (10-15 Yrs )Petrofac |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Scope of Responsibilities: Perform post order coordination with vendors and expedite materials to ensure delivery schedule match specifications. Coordinate timely flow of engineering documents, certificate tests reports and inspection reports between supplier and concerned sections. Handle any delivery inconsistencies and exercise judgment with defined procedures and practices to deliver appropriate action Roles and Responsibilities: Follow up approvals of documents/drawings from discipline engineers. Receive purchase order acknowledgement and execution schedules from suppliers. Maintain an expediting file for each purchase order, which would be used through out the project period. Carry out desk as well as field expediting visits to speed up deliveries. Organize kick of meetings, pre-inspection and technical meetings with vendor and review purchase order. Confirm uniform understanding and receipt of purchase order attachments, sub orders, vendor documents and PO status. The proposed vendor bar chart. Identify progress miles stones and resolve operational issues. Take remedial action in case of slippage. Maintain control sheets for bulks and periodically update project management on the status of all P.Os. Identify potential delays to the agreed schedule. Initiate remedial action likes commit more manpower, sub contract part of purchase order, reschedule work activities, offer alternative materials etc. Obtain prior approval form the project engineer for any technical change involving significant work. Coordinate inspection and logistics activities between supplier and concerned parties. Authorize third party inspection agencies for taking up inspection activities. Receive test results from inspector engineers and follow up approvals by QA/QC. Fix up inspection visits in coordination with suppliers and TPA. Review inspection report and verify for compliance with PO requirements in consultation with QA/QC and respective discipline. Plan shipping for critical/big packages prior to readiness of consignment Issue shipping release to vendor after obtaining shipping clearance from QA/QC. Expedite final data dossier from vendor. Acquire shipment documents for dispatch of the consignment. And perform associated paperwork. Coordinate with freight forwarders and shipping department for quick transportation of equipments to site. Issue marine declaration statement and maintain relationship between shipping, accounts payable and procurements department. Also verify any discrepancies of invoices in accounting. Verify vendor payment invoices with respect to PO terms and conditions. Intimate vendors regarding non-delivery and back orders and assist accounts department in problem invoices. Prepare records reflecting summary of vendor contacts, progress visits, inspection reports status etc and maintain them in purchase order expediting file. Update expediting report and inform management highlighting problematic areas with suitable recommendations. Maintain performance metrics by ensuring vendor delivery performance, vendor quality performance, on time delivery and inventory accuracy. Document Expediting track record so that necessary personnels are aware of the status of an order. Integrate with and work along side the controls team and perform all related tasks as and when directed by the supervisor.2019-12-10 11:03:15 |
Apply Now |
Principal engineer - HSE Design
INR7"YEARLY"
Principal Engineer - HSE DesignFull Time (18-22 Yrs )Petrofac |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Scope of Responsibilities: Lead a team of engineers and designers in carrying out detailed engineering work for large sized projects assuming entire responsibility for conceptual and detailed design and provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules. Should be able to perform Fire, Explosion & Dispersion modeling, QRA, Risk Control Measures to demonstrate ALARP, Fire & Explosion Risk Assessment, Safety Studies like HAZID, HAZOP, SIL, Escape & Evacuation studies. Roles and Responsibilities: Review the ITB (Invitation To Bid) documents submitted in the proposals stage, issue inquiry requisitions, review techno-commercial vendor offers, prepare equipment, material and man-hour estimates. Review contract requirements for project execution, organize the preparation of the Technical Document Register (TDR), identify requirements and scope of work; review specifications Process Data Sheets (PDS), Piping Material Specifications (PMS), Piping & Instrumentation Diagrams (P&IDs), Plot plans, General Arrangement (GA) drawings, Review Philosophies, Area Classification Drawings, Fire and Gas Detector Layout Drawings and other relevant documents. Establish contract review criteria, identify and resolve discrepancies and divergences from original proposal through the instigation of technical queries to projects/client. Verify and conceptualize the most optimum work route. Identify a clear scope of work/supply and accordingly plan/schedule the engineering activities and manpower resource. Identify and quantity total number of engineering deliverables, man-hour allocation, format of delivery, time schedules and other requirements for execution of the work. Coordinate with projects and planning on project time schedules, establish target completion dates, ensure target dates are achieved. Develop Manpower charts and schedules, recommend, assign and distribute manpower for the execution of engineering activities within budgeted project man-hours. Recommend cost effective measures to reduce overall manpower costs. Coordinate with 3rd party consultants on safety and environmental studies, assess impact of HSE studies on engineering, coordinate with other engineering disciplines for close out of commendations from HSE Studies. Provide input for package emissions / noise requirements in compliance with local Environmental regulations Manage the preparation of HSE safety designs and philosophies, including HAZOP & HAZID analysis and reports, shutdown and blow down philosophies, fire proofing requirements, site environmental and metallurgy data, Consequence Analysis Reports, Fire and Explosion Reports, Risk assessment Reports, Emergency Evacuation analysis, Flare radiation analysis, noise studies and other risk assessment reports. Supervise and provide guidance in the preparation and evaluation of plot plans, engineering drawings and technical documents issued for Internal Design Checks (IDCs) and the integration of other engineering discipline data inputs. Prepare technical document requirements for equipment specifications. Attend HAZOP, HAZID and ENVIID meetings. Participate in meetings with client and vendor representatives, clarify and ensure vendor specifications meet with client requirements in a cost effective manner. Participate in progress meetings, submit project progress reports through the update of information on the PETROCEPTS software. Interact with Quality Assurance for quality issues, strictly ensure compliance with Companys ISO Quality procedures. Coordinate Internal and Client audit requests, facilitate audit procedures of engineering systems within the department. Interface and provide clarification and guidance and technical support to construction sites and commissioning engineers. Participate in employee performance evaluations, establish performance criteria, identify employee strengths and weaknesses, recommend training and development requirements. Perform related duties as and when directed by Direct Supervisor.2019-12-10 11:03:15 |
Apply Now |
Principal engineer - Electrical
INR7"YEARLY"
Principal Engineer - ElectricalFull Time (18-22 Yrs )Petrofac |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Scope of Responsibilities: Supervise and lead a team of engineers and designers in carrying out detailed engineering work for large sized projects assuming entire responsibility for conceptual and detailed design and provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules. Roles and Responsibilities: Review ITB (Invitation To Bid) documents submitted in the proposals stage, issue inquiry requisitions, review techno-commercial vendor offers, prepare equipment, material and man-hour estimates. Review contract requirements for project execution, organize the preparation of the Technical Document Register (TDR), identify requirements and scope of work; review specifications and Data Sheets, Piping & Instrumentation Diagrams (P&IDs), Plot plans, General Arrangement (GA) drawings, Review Philosophies, Area Classification Drawings and other relevant documents. Establish contract review criteria, identify and resolve discrepancies and divergences from original proposal through the instigation of technical queries to projects/client. Verify and conceptualize the most optimum work route. Identify a clear scope of work/supply and accordingly plan/schedule the engineering activities and manpower resource. Identify and quantify total number of engineering deliverables, man-hour allocation, format of delivery, time schedules and other requirements for execution of the work. Coordinate with projects and planning on project time schedules, establish target completion dates, ensure target dates are achieved. Develop Manpower charts and schedules, recommend, assign and distribute manpower for the execution of engineering activities within budgeted project man-hours. Recommend cost effective measures to reduce overall manpower costs. Organize the preparation of equipment and material specifications and data sheets, administer the development of detailed engineering calculations and drawings including the preparation of Single Line Diagrams, Schematic Diagrams, Logic Diagrams, Cable Schedules and Cable Drum Schedules, Interconnection Schedules, Hazardous Area Classification, Equipment Lay-outs, Cable Routing and Lay-out Drawings, Cable Trench/Tray Lay-out Drawings, Lighting System Lay-out and Details, Earthing/Lighting System Lay-out and Details, Heat Tracing Lay-out and Details, Installation Standard Drawings, Relay Coordination Drawings and other required documents. Direct the preparation of technical inquiry requests (Inquiry Requisitions) to vendors, participate in the technical evaluation of vendor bid offers. Direct and provide guidance in the Technical Bid Evaluations (TBE), review vendor drawings and documents. Supervise the review of design calculations, ensure vendor equipment specifications meet with client equipment specifications and are within budgeted costs. Organize the preparation of single-line diagrams, load schedules, equipment sizing and electrical distribution diagrams for client approval. Coordinate the development of load lists and system studies using ETAP software. Perform design calculations for earthing, lightning protection, lighting, relay settings etc. Provide inputs for the preparation of plot plans, organize the issuance of engineering drawings and technical documents for Inter-Discipline Checks (IDCs) coordinate with other engineering discipline in the integration of data inputs. Coordinate the preparation of Purchase Requisitions for the procurement of equipment and materials. Ensure materials are obtained within scheduled timeframes and budgeted costs. Interface and regularly meet with client and vendor representatives, conduct internal staff meetings, ensure the progress of project in accordance to schedule, allotted man hours and budgeted costs. Coordinate with projects and planning departments on schedule related issues. Update TDR progress reports through the use of PETROCEPT software. Direct and monitor Material Take Off (MTO) activities, identify irregularities and shortfalls, take corrective action as required. Participate in HAZOP meeting with the client and representatives of the other engineering disciplines. Interact with Quality Assurance for quality issues, strictly ensure compliance with Companys ISO Quality procedures. Coordinate Internal and Client audit requests, facilitate audit procedures of engineering systems within the department. Provide clarification and guidance and technical support to construction sites and commissioning engineers, provide startup assistance as required. Participate in employee performance evaluations, establish performance criteria, identify employee strengths and weaknesses, recommend training and development requirements. Perform related duties as and when directed by Direct Supervisor.2019-12-10 11:03:15 |
Apply Now |
SALES engineer (ARAB)
INR7"YEARLY"
SALES ENGINEER (ARAB)Full Time (2-5 Yrs )Zamil Group |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Job Purpose: Under the direct supervision of the Sales Manager, the job is generally responsible for generation of new business opportunities for the company. Key Results Areas: 1. Business or Market Leads Penetrates new market for generation of new business leads. Identifies potential projects in the market through Market Intelligence Initiatives to generate more business opportunities for the company. Coordinates with engineering Procurement and Construction (EPC) Contractors for bidding requirements Receives and reviews customer sales inquiries to establish clarity on their requirements. Endorses to Estimation Department the customer sales inquiries for preparation of proposals. Goes on field work to introduce the company and the business to new contractors or potential clients in the market as or when needed. 2. Sales Proposals Follows up from Estimation Department status of the Sales Proposals to meet the target date set. Reviews the proposals and submits the same to the customer for their acceptance and review. Discusses with the customers the details of the proposals and negotiates with them to ensure higher chance of closing the deal. 3.Special Assignments Works on other projects or duties that may be assigned from time to time.2019-12-10 11:03:15 |
Apply Now |
Cost engineer
INR7"YEARLY"
Cost EngineerFull Time (5-10 Yrs )Saudi Designers Engineering Consultants |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Cost engineer with Transferable Iqama.
1. 5++ work experience
2. Transferable Iqama
3. Preferably based in Eastern Province, KSA
4. Any nationality2019-12-10 11:03:15 |
Apply Now |
Electrical Site engineer
INR7"YEARLY"
Electrical Site EngineerFull Time (5-10 Yrs )Saudi Designers Engineering Consultants |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Urgently required Electrical Site engineer with transferable iqama
Look after the individual discipline works of the site and are responsible for the day to day progress, quality & timely completion of the work.
Provides reports of the site management in respect of quality & progress.
Check resources for adequacy & quality.
Resolve issues relating to drawings & specifications.
Certification of works executed by the supervisors & Foreman2019-12-10 11:03:15 |
Apply Now |
Subcontracts engineer
INR7"YEARLY"
Subcontracts EngineerFull Time (4-7 Yrs )Olayan Descon Industrial Company |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Prepare subcontracting plan for the project identifying works to be subcontracted, their award schedule, fair price estimates and budget provision.
Evaluate quotes, seek clarifications and finalize Comparative Statement Targets (CST) considering the approved budgeted quantity and cost and obtain approval from Head IPBA.
Issues inquires to pre-qualified bidders and solicit quotes in time to meet the project requirements.
Prepare inquiry packages for different subcontracting jobs including scope of work, terms of reference, BOQs, specification, scope of supply, condition of contract and form of agreement.
Responsible for selection successful bidders in consultation with the PM and get the contract executed.
Ensure that Work Evaluation Report is initiated on every subcontractor by SM and keep record of the same for the purpose of re-evaluation at the time of award of new job or on the expiry of the PQ period.
Ensure that record of subcontractors, whose contracts are either terminated or who are blacklisted, is communicated to Head Office.
Receive progress invoices from subcontractors and process them for release of payment including settle of the final account and release of bonds / guarantees etc.
Obtain payable aging reports regarding subcontracts from Finance and effect timely release of invoices.2019-12-10 11:03:15 |
Apply Now |
Senior Corrosion engineer
INR7"YEARLY"
Senior Corrosion EngineerFull Time (10-15 Yrs )National Drilling Company A Division of National Petroleum Services |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09MAIN RESPONSIBILITIES
1. Performs corrosion and metallurgical inspection to of facilities and studies fracture, corrosive actions, and other problems of deterioration. Determines preventive and corrective measures for the protection of production, loading, refinery and utility facilities. Prepares scope of work, specifications, drawings and technical aspects related to corrosion, construction and maintenance of tank of tender documents for design engineering, construction and modification of facilities including preparing explanation to Governments for approval of the tender.
2. Checks and evaluates specifications, drawings and technical parts of tender documents submitted by the contractor or supplier for design engineering, construction and modification of facilities. Supervises and inspects contractors work in engineering, and in the construction and modification of tank to ensure compliance with the terms and conditions of contract, and Companys and international standards, installs and maintains the corrosion monitoring system.
3. Consults with other engineers concerned for studying and solving problems related to corrosion protection engineering, tank construction and maintenance. Prepares and controls the budget for all projects in the tank maintenance and corrosion control section.
4. Studies new technology and applications of corrosion protection engineering related to oil handling facilities, and collects data for new projects. Consults with the Specialist in the department regarding highly technical modifications or installations. Ensures the implementation of safety rules and procedures and safe work practices both at sites and workshop.
5. Participates in various meetings with Supervisors of other departments to discuss the status of construction and modification of the oil production facilities, to establish priority procedures for the corrosion protection.2019-12-10 11:03:15 |
Apply Now |
Senior Process engineer
INR7"YEARLY"
Senior Process EngineerFull Time (10-15 Yrs )National Drilling Company A Division of National Petroleum Services |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Monitors operations (operating conditions) and receives information on process status, recommends adjustments to improve operational efficiency. Carries out the ongoing analysis and review of production, developing, monitoring and updating the process simulation model, to predict various operating modes and the effect of different reservoirs on equipment performance, product quality and quantity.
2. Coordinates all short and long term maintenance plans and programs on the assigned units. Unless with PRD division supervisors and FMD to determine periodic maintenance and overhaul schedules for all production facilities and associated equipment.
3. Coordinates, from a production perspective, all facilities development/expansion projects in the assigned production units. Desalter and PMGR. Participates FEED and EPC contract project with PCD professionals in the detailed technical assessment and specification of equipment/facility enhancement requirements. Participates with PCD in project monitoring, commissioning/testing and hand-over upon completion.
4. Carries out all activities in accordance with the Company safety procedures and manufacturers recommendations.
5. Develops and updates technical information, guidelines, operating manuals and procedures covering all stages of production operations in the Desalter and PMCR units. Reviews and updates technical manuals for various equipment received from manufacturers, includes reviewing comments of production division supervisors, assessing current processes and recommending changes for the safe and efficient operation of all processes.
6. Prepares technical summary reports, project reports and summaries on oil production, Check and review project scope/specification for modification/upgrading production facilities and develop & update operation manuals for new production facilities.
7. Participates in developing and updating the various sampling programs on oil and gas products carried out by the Production Laboratory to assist in process monitoring and simulation activities.
8. Carries out other similar and/or related activities which includes liaising with other production or process engineering specialists to exchange process data or resolve current problems, maintaining an ongoing awareness of developing technologies in the oil and gas industry, carrying out special projects and acting as a divisional focal point on advanced technologies. Assists with the developing and training of more junior engineers and in coordinating operations training.2019-12-10 11:03:15 |
Apply Now |
Technology Coordinator
INR7"YEARLY"
Technology CoordinatorFull Time (10-15 Yrs )National Drilling Company A Division of National Petroleum Services |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09We National Drilling Company are looking forward to hire highly qualified candidates to work for our Client Al Khafji Joint Operations (KJO) as Technology Coordinator for the Clients Technology and Database Management Division2019-12-10 11:03:15 |
Apply Now |
Material engineer
INR7"YEARLY"
Material EngineerFull Time (10-15 Yrs )National Drilling Company A Division of National Petroleum Services |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Prepares and proposes material supply and services procurement plans. Initiates and proposes standardized material supply and logistic supporting work flow. Evaluates and optimizes material stock inventory, supply and procurement processes. Investigates and proposes specifications and qualitative requirements of materials and services. Inspects and reviews drilling shop and maintenance activities.
1. Coordinating with drilling operation team and other Departments and contractors, estimates requirements and prepares plans for material supply and services procurement in accordance with the COMPANYs long range exploration and development programmes. Reviews, inspects and proposes requirements and specifications of materials/supplies, equipment and logistic services for drilling operations.
2. Establishes and instructs standardized material supply and logistic supporting work flow and processes. Collects information and performs market survey and industry trend analyses for drilling materials and services procurement. Keeps records and analyses statistical data on material procurement, supply/consumption and stock. Performs cost analyses, and optimizes material stock inventory. Prepares reports related to material supply and services procurement.
3. Assists supervisor in preparation of activity plan and budgets controls for his Group. Assists supervisor in reviewing supply tenders/contracts under Materials Departments control. Maintains close communication with Material Department and material supply contractors. Evaluates service contractors performance.2019-12-10 11:03:15 |
Apply Now |
Design engineer
INR7"YEARLY"
Design EngineerFull Time (1-6 Yrs )WORKLOGIX MIDDLE EAST LLC |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Design of various machines and mechanical components
Experience in designing Sheetmetal based components will get preference
Knowledge on Creo / Proengineer is must
Experience on handling work independently
Pro active in finding opportunity to improve the design2019-12-10 11:03:15 |
Apply Now |
Safetyengineer
INR7"YEARLY"
SafetyEngineerFull Time (3-5 Yrs )KingFahdUniversityofPetroleumMinerals |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09The Safety engineer will be responsible for the overall coordination and implementation of safety programs to ensure compliance with regulatory agency guidelines and ensure safe working conditions for all employees and residents. Position will plan, implement, and coordinate safety programs, requiring application of engineering principles, to prevent or correct unsafe working conditions and improve overall safety record of the university. This position will be expected to implement best practices regarding safety standards.2019-12-10 11:03:15 |
Apply Now |
PowerPlantOperator
INR300040003000-4000"YEARLY"
PowerPlantOperatorFull Time (0-3 Yrs )ConfidentialCompany |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09The Power Plant Operator will require a range of knowledge and skills, which have been acquired through formal training and experience, to provide a detailed understanding and practical experience of the technologies associated with the operation of modern gas or steam turbine plant and a wide range of auxiliary equipment.
Reporting to the Charge engineer, the post holder will be expected to be a self starter with the ability to maintain high levels of focused drive and energy who can work well with others towards the achievement of specific goals and objectives.2019-12-10 11:03:15 |
Apply Now |
Mechanical(Maintenance)engineer(Plantengineer)
INR7"YEARLY"
Mechanical(Maintenance)Engineer(PlantEngineer)Full Time (0-3 Yrs )Linde-SIGAS |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Help ensure that all plants satisfy contractual and legislative requirements by implementing best practice that results in required reliability performance of plant machinery and systems at optimal cost. Challenge the status quo and maintains a working environment of continuous improvement.
Support development and implementation of maintenance best practices, maintenance planning, procedures and critical maintenance activities in order to increase reliability and efficiency of the plants
Principal responsibilities
Establish a culture of safety in working with field operations and service providers.
Ensure management of change, engineering Management of Change (EMOC), followed for equipment modifications
Ensure that all maintenance and supply agreements are properly managed. Assess technical competency of contractors and service providers
Supervise the rectification of failed equipment including determination of root cause failure and key decision making for corrective actions. Execute in failure analysis reporting
Development and implementation of Maintenance Plans for the plants, applying Linde standards as far as applicable and identifying best practice wherever possible.
Supporting the development and implementation of Contingency Plans for the plants,
Cooperate with Global Operations expert teams
Leading maintenance planning incl. Turnarounds as well as its execution process. Give feedback to Global Operations for improvement.
Issuance of reports for all maintenance activities, keep plant documentation & information up dated and available for emergency events.
Key interfaces
Internal interfaces:
Managing Director
IPC engineer
Global Operations Team (HyCO, Reliability, Process Safety etc)
Operations Team
External interfaces:
Contractors & Machine Vendors
Service Suppliers
Local authorities2019-12-10 11:03:15 |
Apply Now |
Instrumentation&ProcessControlengineer
INR7"YEARLY"
Instrumentation&ProcessControlEngineerFull Time (0-3 Yrs )Linde-SIGAS |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09The role is
a) to ensure that all instrumentation and process control systems satisfy contractual and legislative requirements
b) to identify and implement process control and instrumentation solutions that result in continuous improvement of the plants and equipment and are consistent with Lindes global strategies and standards. The role includes maintenance and support of existing hardware, software, and equipment. To share the global best operation practice and work with the plant manager and the maintenance engineer to analyseis gaps, make plan of improvement to achieve best operation.
Principal responsibilities
Ensure that all instrumentation and Process Control Systems are maintained, meeting local regulations as well as Linde best practices
Identify shortcomings in existing regulatory control system and instrumentation and implement improvements
Support linear model predictive control (LMPC) by building hardware and software, changing control code
Manage all instrumentation & control system hardware and software records and ensure that updated information is accessible and kept in the Instrument & Process Control (I&PC) team
Auditing of instrumentation and control systems, meeting Internal and External inspection requirements
Identify obsolete equipment and develop plans to manage the obsolete equipment (spares, alternative suppliers) or upgrade control system
Closely work with the plant manager and maintenance engineer to measure and improve instrumentation and control system reliability
Supporting the development and implementation of Contingency Plans for the plants,
Cooperate with Global Operations expert teams
Training of operators and technicians in IPC
Keep all IPC related documentation up to date.
Ensure that all instrumentation work is accomplished to required codes, procedures, internal and external standards
Key interfaces
Internal interfaces:
Managing Director
Mechanical (Maintenance) engineer
Global Operations Team (HyCO, Reliability, Process Safety etc)
Operations Team
External interfaces:
Contractors & IPC Vendors
Service Suppliers
Local authorities2019-12-10 11:03:15 |
Apply Now |
Maintenance Planning engineers
INR7"YEARLY"
Maintenance Planning EngineersFull Time (10-15 Yrs )Al-Yusr Townsend & Bottum |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09engineering Graduate in Mechanical or Electrical or Instruments with minimum of 10 years experience in Refinery (or petrochemical) plants in maintenance planning and responsible for planning and scheduling activities related to preventive, predictive, corrective and shutdown maintenance activities using SAP-PM or any other CMMS program. He will be responsible for detailed planning of every maintenance job including allocation of resources - manpower, equipment, material and services, estimate man hours, estimate costs, book material thru SAP/CMMS etc., coordinate with maintenance Supervisors, Operations and other departments for preparation of job packs and scheduling the jobs when all resources are available.2019-12-10 11:03:15 |
Apply Now |
Environmental Strategic Planning Specialist
INR7"YEARLY"
Environmental Strategic Planning SpecialistFull Time (10-20 Yrs )Allen And York Middle East FZ LLC |
Al Madina Al Munawarah
,
Saudi Arabia
Saudi Arabia
0al madina al munawarah
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09The key focus of the role is to develop and implement clear, long-term departmental objectives aligned with corporate strategy and the existing EHSS regional objectives.
Responsibilities
Develop, manage, and implement strategic communications and advocacy efforts to advance the goals of the Environmental Affairs Department
Develop and maintain standard reports of on-going environmental performance for each SBU (and sub-SBU) globally. These may include weekly scorecards or dashboards, monthly performance reports for communication to business leaders, and annual year-over-year performance reports.
Review the interrelationship of Responsible Care, Corporate Social Responsibility (CSR), and Sustainability programs and projects
Review and negotiate proposals, budgets and business plans
Responsible for developing standard Strategy and Operating Procedures related to the Environmental Affairs Department activities
Review Environmental Impact Assessments (EIA), environmental management plans and reports for various projects, and support the development of environmental awareness training programs
Develop entirely new ideas based upon available information and precedents. Create new approaches, procedures, and solutions to improve current departmental operations and / or project deliverables
Â
REQUIREMENTS
Western Education & Training
Must have at least a BSc in Environmental Science or Environmental engineering
Experience (technical, functional, and/or leadership experience required)
Over 10 years of progressive experience in the environmental field, preferably in the petrochemical industry.
Can apply strategic approach to environment issues
Problem-solving and analytical troubleshooting skills2019-12-10 11:03:15 |
Apply Now |
Computer Operating Systems Specialist
INR7"YEARLY"
Computer Operating Systems SpecialistFull Time (8-9 Yrs )BRUNEL ENERGY L.L.C |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09·        8+ years of experience in information security
·        Bachelor degree in relevant subject (Information security, Computer Science, Computer engineer, IT, etc…)Â
·        Should be a Certified Forensic Analyst/ Certified Ethical Hacker (CEH)/ Computer Hacking Forensic Investigator or equivalent
·        Experience on the following area SOC and incident handling, Threat management, Forensic Analysis.
Â
Client offers excellent salary/benefits packages:
Accommodation and transportation will be provided by the client.
Family status role - Medical, Insurance and flights for you and your family will be provided
Education assistance for children
Tax free salary
 2019-12-10 11:03:15 |
Apply Now |
PROJECTCONTROLSMANAGER
INR7"YEARLY"
PROJECTCONTROLSMANAGERFull Time (0-7 Yrs )AYTB-Al-YusurTownsendandBottomCompany |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-091. Basic Function
Plan, develop, coordinate and supervise cost engineering, estimating, planning, Q.S. functions for a project or group of projects. Make decisions and recommendations that are recognized as authoritative and which have important impact on controls activities.
2. Work Performed
a) Manage/direct controls function for a large extensive project or group of projects. Includes personnel administration/ staffing activities, establishing objectives, providing technical direction and support, etc.
b) Administers cost and scheduling system; recognizes and implements enhancements/improvements to system consisting of primavera project planner for Windows, Microsoft Access Cost and Quality Reporting, and Microsoft Excel Reports and Spreadsheets.
c) Oversees and directs planners/schedulers, project cost engineers and quantity surveyors to assure adherence to corporate reporting procedures and formats.
d) Provide assistance in review of estimates and proposals for content/pricing and checks indirect costs to ensure thoroughness of bids.
e) Tracks and reports on actual versus estimated unit rates. Ensures all project cost and scheduling activities comply with company and client requirements.
f) Collaborates with division management to maintain corporate business plan, and with accounting department to ensure accurate divisional reporting in corporate reports.
g) Performs additional assignments per managements direction.
3. Work Contacts
Wide range of contacts with corporate and project management for discussion and coordination of controls/scheduling objectives. Projects primarily in Oil & Gas Facilities to include, piping, equipment erection and Turn Around.
4. Latitude for Actions or Decisions
Works under general guidelines of corporate profit objectives. Work is subject to review of executive management.
5. Supervisory Responsibility
Supervises approximately ten employees.
6. Physical Effort
Minimal physical effort.
7. Work Conditions
Works in clean, air-conditioned office environment.2019-12-10 11:03:15 |
Apply Now |
IT Advance Security (Forensic)
INR7"YEARLY"
IT Advance Security (Forensic)Full Time (10-10 Yrs )BRUNEL ENERGY L.L.C |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Experience and Qualifications Required
10 years of experience in information security
Bachelor degree in relevant subject (Information security, Computer Science, Computer engineer, IT, etc…)
One or more of the following certifications: CISSP (Certified Information Systems Security Professional), CISA (Certified Information Systems Auditor)
Â
Client offers excellent salary/benefits packages:
Accommodation and transportation will be provided by the client.
Family status role - Medical, Insurance and flights for you and your family will be provided
Education assistance for children
Tax free salary2019-12-10 11:03:15 |
Apply Now |
IT Systems Analyst
INR7"YEARLY"
IT Systems AnalystFull Time (8-10 Yrs )BRUNEL ENERGY L.L.C |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Experience and Qualifications Required
8+ years of experience in information security
Bachelor degree in relevant subject (Information security, Computer Science, Computer engineer, IT, etc…), MCSE, MCITP, CISSP, CEH, CISA, SANS Certified, Certified Ethical Hacker
Expert in Windows Security, Forensic analysis/investigation, Active Directory, Vulnerability & Compliance Assessment processes and tools, Shell scripting, and log analysis
Â
Client offers excellent salary/benefits packages:
Accommodation and transportation will be provided by the client.
Family status role - Medical, Insurance and flights for you and your family will be provided
Education assistance for children
Tax free salary2019-12-10 11:03:15 |
Apply Now |
Senior Operating Systems Specialist (Network Security)
INR7"YEARLY"
Senior Operating Systems Specialist (Network Security)Full Time (8-10 Yrs )BRUNEL ENERGY L.L.C |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Experience and Qualifications Required
8+ years of overall network security experience. Hands on experience with firewalls, routing, switching, Wireless LANs, and proxies. Experience in performing vulnerability assessment and penetration testing on network devices.
Bachelor degree in relevant subject (Information security, Computer Science, Computer engineer, IT, etc…) Â
Â
One or more of the following certifications:Â Â Â Â Â Â Â Â Â Â
- GIAC Information Security Professional (GISP)
- GIAC Certified Enterprise Defender (GCED)
- GIAC Certified Penetration Tester (GPEN)
- GIAC Assessing Wireless Networks (GAWN)
- GIAC Systems and Network Auditor (GSNA)
- Certified Ethical Hacker (CEH)
- Computer Hacking Forensic Investigator
- EC-Council Certified Security Analyst
- Licensed Penetration Tester
Â
Client offers excellent salary/benefits packages:
Accommodation and transportation will be provided by the client.
Family status role - Medical, Insurance and flights for you and your family will be provided
Education assistance for children
Tax free salary2019-12-10 11:03:15 |
Apply Now |
Senior Operating Systems Specialist (Unix/Linux Security Auditor)
INR7"YEARLY"
Senior Operating Systems Specialist (Unix/Linux Security Auditor)Full Time (8-9 Yrs )BRUNEL ENERGY L.L.C |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Experience and Qualifications Required
8+ Years of hands-on experience on Solaris, Unix, Linux, and AIX platforms. Experience hardening UNIX/Linux environments. Strong understanding of security concepts, best practices, and tools. Solid understanding of networked computing environment concepts.
Hands on experience in deploying and maintaining UNIX/Linux environments.
Experience in using tools such as Nessus, Nmap, and others.
Bachelor degree in relevant subject (Information security, Computer Science, Computer engineer, IT, etc…) Â
One or more of the following certifications:Â Â Â Â Â Â Â Â Â Â
- GIAC Information Security Professional (GISP)
- GIAC Certified Enterprise Defender (GCED)
- GIAC Certified Penetration Tester (GPEN)
- GIAC Assessing Wireless Networks (GAWN)
- GIAC Systems and Network Auditor (GSNA)
- Certified Ethical Hacker (CEH)
- Computer Hacking Forensic Investigator
- EC-Council Certified Security Analyst
- Licensed Penetration Tester
Â
Client offers excellent salary/benefits packages:
Accommodation and transportation will be provided by the client.
Family status role - Medical, Insurance and flights for you and your family will be provided
Education assistance for children
Tax free salary2019-12-10 11:03:15 |
Apply Now |
Lead Civil engineer.
INR7"YEARLY"
Lead Civil engineer.Full Time (10-15 Yrs )Alrabiah & Partners Co |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Well-versed in design
standards, codes (preferably American codes & standards) and calculations.
Must be well versed in using computer programs like MS Office and design of
utilities, water & sanitary irrigation systems, rough grading, drainage
system, etc.2019-12-10 11:03:15 |
Apply Now |
Piping Design engineer - Jubail, Saudi Arabia
INR7"YEARLY"
Piping Design Engineer - Jubail, Saudi ArabiaFull Time (5-10 Yrs )Descon Engineering Ltd |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09The successful candidate should have the knowledge to precede the job from FEED engineering to Detail engineering and must have hands on experience for using CAESAR along with any plant design software like CAD Works/PDS. Strong knowledge of world well known codes and standards like ASME B31.3, ASME B31.8 etc. is a must.
Expatriates applying for job in possession of TRANSFERRABLE IQAMA are preferred.2019-12-10 11:03:15 |
Apply Now |
Project Planning & Controls Manager
INR7"YEARLY"
Project Planning & Controls ManagerFull Time (7-17 Yrs )Contracting and Construction Enterprises |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Degree in Mechanical engineering with 7 - 10 years experience in Medium to large Oil & Gas Process Plant Construction projects. Should have experience in planning and scheduling, formulation of work breakdown structures, weight age allocation, resource planning, billing & monitoring construction work. Experience in working with Major EPC / Construction companies and exposure to major Indian / International project Consultants essential. Should have worked as Planning engineer for at least 2 major EPC Projects. Knowledge of project management tools like PRIMAVERA, MS Projects & thorough knowledge of computer applications related to planning essential. Experience in gulf region for 3 years is essential. Degree in Mechanical engineering with 7 - 10 years experience in Medium to large Oil & Gas Process Plant Construction projects. Should have experience in planning and scheduling, formulation of work breakdown structures, weight age allocation, resource planning, billing & monitoring construction work. Experience in working with Major EPC / Construction companies and exposure to major Indian / International project Consultants essential. Should have worked as Planning engineer for at least 2 major EPC Projects. Knowledge of project management tools like PRIMAVERA, MS Projects & thorough knowledge of computer applications related to planning essential. Experience in gulf region for 3 years is essential.2019-12-10 11:03:15 |
Apply Now |
Lead Telecom. Engr
INR7"YEARLY"
Lead Telecom. EngrFull Time (10-15 Yrs )Confidential |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Well-versed in design
standards, codes (preferably American codes & standards) and calculations.
He must also have good knowledge in the design of Building Management Systems
(BMS) works with expertise in the overall of (Direct Digital Control of HVAC
systems, computer system security, all control & interlock wiring, communication
wiring), etc. Must be well versed in using computer programs like MS Office and
Communcation Design. 2019-12-10 11:03:15 |
Apply Now |
Lead Mechanical engineer.
INR7"YEARLY"
Lead Mechanical engineer.Full Time (10-15 Yrs )Alrabiah & Partners Co |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Well-versed in design
standards, codes (preferably American codes & standards) and calculations.
Must be well versed in using computer programs like MS Office and mechanical
design programs for HVAC, pipe design, Fire Fighting Systems viz. Elite, HAP,
etc. 2019-12-10 11:03:15 |
Apply Now |
Testing & Commissioning engineer - Power System Soutions
INR7"YEARLY"
Testing & Commissioning Engineer - Power System SoutionsFull Time (4-8 Yrs )Saudi Transformers Company |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09- Technical and commercial activities related to testing & commissioning of Power Factor Correction Equipment, covering Capacitor Bank Equipment with Filter Reactor and associated protection and control system, other VAR compensators, neutral grounding resistor, including FAT & SAT, coordination of activities, field measurements, etc, preparation of procedures and related documentations.2019-12-10 11:03:15 |
Apply Now |
Career Opportunities for Fresh Graduates - Saudi Nationals Only
INR7"YEARLY"
Career Opportunities for Fresh Graduates - Saudi Nationals OnlyFull Time (0-1 Yrs )Descon Engineering Ltd |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09We are looking for young smart and results-oriented Saudi Nationals in the field of engineering (Mechanical, Chemical, Electrical,) and Business Support (Marketing, Finance, Accountancy, Human Resource, Administration) for our offices and sites in Jubail and Yanbu.
Requirements:
·        Applicants should be a Saudi national.
·        Candidates should be a fresh graduate from well reputed universities local and abroad with at least relevant internships program.
·        Proficient with Microsoft Office including Outlook, Excel, Word and PowerPoint.
·        Excellent English communication skill (spoken & written) is a must.
·        Strong interpersonal skills.
·        Energetic and committed to achieve team goals.
Explore career opportunities with ODICO. We offer a competitive compensation package and provide a conducive and healthy working environment. We are an equal employment opportunity employer. 2019-12-10 11:03:15 |
Apply Now |
Senior ETL Developer (SQL / SSIS)
INR7"YEARLY"
Senior ETL Developer (SQL / SSIS)Full Time (5-12 Yrs )Talent Leaders |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09The candidate should works as part of a project team to develop and deliver software systems and ETL Packages used within the solutions. Individual has well rounded knowledge and experience in IT and strong knowledge of Relational Database Design, MS SQL Server 2005/2008, MS SSIS, ETL Development, Web Services and database technologies. Candidate is preferred to have experience on MS BI spectrum technologies such as MS SSAS & SSRS, though it's not mandatory.
Job Responsibilities :
·        Design the ETL packages which involve data consolidation from multiple sources and document the designÂ
·        Development of the packages based on captured design       Â
           Develop Web Services to expose DB objects as web services or Consume Web Services in ETL Packages to fulfill different integration needs.Â
·        Unit test the packages to insure that implemented packages support the business process.
 ·        Produce different documentation requirements such as High Level Design, Unit Test Specs/Results, etc.Â
·        Monitor and report on task status, identify issues that may hinder fulfillment of the task, recommend and implement corrective measures.Â
·        Work directly with the project team and implementation partners – if needed.Â
·        Ability to work on multiple projects/tasks at the same time
·        Work on other MS SQL technologies such as SSAS, SSRS, etc. as and when required
Required Qualifications/Skills:
·        5+ Years of experience in SSIS ETL Programming
·        5+ Years of SQL Server 2005/2008 experience and proficiency in SQL
·        5+ Years of experience as a SQL database developer       Â
            Highly Proficient in programming using Transact SQL
·        Knowledge of relational database design & development       Â
           Administration of SQL Server 2005, 2008, including the Database Engine, Integration, Analysis & Reporting Services.Â
·        3+ Years of experience in Web ServicesÂ
·        3+ Years of experience in XSD and XMLÂ
·        Good understanding of MS BI spectrum of technologies such as SSAS, SSRS, etc. Â
·        Prefer to have 2+ Years of Experience in C#/VB.Net/ASP.NETÂ
·        Understanding and basic knowledge about other RDBMS such as Oracle Â
·        Highly preferable to have understanding/exposure/experience on other ETL offerings such as Informatica.Â
·        Good communication skills2019-12-10 11:03:15 |
Apply Now |
Drilling engineer
INR7"YEARLY"
Drilling EngineerFull Time (7-13 Yrs )Al Falak |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Must Have relative Exp. in Drilling engineering and Operations. (Workover, Gas/Oil Offshore and On-shore)
Directs and controls all activities related to drilling and work over operations carried out by contractors/service companies on assigned rig.
Oversees the execution of all operational programmers and acts as company-man on assigned rig covering drilling, workover, well completion and related activities.
Directs and supervises the implementation of various operational programmers including proposing and executing amendments to approved programmers in response to changing operational parameters.
Implements the Company's Health, Safety & Environmental Protection policies and safety management system as applicable to rig operation.
Monitors all supply activities of Company materials and equipment to ensure economic and cost effective utilization.2019-12-10 11:03:15 |
Apply Now |
petroleum engineer
INR7"YEARLY"
Petroleum EngineerFull Time (10-15 Yrs )Al Falak |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Write drilling, testing, completing, and workover programs for vertical and horizontal oil and high pressure deep gas wells.
Provide technical field support on all related jobs on the rigs.
Provide technical advice and guidance for more efficient and cost effective onshore and offshore drilling and workover operations.
Specialize in Drilling and Completion Fluids.
Exp. In all phases of Drilling and Workover engineering.
Specify design criteria and relevant operating parameters for development of budget items (BIs) and/or new projects within his area of expertise.
Recommend, design, oversee suitable outside investigations to resolve problems which exceed current engineering knowledge in his specialty.2019-12-10 11:03:15 |
Apply Now |
Project engineer-Civil
INR7"YEARLY"
Project Engineer-CivilFull Time (10-12 Yrs )Client of Propel consultant |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Company
One of our leading Client -Supplemental Manpower Consultant , looking for Project engineer-Civil - to be based in Khobar - KSA, with the following J.D
Duties & Responsibilities:
Responsible for construction site and management project.
Qualifications & Experience:
BS. Civil engineering
Minimum 10 years
Experience in Saudi Arabia is preferred2019-12-10 11:03:15 |
Apply Now |
Piping Inspector
INR7"YEARLY"
Piping InspectorFull Time (2-8 Yrs )Core Team Global |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Ensure that engineering is carried out in accordance with company procedures and contractual requirements to the agreed budget and schedule and in compliance with the EHS requirements. Identify and manage design changes.
Liaise and co-operate with all members of project team.
Report to the project management on progress, including any problems, technical or otherwise, particularly with regard to costs, working hours, programme milestones and resources and to their Lead engineer on resource requirements.2019-12-10 11:03:15 |
Apply Now |
Project engineer - Civil
INR7"YEARLY"
Project Engineer - CivilFull Time (Fresher )Al Gosaibi Foods Company |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09To provide special civil engineering skills and services to the Projects Department of Operations Division,by ensuring the design and implementation of civil works within projects meet the Almarai specifications for Civil engineering and good manufacturing practice.
Areas of Responsibility (AOR)
1. Design new civil infrastructures to meet plant expansions and modification requirements
2. Evaluate contractors proposals to ensure economical and technical compliance
3. Monitor contractors work to comply with company quality standards
4. Maintain safety measures to ensure minimal accidents
5. Coordinate with other departments to implement smooth handing over of projects without delay
6. Solve site problems to avoid completion delay
7. Provide technical guidance to enhance subordinates capabilities
8. Increase involvement in the automation component of projects
9. Ensure that the PM is informed / appraised of Civil Project work activity/scheduling and work progress.
10. Coordinating with Contractors to ensure timely completion of projects2019-12-10 11:03:15 |
Apply Now |
Principal Procurement/Material engineer
INR7"YEARLY"
Principal Procurement/Material EngineerFull Time (12-14 Yrs )Eram Engineering |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Directly responsible for the oversight of the Procurement and Materials team and the profit/loss of a revenue center, major product line, or support function. Accountable for the overall identification of Procurement and Material resources for business requirements. Develops, implements, and enforces the compliance of company global procurement and materials policies, builds supplier rapport, negotiates with strategic suppliers, and coordinates activities to meet the needs and productivity of an operation. Under broad direction, is accountable for the performance and results of multiple related disciplines or sub-groups within a function. Manages the delivery of functional objectives by providing leadership and direction to senior managers or professional staff. Participates in the development of functional strategy and is responsible for global processes and procedures. Skills required for this job are typically acquired through the completion of an undergraduate degree and 12+ years of experience, 4 of which should be in management.2019-12-10 11:03:15 |
Apply Now |
Instrument and Control engineering Specialist
INR7"YEARLY"
Instrument and Control Engineering SpecialistFull Time (12-15 Yrs )Eram Engineering |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Reports to: engineering Section Supervisor
Division: Technical Support
Department: ESD - engineering Support Department
Business Line: Projects & engineering
JOB PURPOSE:
To provide technical consultancy and advice on Instrument engineering matters in order to address issues which require a high degree of technical expertise for engineering study and design functions
To develop and maintain the engineering standards, methods, codes, practices, and techniques which are not clearly defined.
MAIN ACCOUNTABILITIES:
Policies, Processes and Procedures
Applies approved section policies, processes, and procedures and monitors adherence so that work is carried out in a controlled manner
Day- to-day operations
Applies the day-to-day operations assigned for the technical support department to ensure compliance with the established standards and procedures
Technical Support and engineering Problems
Provides in-house consultation and technical advice to ESD and other KJO departments
Anticipates and solves unprecedented engineering problems
Plans and develops engineering projects with unique engineering problems involving clarification of subject matter, definition of scope, investigation and development of novel concepts and approaches
Technical Standards and Assignments
Acts independently on technical matters
Interprets standards and all other technical and code to ensure Company standards are maintained
Performs complex specialised engineering assignments as technical expert
Purchase Requests and Bid Summaries
Reviews/ initiates equipment quotation, purchase requests and prepare bid summaries
Procurement
Inspects equipment at factory to ensure compliance with specifications and procurement documents
Project Management and Cost Control
Implements project cost control procedures for the engineering group control to ensure project costs are controlled within budgets
Training
Provides mentoring leadership and support in the development of other less experienced engineers
Functions as a mentor for the STDP employees in instrumentation and control to ensure capability development
Reporting
Assists in the preparation of timely and accurate reports for section in order to meet Company and section requirements, policies and standards
Safety, Health & Environment
Complies with all relevant safety, health and environmental procedures to ensure a healthy and safe work environment
Related Assignments
Performs other related duties or assignments as directed
May be assigned reasonable special administrative or technical duties
Undertakes the responsibilities of the Instrument & Control engineer, when required, to ensure smooth and uninterrupted flow of work
Key Results :
Adherence to the department policies, processes and procedures
Smooth flow of day-to-day operations
Quality of in-house consultation and technical advice, as reflected by acceptance of advice by Management
Quality and speed in problem resolution
Customer satisfaction
Quality of interpretation of technical and code requirements
Quality of completing engineering assignments
Equipment quotation, purchase requests are reviewed timely and in accordance with specifications
Compliance with specifications and procurement documents during inspections
Project Costs are controlled within budgets
Effective Leadership is demonstrated through adequately trained engineers for back up and replacement
Key information captured accurately and presented to decision-makers in a timely manner
Healthy and safe work environment
Line managers feedback
Effective back up provided in the absence of the Instrument & Control engineer to keep work running smoothly.
APPLICATION OF GUIDELINES & DECISION MAKING AUTHORITY:
Guidelines:
Thinking within specific procedures and practices with available assistance
Decision making:
Operating within given practices and procedures. Work is reviewed periodically.
COMMUNICATIONS & WORKING RELATIONSHIPS:
Internal:
Instrument engineering Specialist and other engineers in Technical Support, all proponent departments e.g. PCD, Production, Maintenance, CPD, CTD, CBD, FAD, Environment Departments, ISD, TMD
External:
Contractors, approved Vendors, ARAMCO for standards.2019-12-10 11:03:15 |
Apply Now |
Discipline engineer
INR7"YEARLY"
Discipline EngineerFull Time (5-8 Yrs )Eram Engineering |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Has experience in the oil and/or gas industry or similar process industry and is recognized as specialist in a specific engineering field on large to mega projects. Prepares and reviews engineering studies, design drawings and documents, and material and equipment specifications. Resolves specialty related engineering issues by applying accepted principles, codes, and standards. Must have thorough knowledge of engineering practices and economic principles, calculation methods, design details, international codes and standards, procedures, and specifications.2019-12-10 11:03:15 |
Apply Now |
Consultant engineer
INR7"YEARLY"
Consultant EngineerFull Time (25-30 Yrs )Eram Engineering |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Has experience in the oil and/or gas industry or similar process industry and is recognized as specialist in a specific engineering field on large to mega projects. Provides technical and consultant support as required. Prepares and reviews design drawings and documents, and material and equipment specifications. Resolves specialty related engineering issues by applying accepted principles, codes, and standards. Must have thorough knowledge of engineering practices and economic principles, calculation methods, design details, international codes and standards, procedures, and specifications.
Experience : 25 & Higher Degree Or Equiv.2019-12-10 11:03:15 |
Apply Now |
Drilling engineer
INR7"YEARLY"
Drilling EngineerFull Time (4-8 Yrs )Eram Engineering |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09JOB PURPOSE
To conduct studies, analysis and evaluations of drilling engineering data collected at wells, and recommend methods and techniques for economical and safe operational achievement while supporting the Supervisor in developing drilling engineering activity plans while preparing various regular reports, technical reports and summaries of drilling engineering activities.
MAIN ACCOUNTABILITIES:-
Description
Policies, Processes and Procedures
Applies approved section policies, processes, and procedures and monitors adherence so that work is carried out in a controlled manner.
Day- to-day operations
Applies the day-to-day operations assigned for the Drilling engineering Section to ensure compliance with the established standards and procedures.
Coordination With Contractors
Monitors and inspects contractors activities to ensure compliance with the terms and conditions of contract, and reports any discrepancy between contract and actual work to the Supervisor.
Reviews, checks and compiles daily work reports prepared by contractors on concerned work progress and reports to the Supervisor.
Drilling engineering
Reviews and analyses various drilling engineering data, operation reports, statistics, and study reports, and recommends economical and safe measures for optimum drilling and workover operations. Monitors drilling and workover operations, and recommends operational options for trouble counter measures and improvement of operational performance.
Initiates and recommends specifications for equipment/tools, materials and supplies, supporting services, operation methods and procedures, and prognosis for drilling/workover/well completion practices.
Performs technical and safety inspection of drilling rigs, equipment and associated services.
Collects latest information of new technologies and methods in drilling engineering, and recommends application of such technology/method to Companys operation.
Coordinates with System engineers for maintenance of computer system, IT network, drilling engineering application software and database.
Material Assessment
Coordinates with Material & Supply Section procurement of material requirements for well drilling, workover and maintenance activities and executes scheduling and allocation of materials & spares to ensure that operations are adequately and timely supported with required resources for timely completion of tasks.
Keeps track of resource consumption during execution of drilling operations and activities.
Contracts Management
Coordinate with contractors and inspects Drilling & Marine equipments of jack-up rig by 3rd party rig inspection service provider to ensure compliance with the terms and conditions of contract, and reports any discrepancy between contract and actual work to his supervisor.
Reviews, checks & compiles daily work reports/field service tickets prepared by contractors on work progress and reports to the Supervisor.
Reporting
Prepares section reports in a timely and accurate manner to meet Company and section requirements, policies and standards.
Collates and reviews various documents such as work completion reports, overtime reports, time sheets, requisitions and authorization for projects, supplies and outside servces submitted by colleague and contractors and prepares a variety of regular activity reports, statistics, technical summaries and other technical reports.
Budget
Assists the Supervisor in annual budget preparation, review and control on expenditures, focusing on all Drilling & Workover operation and contracts in line with Departmental goals.
Safety, Health & Environment
Complies with all relevant safety, health and environmental procedures to ensure a healthy and safe work environment
Related Assignments
Performs other related duties or assignments as directed.
Key Results
Adherence to the department policies, processes and procedures.
Smooth flow of day-to-day operations.
Efficient coordination with contractors and various service providers.
Accuracy of analysis and robustness of the engineering inputs.
Most optimized engineering parameters adopted as per reservoir requirements.
Well Programs are documented comprehensively and meets Company objectives.
Adherence to approved policy, procedures & standards.
Timely and accurate procurement of material.
All procured material & tools are well accounted for.
Efficient coordination with contractors and various service providers.
All department reports are prepared in a timely and accurate manner and meet company policies and requirements
Financial variance versus budget
Accuracy of data and contribution towards budget
Healthy and safe work environment
Line managers feedback
APPLICATION OF GUIDELINES & DECISION MAKING AUTHORITY :-
Guidelines:
Thinking within diversified yet well defined procedures with available assistance
Decision making:
Operating within standard practices and procedures. Key end results are reviewed periodically
COMMUNICATIONS & WORKING RELATIONSHIPS : -
Internal:
Communicates with Drilling engineering Section Supervisor and other engineers within the section on a daily basis. Extensive communication with Drilling Operations Section engineers, Technicians and Operators. Frequent coordination with other departments like Materials, Contracts, Finance, ESD,OND, OFD, PCD, etc.
External:
Regular coordination with Contractors, Service providers, External Inspectors and Auditors2019-12-10 11:03:15 |
Apply Now |
Lead Discipline engineer
INR7"YEARLY"
Lead Discipline EngineerFull Time (0-15 Yrs )Eram Engineering |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Has experience in the oil and/or gas industry or similar process industry and is recognized as specialist in a specific engineering field on large to mega projects. Coordinates with project discipline, and lead engineers to ensure correct implementation of the design for his engineering specialty and coordinates the work of engineers within his specialty. Prepares and reviews engineering studies, design drawings and documents, and material and equipment specifications. Resolves specialty related engineering issues by applying accepted principles, codes, and standards. Must have thorough knowledge of engineering practices and economic principles, calculation methods, design details, international codes and standards, procedures, and specifications.2019-12-10 11:03:15 |
Apply Now |
Estimating engineer
INR7"YEARLY"
Estimating EngineerFull Time (0-5 Yrs )Eram Engineering |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Has experience in the oil and/or gas industry or similar process industry and has cost estimating experience on large projects. Responsible for the correct implementation of cost estimating procedures and requirements. Reviews and closely monitors the development of the cost estimate to ensure objectives are met. Must have thorough knowledge of cost estimating practices, calculation methods/software, standards, and procedures.2019-12-10 11:03:15 |
Apply Now |
Supervising Estimating engineer
INR7"YEARLY"
Supervising Estimating EngineerFull Time (15-20 Yrs )Eram Engineering |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Has experience in the oil and/or gas industry or similar process industry and has cost estimating experience on large to mega projects. Coordinates with project managers and project engineers and supervises cost estimating engineers to ensure correct implementation of cost estimating procedures and requirements. Reviews and closely monitors the development of the cost estimate to ensure objectives are met. Must have thorough knowledge of cost estimating practices, calculation methods/software, standards, and procedures.2019-12-10 11:03:15 |
Apply Now |
Contract engineer
INR7"YEARLY"
Contract EngineerFull Time (10-15 Yrs )Eram Engineering |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Has experience in the oil and/or gas industry or similar process industry and has project contracting experience on large to mega projects. Coordinates contracting activities to ensure correct implementation of procedures and requirements in support of the project objectives. Must have thorough knowledge of project contracting practices, methods, standards, and procedures.2019-12-10 11:03:15 |
Apply Now |
Senior Project engineer
INR7"YEARLY"
Senior Project EngineerFull Time (0-10 Yrs )Eram Engineering |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Has experience in the oil and/or gas industry or similar process industry and has project engineering experience on large to mega projects. Coordinates with engineering discipline lead engineers and/or task force groups to ensure on-time completion of work activities and the implementation of project control procedures. Reviews and closely monitors project schedule and costs. Must have thorough knowledge of project engineering practices, design details, international codes and standards, procedures and specifications.2019-12-10 11:03:15 |
Apply Now |
Principal Discipline engineer
INR7"YEARLY"
Principal Discipline EngineerFull Time (20-22 Yrs )Eram Engineering |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Has experience in the oil and/or gas industry or similar process industry and is recognized as specialist in a specific engineering field on large to mega projects. Coordinates with project discipline lead engineers to ensure correct implementation of the design for his engineering specialty and coordinates the work of engineers within his specialty. Prepares and reviews engineering studies, design drawings and documents, and material and equipment specifications. Resolves specialty related engineering issues by applying accepted principles, codes, and standards. Must have thorough knowledge of engineering practices and economic principles, calculation methods, design details, international codes and standards, procedures, and specifications.2019-12-10 11:03:15 |
Apply Now |
Mechanic
INR7"YEARLY"
MechanicFull Time (5-10 Yrs )SADAFCO (Saudia Dairy and Foodstuff Company) |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
,
Not Mentioned
saudi arabia
0saudi arabia
Jeddah
Saudi Arabia
Saudi Arabia
0jeddah
|
10-12-2019 2020-03-09Purpose of the job
Perform preventative maintenance activity on all processing equipment, in order to attend to any breakdown happening to keep downtime of machines at a lower level
Key Accountabilities
1. Maintenance
Perform preventative maintenance activity for production equipment, in order to carry out the standard maintenance schedule and minimize machinery breakdown
2. Health & Safety
Ensure a clean and safe work area and potential risks are communicated for corrective action in order to follow the companys health & safety policy
3. Reporting
Prepare and fill up all required information in maintenance sheet/ report, in order to record any abnormal events happening in the process of equipment and/ or machine
Job Requirements
Educational level: Diploma in Mechanical engineer or similar
Specific diploma/education: none
Minimal experience: 2-5 years
Languages: English2019-12-10 11:03:15 |
Apply Now |
Traffic Operation engineer - Road or Highways
INR7"YEARLY"
Traffic Operation Engineer - Road or HighwaysFull Time (10-16 Yrs )Abdurahman Al Shalawi est for contratcing |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Registration as a PTOE is mandatory , ten years of practical experience in operating and managing a municipal city wide Centralized Traffic Management System . Complete familiarity with latest ASSTHO , ITE , standards and NTCIP protocols. Practical experience must include traffic signal equipment. Work experience with NEMA standard traffic signal equipment . Work experience must include traffic engineering studies , traffic safety audit and roadway geometric design.2019-12-10 11:03:15 |
Apply Now |
Civil engineer
INR7"YEARLY"
Civil EngineerFull Time (5-10 Yrs )Abdurahman Al Shalawi est for contratcing |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Candidate shall have 5 years of exp. in street lightning maintenance with municipal govt highway departments.2019-12-10 11:03:15 |
Apply Now |
Sr. Operation engineer - Transportation , Road or Highways
INR100170001001-7000"YEARLY"
Sr. Operation Engineer - Transportation , Road or HighwaysFull Time (10-16 Yrs )Al Shalawi Holding |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Candidate shoul have 10 years of experience in all facets of transporatation engineering including traffic engineering , highway geomatric design, transporation management system planning. Experience shall include maintenace and operation of traffic signal and lightning system , traffic accident , traffic time and delay , parking, roadway capacity and travel speed .2019-12-10 11:03:15 |
Apply Now |
Sr.Maintenance engineer - Transportation Road or Highways
INR7"YEARLY"
Sr.Maintenance Engineer - Transportation Road or HighwaysFull Time (10-16 Yrs )Al Shalawi Holding |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Candidate should have 10 years experience in road maintenance supervision with a municipality. He shall have a through knowledge of applicable design principles and procedures and shall be well versed in conducting studies and inspection .He will be responsible for the managemnent of field operations and engineering activities concerning maintenance of the road structure.2019-12-10 11:03:15 |
Apply Now |
Sr.Technical engineer - Road or Highways
INR7"YEARLY"
Sr.Technical Engineer - Road or HighwaysFull Time (10-16 Yrs )Al Shalawi Holding |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Candidate should have 10 years of exp in road design, which shall include pavement, bridge and box culvert structures and drainage systems. He should have min 5 years of experience with municipal government highway department as a designer.2019-12-10 11:03:15 |
Apply Now |
Traffic Safety engineer
INR7"YEARLY"
Traffic Safety EngineerFull Time (5-10 Yrs )Abdurahman Al Shalawi est for contratcing |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Candidate should have 5 years exp. including 3 years with a municipal govt. Experience should include traffic engineering studies for intersection improvement , traffic signal design and operation , pavement making design , transpiration system travel forecasts, geometric highway design , intersection channelization and application of state-of-art traffic/transpiration engineering computer software ,NEMA requirements and AASTHO/ MUTCD standards.2019-12-10 11:03:15 |
Apply Now |
Traffic engineer
INR7"YEARLY"
Traffic EngineerFull Time (5-10 Yrs )Abdurahman Al Shalawi est for contratcing |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Candidate Should have experience in all facets of transportation engineering including traffic engineering, highway geometric design, transportation system planning. Experience shall include maintenance and operation of traffic signal and lightning systems, traffic programs travel time and delay , parking ,roadway capicity and travel speed . Complete familiarity with application of state of the art traffic engineering and transportation planing computer software ,NEMA,MUTCD, and AASTHO standards. At least two years experience should be with municipal govt highway departments.2019-12-10 11:03:15 |
Apply Now |
Mechanical Site engineer
INR7"YEARLY"
Mechanical Site EngineerFull Time (10-15 Yrs )Confidential Company |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Minimum 10 years site supervision experience with at least 5 years in supervision of infrastructure projects,high rised structures,pumping stations and laying of pipelines of large diameter. Must be well versed in using computer programs like MS Office2019-12-10 11:03:15 |
Apply Now |
Environmental Noise & Vibration engineer
INR7"YEARLY"
Environmental Noise & Vibration EngineerFull Time (3-8 Yrs )SEW |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Our Air Quality and Noise Management team members have the opportunity to be involved in a variety of projects that may include noise impact assessments, noise modeling, noise source characterization, ambient noise monitoring, ambient noise data analysis, noise monitoring program design, and regulatory approvals and reporting. We are seeking exceptionally talented and enthusiastic individuals with a keen interest in the natural sciences to join our team and advance their career.
Our office in Al Khobar has an opportunity for a Noise and Vibration engineer. If you are client and service focused and have strong business development experience, then we have a dynamic work environment where you can play a pivotal role in our Air and Noise team.
Responsibilities:
Conduct technical noise assessments, including noise source characterization, and noise modeling and evaluation
Grow the noise and vibration service area
Provide technical guidance and mentorship to junior noise staff
QA/QC and senior review of technical project work
Knowledge and capability to perform noise and vibration testing of rotating equipment
Basic understanding of acoustics and vibration
Experience with various transducers associated acoustic and vibration measurements
Ability to communicate on a professional level regarding noise and vibration test results
Prepare proposals, marketing materials, and/or technical papers
Consulting with and answering technical questions from scientists, engineers, project managers, and external clients
In-depth knowledge of the techniques, methods and procedures of conducting Noise Survey in Industrial Plant and Urban Areas
Knowledge of OSHA standards with sound knowledge in data processing and data acquisition
Extensive Experience in Noise Analyzers and Environmental
Experience with BKSV data acquisition and analysis software packages
Project management including:
o Client management and coordination
o Project budget tracking and cost control
o Work task delegation
o Writing and reviewing reports
Qualifications:
BScs/Masters degree in engineering, Physics or a relevant discipline
Minimum of 4 years consulting experience
Familiar with a variety of sound and vibration measurement instruments and modeling software
Experience with environmental, industrial, and transportation noise and vibration assessment
Demonstrated strength in verbal and written communication
Demonstrated success in business development
Experience leading project teams
Strong commitment to client service and quality
Proven ability to successfully meet deadlines and manage a number of projects at once2019-12-10 11:03:15 |
Apply Now |
Data Collection & Warehouse Technician
INR7"YEARLY"
Data Collection & Warehouse TechnicianFull Time (5-10 Yrs )Utopia Global INC |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Data
Collection & Warehouse Technician (10 Positions)
Â
Type of Employment         : Contract(Duration : 6 months)
Location                : Jubail, Saudi Arabia
Requirement & Job
Description:
Â
·       Â
Mechanical
engineer with the ability to validate that tags shown in engineering documents
correctly correspond to equipment and materials as shown in SAP System
·       Â
Physically
capable of crawling into warehouse bins including racks that may be 10 or more
feet above a concrete warehouse floor
·       Â
Experience
in using a digital camera and uploading images
·       Â
Experience
using handheld data capture devices and barcode printers/readers
Â
Education/Experience:
·       Â
Mechanical
engineer with a minimum of 5 years in Petrochemical or Manufacturing or Oil and
gas industry.
·       Â
In-depth
Knowledge in Data Collection and Data management.
·       Â
Proven
track record in data collection
·       Â
Very
good Excel skills.
·       Â
Possess
excellent interpersonal, analytical, and communication skills.
·       Â
High
degree of integrity and ethics.
Â
Compensation:
·       Â
Opportunity
offers a compensation package that comprises of a strong salary. Additional
benefits include vacation, traditional holidays, medical and dental insurance
Â
If the
profile interests you kindly share your profile at vrajan(at)utopiainc(dot)com.2019-12-10 11:03:15 |
Apply Now |
Data Collection & Warehouse Lead
INR7"YEARLY"
Data Collection & Warehouse LeadFull Time (7-12 Yrs )Utopia Global INC |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Data
Collection & Warehouse Lead (2 Positions)
Â
Type of Employment         : Contract(Duration : 6 months)
Location                             :
Jubail, Saudi Arabia.
Client                                 : PetroChemical
Â
Requirement & Job Description:
Â
·       Â
Mechanical engineer with the ability to validate that tags shown in
engineering documents correctly correspond to equipment and materials as shown
in the SAP System.
·       Â
Experience working in a large warehouse with hundreds of parts bins,
preferably using hand held devices and bar coded bins
·       Â
Good communication and organizational skills: required to work with
customer warehouse staff and lead the data collection team
Â
Education/Experience:
·       Â
Mechanical
engineer with a minimum of 10 years in Petrochemical, Manufacturing or Oil and
gas industry.
·       Â
In-depth
Knowledge in Data Collection and Data management.
·       Â
Proven track record in data collection
·       Â
Very
good Excel skills.
·       Â
Possess
excellent interpersonal, analytical, and communication skills.
·       Â
High
degree of integrity and ethics.
Â
Compensation:
·       Â
Opportunity
offers a compensation package that comprises of a strong salary. Additional
benefits include vacation, traditional holidays, medical and dental insurance
Â
If the
profile interests you kindly share your profile at vrajan(at)utopiainc(dot)com.
Â
Or if you have
any friend who would be intrtesd for the role forward the and I will take it
further.2019-12-10 11:03:15 |
Apply Now |
Substation Design engineer
INR7"YEARLY"
Substation Design EngineerFull Time (3-8 Yrs )Saudi Power Transmission Company |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Substation Design engineer
Function:
Be a self-sufficient member of the substation design team.
Compilation of preliminary and detailed design packages for Distribution substations including all design aspects.
Provide technical support to construction teams during construction of Substations.
Present substation designs to Client design review forums.
Participate in the development of new design tools such as Bentley Substation.
Continuously improve all aspects of substation design processes.
Participate in renewable energy projects and integration into Eskom Networks.
Qualifications:
B.Eng (Elec), BSc Eng (Elec). B.Tech Electrical
Experience Required:
2-5 years of industry related experience.
Special Skills:
Bentley Microstation,CAD,AutoCAD
Microsoft Excel programming.
Ability to liaise with Management and Clients at all levels.
Ability to work under pressure
Excellent communication skills2019-12-10 11:03:15 |
Apply Now |
Electrical engineer O & G
INR7"YEARLY"
Electrical Engineer O & GFull Time (7-14 Yrs )Sofcon Group |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Electrical Design engineer with 7 + years experience in Field Support and construction experience in Oil & Gas Projects and refinery services specializing in Detailed Design engineering to provide onsite technical Support2019-12-10 11:03:15 |
Apply Now |
Electrical Design engineer
INR7"YEARLY"
Electrical Design EngineerFull Time (8-15 Yrs )Sofcon Group |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Electrical Design engineer with 8 + years in Electrical Design in Power Distribution Project with ETAP software experience.2019-12-10 11:03:15 |
Apply Now |
SUPERINTENDENTREVERSEOSMOSIS-LeadingmultinationalWatercompany-AllNationalities
INR7"YEARLY"
SUPERINTENDENTREVERSEOSMOSIS-LeadingmultinationalWatercompany-AllNationalitiesFull Time (0-5 Yrs )ConfidentialCompany |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09+ NEW VACANCY +
SUPERINTENDENT REVERSE OSMOSIS
Leading multinational Water company
In Saudi
All Nationalities
Our client is a leading international Western Water and Wastewater company working across the Middle East. They are a highly respected company with a great reputation and have a large multicultural workforce.
We are looking for an experienced Reverse Osmosis expert to join their team as the Superintendent/ Lead engineer in the Eastern Province, Saudi Arabia.
COMPENSATION & BENEFITS
Salary will reflect interview performance and experience levels2019-12-10 11:03:15 |
Apply Now |
LEADengineer/SENIOR:INDUSTRIALWATERNETWORK-Leadingmultinationalcompany-AllNationalities
INR7"YEARLY"
LEADENGINEER/SENIOR:INDUSTRIALWATERNETWORK-Leadingmultinationalcompany-AllNationalitiesFull Time (0-5 Yrs )ConfidentialCompany |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09+ NEW VACANCY +
LEAD engineer/ SENIOR: INDUSTRIAL WATER NETWORK
Leading multinational company
In Saudi
All Nationalities
Our client is a leading international Western Water and Wastewater company working across the Middle East. They are a highly respected company with a great reputation and have a large multicultural workforce.
We are looking for an experienced LEAD engineer/ SENIOR: INDUSTRIAL WATER NETWORK to join their team in the Eastern Province, Saudi Arabia.
OVERVIEW OF ROLE
This position focuses purely on the Industrial Water Network - not general water networks supplying a city, but specifically on the Industrial Network.
Experience within an Industrial Network is essential and absolutely required for this role. The successful candidate will be an expert in this area.
KEY RESPONSIBILITIES
Preventive Maintenance
Develop and follow up on a standard preventive maintenance procedure for the facility instrument system and ensure its implementation by the maintenance contractor to minimize unscheduled breakdown of plant and equipment.
Performance Measurement
Monitor the performance of the Network against operational parameters by establishing KPIs and control the performance of the network section in order to support achievement of Industrial Water Department objectives
Contingency Plans
Prepare strategies and operation procedures for application during plant shut down / emergencies and outage of network facilities and find approval for implementation in order to ensure readiness to unplanned disruptions
Third Party Supervision
Provide supervision and monitor the performance of third party to ensure adherence to all operational procedures and work is carried out in a timely manner in line with required quality and safety precautions.
Problem Resolution
Inspect, evaluate and identify causes of operational problems/ defects and provide direction and technical support to third party supervisor/ technicians in order to execute the assigned job in an efficient and safe manner.
New system Implementations
Direct the installation of new systems/ equipment/ plant and test the performance in order to ensure they are installed properly and deliver the required results before acceptance and commissioning.
Reports
Prepare reports on a range of operational issues and technical feasibility studies related to the network and systems in order to ensure that senior management is updated regarding status of operations and provide information for decision making
Safety, Quality and Environment
Ensure that all relevant safety, quality and environmental procedures, instructions and controls are adhered to so that the safety of employees, quality of products/services and environmental compliance can be guaranteed.
Policies and Procedures
Communicate the requirement of operational procedures and instructions to subordinates and monitor their adherence so that work is carried out in a controlled manner.
COMPENSATION & BENEFITS
Salary will reflect interview performance and experience levels2019-12-10 11:03:15 |
Apply Now |
environmental engineer
INR7"YEARLY"
environmental engineerFull Time (5-15 Yrs )Confidential |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09the company is 8 years old with excellent track record working with big companies in Saudi Arabia, about 25 employees working there.the main business is remediation, sludge treatment and under ground water .need manager with marketing capability and to develop the company2019-12-10 11:03:15 |
Apply Now |
Oracle Projects Consultant
INR7"YEARLY"
Oracle Projects ConsultantFull Time (3-5 Yrs )Confidential |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09The Oracle Projects Consultant is responsible for successful delivery of Oracle ERP technology/process deliverable specifically around the projects modules ( Project Billing, Project Costing, Project Management) The Oracle Project Consultant will provide Oracle functional and configuration knowledge & manage client relationships within context of the individual role. Responsibilities include documenting requirements and actively participating in Post Production Support Activities in Oracle project modulesRequired * Bachelor's Degree * At least 3 years experience in Oracle Projects Module (Oracle Project Billing,Oracle Project Costing,and Oracle Project Management) * At least 1 years experience in Oracle R12 implementation * At least 1 years experience in project life cycle methodology * English: IntermediateDepartment: Information TechnologyNOTE: The Role is Located at Dammam, Saudi Arabia2019-12-10 11:03:15 |
Apply Now |
Piping Designer
INR7"YEARLY"
Piping DesignerFull Time (10-15 Yrs )Alrabiah & Partners Co |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Well-versed in design standards, codes (preferably American codes & standards) and calculations. Must be well versed in using computer programs and design programs for pipelines and process such as Caesar II, etc. Exp. in AutoCAD & Microstation will be an added advantage. 2019-12-10 11:03:15 |
Apply Now |
Lead Design Mechanical engineer.
INR7"YEARLY"
Lead Design Mechanical Engineer.Full Time (10-15 Yrs )Alrabiah & Partners Co |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Well-versed in design
standards, codes (preferably American codes & standards) and calculations.
Must be well versed in using computer programs like MS Office and mechanical
design programs for HVAC, pipe design, Fire Fighting Systems viz. Elite, HAP,
etc. 2019-12-10 11:03:15 |
Apply Now |
Project Manager (PMP Certified)
INR7"YEARLY"
Project Manager (PMP Certified)Full Time (15-20 Yrs )Confidential |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09He should have experience of working in an industrial or any large infrastructure projects including site supervision, site investigation, etc., with extensive management & technical knowledge. Preferably with 5 years active participation at a managerial position on high technology projects. Well-versed in MS Office and have knowledge of various computer programs.2019-12-10 11:03:15 |
Apply Now |
Civil engineering Job Opportunities in Saudi
INR7"YEARLY"
Civil Engineering Job Opportunities in SaudiFull Time (7-10 Yrs )Reach Group |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
10-12-2019 2020-03-091
Project Manager
2
Deputy Project Manager
3
Construction Manager
4
Locations Manager
5
Quality Assurance and Control ManagerÂ
6
Executive Secretary
7
Secretary
8
Project Control Manager
9
Senior engineer Schedules Planning & Follow-up
10
Contracts Manager
11
Senior Contracts Specialist
12
Risk Management Specialist
13
Cost Control Specialist
14
Senior Quantity Surveyor
15
Quantity Surveyor
16
Safety and Security Specialist
17
Senior Document Controler Specialist
18
Document Controler Specialist
19
Technical Office Manager
20
Structural Section Manager
21
Senior Structural / Civil engineer
22
Architect Section Chief
23
Senior Architect engineer
24
Electric Section Chief
25
Senior Electric engineer
26
Mechanic Section Chief
27
Senior Mechanic engineer
28
Senior Interior Design engineer
29
Roads engineer
30
Comunication engineer
31
Survey engineer
32
Landscaping engineer
33
Material Specialist
34
Geology Specialist
35
Logist Services General Coordinator
36
Accountant
37
Translator
38
Messenger
39
Area Manager
40
Assistant Area ManagerÂ
41
Structural Quality Control engineerÂ
42
Architect Quality Control engineerÂ
43
Electrical Quality Control engineerÂ
44
Mechanic Quality Control engineerÂ
45
Senior Structural Site engineerÂ
46
Senior Architect Site engineerÂ
47
Senior Electrical Site engineerÂ
48
Senior Mechanic Site engineerÂ
49
Structural Site engineerÂ
50
Architect Site engineerÂ
51
Electrical Site engineerÂ
52
Mechanic Site engineerÂ
53
Communications & Networks engineerÂ
54
Quantities SurveyorÂ
55
Structural ControllerÂ
56
Architect ControllerÂ
57
Electrical Controller 2019-12-10 11:03:15 |
Apply Now |
Design Coordinators GIS Substations (CIVIL, ELECTRICAL, MECHANICAL)
INR7"YEARLY"
Design Coordinators GIS Substations (CIVIL, ELECTRICAL, MECHANICAL)Full Time (7-17 Yrs )Al Mashariq Company |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Major
responsibilities are as follows:
Create
design documents and drawings for new HV 115KV or above substation construction
projects including wiring diagrams from schematics, generating bills of materials,
and applying field mark-ups of project as-built drawings with minimal
supervision
Perform
engineering support tasks such as relaying, lighting, load flow, and short
circuit calculations with minimal supervision
Apply
engineering application software to complete engineering tasks such as ground
grid design, relay coordination, transformer sizing, and load flow and short
circuit studies
Apply
engineering standards including NEC, NESC, NEMA, IEEE and ANSI
Communicate
and coordinate project activities with project engineer, customer
representatives, and others as needed.
Candidate
must have minimum of 7 to 10 years of experience on same position.
Bachelor
Degree in Electrical / Mechanical / Civil engineering
Knowledge of
industry codes and standards
Minimum of 7
years of experience with Substation Design
The ability
to interface effectively with clients, employees, and management team is
essential.
Computer
proficiency in Word, Excel, Project, and AutoCAD is required
 2019-12-10 11:03:15 |
Apply Now |
Sales engineer - HVAC Equipment, Outdoor
INR7"YEARLY"
Sales Engineer - HVAC Equipment, OutdoorFull Time (3-8 Yrs )Confidential |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Jeddah
Saudi Arabia
Saudi Arabia
0jeddah
|
10-12-2019 2020-03-09Develops long-term customer
relationships with assigned accounts such as contractors, consulting engineers
or owners. Works toward making our company the preferred supplier of HVAC
equipment.Develops, evaluates, and
discusses possible solutions with customer.Develops preliminary
project fulfilment schedule.Preparation and review of
the proposal.Responds to customer needs
by identifying systems, products, generating quotes and closing orders.Follow up Designing,
selecting, ordering, installation and commissioning the project to completion.Find new Customers within
the specified area.2019-12-10 11:03:15 |
Apply Now |
Protection engineer
INR7"YEARLY"
Protection EngineerFull Time (8-18 Yrs )Al Mashariq Company |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09·       Â
Experienced in
Substation (115kv or above GIS S/S) Protection & Control applications and
Automation solutions in Power system.
·       Â
Must be familiar
with latest modern digital relays and SCADA systems, relaying and metering, CT
sizing, interface between primary and protection
·       Â
Strong Protection
& Control Application knowledge having worked closely with Utilities in HV
& EHV sub stations.
·       Â
Product Selection
and positioning in the market.
·       Â
Testing &
Commissioning experience for 8 yrs in HV & EHV substations.
·       Â
Substation Automation
knowledge on IEC 61850 standard and its implementation experience.
·       Â
Tender
preparations/participations, Substation Automation standard awareness and
customer presentations.
·       Â
Influencing
tender specifications based on product strengths and System integration
capability.
·       Â
Pre-tender
technical meetings/discussions with customer.
·       Â
Good Presentation
and communication skills.
·       Â
Fluency in
English language is a must.
 2019-12-10 11:03:15 |
Apply Now |
Senior Drilling engineer - Rotational
INR7"YEARLY"
Senior Drilling Engineer - RotationalFull Time (8-15 Yrs )Premier Group |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Doha
Qatar
Qatar
0doha
|
10-12-2019 2020-03-09Responsibilities:
·        Â
Develop well engineering
solutions.
·        Â
Asses and manage risk involved
with projects from a technical and commercial standpoint.
·        Â
Lead HSE standards for all well
operations.
·        Â
Oversee and manage the
planning, designing and execution of well operations.
·        Â
Review and advise on future
developments using lessons learned.
·        Â
Support in delivering project
on time and in budget.
·        Â
Motivate, mentor and encourage
you team to optimum efficiency.
Requirements:
·       Â
Must be degree educated with a
relevant engineering degree.
·       Â
Have experience working in
multi-discipline team environments.
·       Â
Extensive experience in Well
engineering.
·       Â
Detailed knowledge of well
design theory and application.
·       Â
Significant field experience
managing crews on the rig.
·       Â
Proven track record delivering
projects safely, on time and within budget.
35/35 rotational role with a competitive day rate.2019-12-10 11:03:15 |
Apply Now |
Lab engineer/Technician
INR7"YEARLY"
Lab Engineer/TechnicianFull Time (3-12 Yrs )Propel Consult |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09·       Â
BSC Chemistry, science ,
physics
·       Â
Cementing formal schooling as
to chemistry and Cementing systems.
·       Â
3+Â years experience in the testing of Cementing
systems.
·       Â
HSE competent and Good Personal
skills
·       Â
Shall ensure that the lab
Equipment is calibrated and maintained as per procedures and ISO standards.
·       Â
Conversant and Computer
literate with all Microsoft Office programs.
·       Â
Capable to operate and
interpret results from CONTRACTOR proprietary software,
·       Â
Fluent in reading, writing and
speaking English.2019-12-10 11:03:15 |
Apply Now |
Senior Sales engineer
INR7"YEARLY"
Senior Sales EngineerFull Time (5-10 Yrs )Pan Gulf Holding |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
10-12-2019 2020-03-09Generate enquiries
through sales visits, clarify all techno-commercial aspects of enquiries,
prepare technical submissions, follow up approvals, receive and process orders,
coordinate order execution, submit invoices, collect payments, obtain customer
feedback, ensure customer satisfaction, reporting and marketing activities. Supervision,
Mentoring and Training of Sales engineers.2019-12-10 11:03:15 |
Apply Now |
Sales engineer
INR7"YEARLY"
Sales EngineerFull Time (2-7 Yrs )Pan Gulf Holding |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Generate enquiries
through sales visits, clarify all techno-commercial aspects of enquiries,
prepare technical submissions, follow up approvals, receive and process orders,
coordinate order execution, submit invoices, collect payments, obtain customer
feedback, ensure customer satisfaction, reporting and marketing activities.2019-12-10 11:03:15 |
Apply Now |
Precast Transportation Supervisor / Coordinator
INR7"YEARLY"
Precast Transportation Supervisor / CoordinatorFull Time (2-5 Yrs )Confidential |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Preparing
Loading / Transport Schedule as per Erection Program and available units.Analyse pertinent conditions that affect delivery, e.g. weather,
road conditions, etc., and take necessary actions to mitigate the effects of
such on the operation.Coordination with the Erection engineer and Stockyard Supervisor
for the required and available units.Ensure safety in all aspects of dispatch and delivery processes,
coordinate with the drivers in case of accident outside the factory premises.Liaise with governmental institutions, customer and other
interested parties that may require approval/permit/licenses prior to delivery.Monitoring the progress of dispatch and delivery.Prepare Delivery Notes for each delivered units.Maintain all records for dispatch and delivery.Prepare reports of delivery to the Projects Manager.2019-12-10 11:03:15 |
Apply Now |
Drive Test engineer
INR7"YEARLY"
Drive Test EngineerFull Time (2-8 Yrs )Adva Comm Associtaes |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Riyadh
Saudi Arabia
Saudi Arabia
0riyadh
|
10-12-2019 2020-03-09·       Â
Already resident in KSA with a transferable Iqama
·       Â
Experience on LTE-FDD, 3G and 2G technologies
·       Â
Experience of using a wide variety of test tools
including TEMS, spectrum analyzer, scanners
·       Â
Worked in a managed services environment
·       Â
Fluent English and Arabic language skills (written,
reading, speaking) are mandatory
·       Â
Minimum 2 year experience in KSA
·       Â
Flexibility to travel is essential
·       Â
Looking for an immediate start
·       Â
6 months extendable contract2019-12-10 11:03:15 |
Apply Now |
DESIGN engineerS FORM WORK
INR7"YEARLY"
DESIGN ENGINEERS FORM WORKFull Time (5-10 Yrs )Saudi Scaffolding Factory (SSF)- part of BINA Group |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09B.Tech., / B.E., in Civil or Structural engineering with three years of experience. Well versed with American and British standards. Proficient computer skills, including STAAD Pro. AutoCAD and MS Office tools. Should be able to perform manual calculation and also be able to hold technical discussion with customers when necessary2019-12-10 11:03:15 |
Apply Now |
Estimation engineer
INR7"YEARLY"
Estimation EngineerFull Time (2-3 Yrs )Al Kuhaimi Metal Industrial Limited |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09* Review inquiries, evaluate requirements by mentioning the specifications, quantities and types of products* Calculate material and labor cost and make-up* Place inquiries with suppliers for buy-out products* Require designs when necessary and calculate the cost* Process inquiries on time and quote the products as per the official price list and project specifications* Prepare pre-qualification documents and revise, if necessary* Prepare project comparison specification sheetsJob Specifications:* Graduate of engineering Course (Civil, Mechanical or Architecture)* Experience in estimation of manufactured products* Knowledge of door industries* Familiar with company products, processing work procedures, production processing, standards, fire rating codes* Language abilities (English and Arabic) must be above average* Computer literate (MS Word, MS Excel)2019-12-10 11:03:15 |
Apply Now |
Cost/Budget engineer
INR7"YEARLY"
Cost/Budget EngineerFull Time (10-15 Yrs )Alrabiah & Partners Co |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Bachelor’s Degree in engineering, Administration or closely related field. 10 years in project cost engineering experience in similar projects. Capable of evaluating and consulting on project cost accounting / forecasting issues and problems. 2019-12-10 11:03:15 |
Apply Now |
Senior Architect
INR7"YEARLY"
Senior ArchitectFull Time (10-15 Yrs )Alrabiah & Partners Co |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09He should have experience of working in an industrial or any large infrastructure projects including design & development, site supervision, site investigation, etc. Well-versed in design standards, specifications, codes (preferably American & British Standards) and calculations. Must be well-versed in using design software programs like 3D Max, AutoCAD, MS Project, MS Office, etc. and have knowledge in various computer programs.2019-12-10 11:03:15 |
Apply Now |
Urban Planner
INR7"YEARLY"
Urban PlannerFull Time (15-20 Yrs )Alrabiah & Partners Co |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Design, promote and
administer government plans and policies affecting land use, zoning, public
utilities, community facilities, housing, and transportation; Recommend
approval, denial or conditional approval of proposals; Determine the effects of
regulatory limitations on projects; assess the feasibility of proposals and
identify necessary changes; and create, prepare, or requisition graphic and
narrative reports on land use data, including land area maps overlaid with geographic
variables such as population density. Well-versed in design standards, codes
(preferably American codes & standards) and calculations. Must be well
versed in using design programs like 3D Max, AutoCAD, etc. and computer
programs like MS Office and other Excel programs2019-12-10 11:03:15 |
Apply Now |
Lead Design Electrical engineer
INR7"YEARLY"
Lead Design Electrical EngineerFull Time (10-15 Yrs )Confidential |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Well-versed in design standards, codes (preferably American codes & standards) and calculations. Must be well versed in using computer programs like MS Office and electrical design programs for lighting, ETAP, etc. (For Saudi Nationalty Only)2019-12-10 11:03:15 |
Apply Now |
Lead Design Telecom engineer
INR7"YEARLY"
Lead Design Telecom EngineerFull Time (10-15 Yrs )Confidential |
Eastern Province
Saudi Arabia
Saudi Arabia
0eastern province
|
10-12-2019 2020-03-09Well-versed in design
standards, codes (preferably American codes & standards) and calculations.
He must also have good knowledge in the design of Building Management Systems
(BMS) works with expertise in the overall of (Direct Digital Control of HVAC
systems, computer system security, all control & interlock wiring, communication
wiring), etc. Must be well versed in using computer programs like MS Office and
Communcation Design. 2019-12-10 11:03:15 |
Apply Now |
We have opening for two Senior Service Delivery engineers
INR7"YEARLY"
We have opening for two Senior Service Delivery EngineersFull Time (4-5 Yrs )Convate |
Al Madina Al Munawarah
,
Saudi Arabia
Saudi Arabia
0al madina al munawarah
Saudi Arabia
,
Not Mentioned
saudi arabia
0saudi arabia
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Jeddah
Saudi Arabia
Saudi Arabia
0jeddah
|
10-12-2019 2020-03-09Job Description - Service Delivery engineer
Manage McAfee IPS and Email Gateway Solutions in Enterprise level
Provide proactive support to customers
Analyze logsand resolve issue in timely fashion
Record and document all issues related to the customers
Maintain a friendly, open, approachable, positive attitude
Support of existing services located at customer sites
Coordinating with Vendor /Internal Team /Customer on new installs & changes
Interact with customers, suppliers & Internal teams
On-site set-up & test of software for new installs / changes as required
Participation in internal and external training
Maintain customer communications during the problem resolution
Support any customer visits required as part of sales and support process.
Escalate issues to manager as required
Experience
At least 4-5 Years experience in IT field.
Excellent knowledge of McAfee IPS, Email Gateway and ePO
Experience in a wide-range of computer operating systems and desktop software
Strong knowledge of IT Security
A strong working knowledge of networking, as well as installation, troubleshooting, upgrading, integration and client/server operations is required.
Excellent experience in Microsoft Servers and desktop OS.
At least two years of full time experience in customer care/customer support.
Ability to multi-task and prioritize job requirements
Excellent documentation and communication skills
Demonstrable knowledge of IT troubleshooting and administration
Good understanding of TCP/IP Networks.
Education
Master/Bachelor degree in computer sciences
McAfee Certified - preferred
MCSE 2003, 2008
CISSP - preferred
CCNASecurity
Regards,
Rashmi
Email ID : rashmi@convate.com
Contact Number : +91-99723343192019-12-10 11:03:15 |
Apply Now |
Mechanical Design engineer - Buildings
INR7"YEARLY"
Mechanical Design Engineer - BuildingsFull Time (7-10 Yrs )Dar Al Riyadh |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09This role is required by engineering & Architecture (DAR E & A)Design Division.
E & A - Design is one of the main divisions of Dar Al Riyadh Group which was established to meet the rising demand for architectural design in the Kingdom of Saudi Arabia. DAR E & ADesign is providing a full range of integrated professional services from Urban Design, Urban Planning, Master Planning, Project Management and Environmental, Civil, Electrical, Mechanical, Infrastructure Design. Presently DAR E & A is involved in the Kingdoms mega projects worth 25 Billion. Our clients include major Ministries, reputable private organizations and other international establishments.
About Your Job:
We are looking for candidates with design experience in building projects. The role responsibilites includes but not limited to:
Preparing design specifications and technical drawings, suitable solutions and estimate costs & timescales.
Liaising with others in the design team and with clients and contractors, detailed calculations to compute and establish manufacturing, construction, and installation standards and specifications2019-12-10 11:03:15 |
Apply Now |
Sr. Application engineer, Wellbore Construction
INR7"YEARLY"
Sr. Application Engineer, Wellbore ConstructionFull Time (5-8 Yrs )Baker Hughes |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Sr. Application engineer in Completion and Wellbore Internvention PL, Wellbore Construction sub product line.
KEY RESPONSIBILITIES/ACCOUNTABILITIES
Provide Technical and Operational support for the Liner Hanger product line(s).
Provide work instructions for field execution and workshop preparations.
Technical selling of key field product applications.
Well prognosis, and/or completion product performance.
Assist with prototype tool applications and new product market introductions.
Investigate unusual or unsatisfactory product performance to determine root cause and preventative action.
Complete advanced product line training.
Handle special projects as assigned. (Deep Water, ERDs, high rate gas production, multi discipline solutionsetc)
Conduct all business activities in accordance with Baker Hughes HSE policies.
Legal Compliance requirements and Baker Hughes Core Values.2019-12-10 11:03:15 |
Apply Now |
Fabrication Supervisor-Saudi Arabia
INR7"YEARLY"
Fabrication Supervisor-Saudi ArabiaFull Time (5-8 Yrs )McDermott |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Seat and apply standards of safety and quality relative to project requirements
Communicate fluently with colleagues and co-workers
Read and understand shop drawings, project specifications and procedures
Read and understand dimensional survey and be capable of taking correct remedial action
Look one week ahead in planning work for the crew
Utilize the 4 week look ahead in planning of work
Provide the leader men with the drawings and information required to do the work
Interface with the field engineer / production engineer to ensure material is available for the planned work
Set targets of production for each Leader man in his crew
Allocate work to each of the men allocated to the Supervisor based on the persons capabilities and qualifications
Drive those Supervisor is responsible for, to achieve progress
Take action where standards and targets are not met
Measure each mans output and advise that man of his performance / productivity
Address any issues of poor quality / productivity issues to supervisor
Ensure proper drawings and cut lists are issued to the relevant sections
Inform leader man of any revisions in drawings and cut lists
Coordinate the work schedules of sections and assure that it is maintained
Maintain supplies of material for the sections
Assure priorities are met as per planning
Supervise the team
Inspect job conforms to requirements
Observe work of fitters and take corrective action involving leader man when needed, to ensure good quality with speedy results
Keep all records of Dimensional checks carried out by Leader man
Confirm all dimensions are within tolerance
Recommend measures to improve production methods
Attend supervisors meeting every wednesday and be involved in schedule planning
Review schedule with the leader men on a regular day to day basis
Ensure equipment and tools are used properly and maintained in good working condition and request replacements when necessary
Maintain safety regulations and company policies
Attend crew safety meetings on Monday mornings
Observe employees at work for unsafe acts2019-12-10 11:03:15 |
Apply Now |
Senior Process Solutions Analyst Senior PIMS engineer
INR7"YEARLY"
Senior Process Solutions Analyst Senior PIMS EngineerFull Time (3-6 Yrs )Yokogawa Middle East |
Dammam
,
Saudi Arabia
Saudi Arabia
0dammam
Khobar
,
Not Mentioned
khobar
0khobar
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09Responsible for designing and delivering fully configured process solution systems including Information Management, Alarm monitoring and other MES layer systems as required utilizing Yokogawa and third party vendor products.Must be able deliver training and support to customers as determined by project and departmental forces.
Key Responsibilities & Accountabilities
Reporting to the Project manager or PIMS group engineering manager the candidate should be responsible for
1. Design of PIMS systems, including network, computer hardware, software specification and configuration of selected software products, and code module implementation
2. Installation, configuration and testing of Yokogawa products and selected 3 party vendor software products, including Windows operating systems
3. Generation of project lifecycle documentation
4. Delivery of customer support and product training as required2019-12-10 11:03:15 |
Apply Now |
Senior Structural Design engineer
INR7"YEARLY"
Senior Structural Design EngineerFull Time (9-12 Yrs )Dar Al Riyadh |
Eastern Province
,
Saudi Arabia
Saudi Arabia
0eastern province
Saudi Arabia
Not Mentioned
saudi arabia
0saudi arabia
|
10-12-2019 2020-03-09About E&A - Design
This role is required by engineering & Architecture (DAR E & A)Design Division.
E & A - Design is one of the main divisions of Dar Al Riyadh Group which was established to meet the rising demand for architectural design in the Kingdom of Saudi Arabia. DAR E & ADesign is providing a full range of integrated professional services from Urban Design, Urban Planning, Master Planning, Project Management and Environmental, Civil, Electrical, Mechanical, Infrastructure Design. Presently DAR E & A is involved in the Kingdoms mega projects worth 25 Billion. Our clients include major Ministries, reputable private organizations and other international establishments.
About Your Job:
We are looking for Senior Structure Design engineer with experience working in large building structures projects including High Rise, infrastructure projects .2019-12-10 11:03:15 |
Apply Now |
